6-1/2" Lite Air V1 Series 2-Way Component Speakers System
Product highlights
6.5" Lite Air Series Car Speakers • 2-Way Component System • Shallow Mount • 100 Watts Max • 50 Watts RMS • 4 ohm • Kevlar/Fiberglass Cone • Polyurethane Surround • Screw-Set Terminals • Neodymium Magnet Structure
Learn more about the litea6v1Shallow Mount meet Sound Quality:
For those that have a difficult time finding the perfect shallow mount speaker, the Vibe Audio Lite Air 6 is for you. This component speaker set includes a 6-1/2" woofer and a 3/4" silk dome tweeter. In-line to the speakers is a separate crossover that will accurately filter the sound frequencies so that the drivers are only receiving the frequencies that they are designed for. The result is cleaner sound that won’t damage the speakers over time. It means a long lasting and great sounding car speaker. The woofer cone is a stand out feature on these drivers. A woven fiberglass Kevlar cone is rigid and helps retain the high-end sound that these speakers produce.
A Fit for Any Vehicle:
Next to the breath-taking sound quality, the area where these speakers shine the most is in the slim mounting depth. At first listen, you would not expect these speakers to only have a 1-7/8” mounting depth. Supported by an alloy torsion basket and strengthened by a powerful neodymium magnet, the speakers retain strength and magnetic integrity. The use of these higher end materials doesn't mean the the price is raised either. All this shallow technology and high end materials are used, yet the price is reasonable for everyone. The shallow mounting depth enables a wider range of cars that will accommodate these speaker, however that does not mean that they are only used in shallow applications. These Vibe Audio Lite Air 6 speakers are perfect for any installation where quality speakers are needed.
Lite Air Speaker Specifications:
Priced Per Complete Component System: 2 midwoofers, 2 tweeters and 2 crossover networks.
Manufacturer:
Model Number:
LITEA6-V1
Weight:
6.00lbs
Internal SKU:
litea6v1
Internal Product ID:
28108
| 5 star |
|
50% |
| 4 star |
|
0% |
| 3 star |
|
50% |
| 2 star |
|
0% |
| 1 star |
|
0% |
| Durability | ||
| Value | ||
| Features | ||
| Design | ||
| Usability |
1st VIBE experience
Fed by a Soundstream Stealth 160wrms per channel, these sound pretty nice. Great value for the money! They are very thin, and I was concerned that they would be weak, but they sound every bit as good as my old MB quarts (which cost several times the $$). The midrange/midbass is impressive, and the tweeter is fairly smooth.
4 Stars for durability because
1. One midrange magnet straight FELL OFF. It was easy to epoxy it back in place, but somewhat alarming. SQ was unaffected, thankfully.
2. The mounting screws are lowest bidder china made items, they are the softest materiel ever, and two of them broke while threading them into pre-drilled holes.
18
found this helpful.sounds good
Replaced a set of infinity reference comps in my rear doors. I blew one of my tweeters on the infinity's so for $59 I couldn't lose. While instaling the comps the magnet assembly of the midrange fell off (its glued on). I decided to use the vibe tweeters and xovers with the infinity mids. The vibe audio tweeters sound better than the infinitys, but the vibe audio mids definitely do not compare. I tested the remaining vibe mid up against the reference mids and there is no comparison they bottom out xovere'd at 80 hz 24db /oct at about 75 watts while the infinitys take the full 125 watts rms my infinity kappa 4 pushes. overall the tweeters are worth the price. They're very efficient and sound smooth, I needed to fade to the front because I was hearing the rear comps over the the pg rsdc 6.5 comps I have in front. On a side note there isn't any tweeter attenuation but so far they blend very well with the rest of my system.
19
found this helpful.
NVX SDBSK2 1.38 Square Feet Damping Kit
Eliminates speaker panel distortion and reduces vibration, rattles, and squeaks!
(41)
$14.99
List price $18.74
NVX SDSK2 1.38 Square Feet Damping Kit
Eliminates speaker panel distortion and reduces vibration, rattles, and squeaks!
(104)
$9.99
List price $18.74
NVX SDBPRO20 20 Square Feet Damping Kit
Eliminates speaker panel distortion and reduces vibration, rattles, and squeaks! (4.5mm Thick)
$109.99
List price $143.99
NVX SDBBP40 36 Square Feet Damping Kit
Eliminates speaker panel distortion and reduces vibration, rattles, and squeaks! (91mil Thick)
(38)
$114.99
List price $131.99
Eliminates speaker panel distortion and reduces door vibration, rattles and squeaks!
(47)
$43.99
List price $47.99
NVX SDRLR1 Sound Damping Rubber Roller
Universal Professional Heavy Duty Roller for Sound Damping
(116)
$10.99
List price $13.99
NVX SDRLR2 Sound Damping Rubber Roller
Universal Professional Heavy Duty Roller for Sound Damping
(18)
$11.99
List price $14.99
NVX 25 ft. of True Spec 16 Gauge Speaker Wire
100% OFC wire with EnvyFlex metallic jacket and noise eliminating twisted-pair technology to provide crystal clear sound.
(52)
$19.99
List price $29.99
Belva 23 ft. of True Spec 16 Gauge Speaker Wire
100% Copper Clad Aluminum and PVC blended jacket for easy installation and high strand count for maximum audio quality
(18)
$12.99
List price $24.99
Belva BTK106 Trim Panel Remover
Six Piece Professional-Grade Installer Panel Removal Tool Kit for Car Stereo/Speakers
(40)
$14.99
List price $19.99
Belva BTK105 Trim Panel Remover
Five Piece Professional-Grade Installer Panel Removal Tool Kit for Car Stereo/Speakers
(69)
$11.99
List price $18.99
Universal 6.5" Speaker Grills Sold as Pair
Protect your speakers with these mesh grills
(8)
$10.99
List price $12.49
6-1/2" (13.5 cm) S-Series Speaker Grills
Protect your speakers with these mesh grills
$24.00
List price $30.00
