XR-Series 6-1/2" + 4", 3-way Component System
Product highlights
6-1/2" + 4" 3-Way Component System • 70W RMS • Mineral-filled polypropylene woofer cone • Butyl Surround • 1" Aluminum Tweeter • Frequency Response: 48Hz - 25kHz • Sensitivity: 93.5 dB
Learn more about the xr653cs
Internal Product ID:
2857
| 5 star |
|
100% |
| 4 star |
|
0% |
| 3 star |
|
0% |
| 2 star |
|
0% |
| 1 star |
|
0% |
| Durability | ||
| Value | ||
| Features | ||
| Design | ||
| Usability |
Best Bang for buck
These were by far the best speakers i have herd for the price. The 3-way is the way to go i have them running on a 300/4 jl amp and they scream. I can turn them up so loud its ridiculous, only the 4" needs the 1k range turned down.
6
found this helpful.JL Audio 3-way components!!!
For the price and sound quality you can't go wrong with these! I'm powering these with a RF P450.4 amp with input gain at half turn and no distortion.I know it can take alot more,but need to break them in slowly. I installed the JL XR653-CS 1" tweeters on the front corner of door,4" mids in stock location on dash and 6 1/2" in lower part of front door in my '06 Dodge Magnum. I'm planing on getting a second set just to make for even better imaging.1"Highs are not over powering,vocals on 4"mids very clear and 6 1/2"mid bass is very tight sometimes i just turn down the subs because its so good.
4
found this helpful.Amazing speakers!!
I got a pair of these with a JL audio 300/2 amp pushing them in my Infiniti G35. These speakers absolutly blow everything else away. The 3 piece component system is a bit difficult to install as most cars only have places for 2 pieces. Once installed though this system absolutly rocks!! Definatly reccomend it if you are looking for some serious high quality sound!
4
found this helpful.
Eliminates speaker panel distortion and reduces vibration, rattles, and squeaks!
Eliminates speaker panel distortion and reduces vibration, rattles, and squeaks!
Eliminates speaker panel distortion and reduces vibration, rattles, and squeaks! (4.5mm Thick)
Eliminates speaker panel distortion and reduces vibration, rattles, and squeaks! (91mil Thick)
Eliminates speaker panel distortion and reduces door vibration, rattles and squeaks!
100% OFC wire with EnvyFlex metallic jacket and noise eliminating twisted-pair technology to provide crystal clear sound.
100% Copper Clad Aluminum and PVC blended jacket for easy installation and high strand count for maximum audio quality
Six Piece Professional-Grade Installer Panel Removal Tool Kit for Car Stereo/Speakers
Five Piece Professional-Grade Installer Panel Removal Tool Kit for Car Stereo/Speakers
Best selling similar products
• 210 watts Peak Each, 70 watts RMS Each
• 1-13/16" Edge Driven Dome tweeters
• Polypropylene cone material
• Impedance: 2.3 ohm
• Sensitivity: 92 dB
$78.00
• 250 watts Peak Each, 125 watts RMS Each
• 1" Aluminum Dome tweeters
• Paper cone material
• Impedance: 4 ohm
• Sensitivity: 95 dB
$389.95
Rockford Fosgate Power T2652-S
• 200 watts Peak Each, 100 watts RMS Each
• 1" Aluminum Dome tweeters with integral suspension
• Carbon Fiber Polypropylene cone material
• Impedance: 4 ohm
• Sensitivity: 89 dB
$329.99
• 240 watts Peak Each, 80 watts RMS Each
• 1" Cloth Dome adjustable tweeters with threaded removable housing
• Polypropylene, Glass Fiber and Mica cone material
• Impedance: 4 ohm
• Sensitivity: 88 dB
$126.95
• 100 watts RMS Each
• 3/4" Silk Dome tweeters
• Mica Injected Polypropylene - MIPP cone material
• Impedance: 4 ohm
• Sensitivity: 94 dB
$299.99
• 75 watts RMS Each
• 1" Silk Soft Dome tweeters
• Mineral-Filled Polypropylene cone material
• Impedance: 4 ohm
• Sensitivity: 90 dB
$499.99
Infinity Kappa 603CF (INFSPKKA603CFAM)
• 330 watts Peak Each, 110 watts RMS Each
• 3/4" Silk Edge Driven Dome Tweeters
• Glass Fiber cone material
• Impedance: 3 ohm
• Sensitivity: 93 dB
$399.95
• 150 watts Peak Each, 75 watts RMS Each
• Compatible with select 2012-2024 Tesla Model S
• Reinforced Glass Fiber cone material
• Impedance: 2 ohm
• Sensitivity: 90 dB
$499.99
• 285 watts Peak Each, 95 watts RMS Each
• 1" Tetolon Soft Dome tweeters with neodymium magnets
• Semi-Pressed paper with Mica cone material
• Impedance: 4 ohm
• Sensitivity: 93 dB
$399.99
• 300 watts Peak Each, 35 watts RMS Each
• 1/2" Metallic Balanced Dome tweeters
• Polypropylene cone material
• Impedance: 4 ohm
• Sensitivity: 93 dB
$44.99
