See all parts that fit your 2018 GS300
8" Pro Audio Black Death Series Car Mid-Bass Driver
Product highlights
8" Black Death Series Mid-Bass Driver • 600W Max • 200W RMS • 4 ohm Impedance • Semi-Pressed Paper Cone Material • Dual-Roll Cloth Surround • Ferrite Magnet Structure
Learn more about the bdpro8mv1
3.5" Touchscreen Multi-Zone Digital Multimedia Receiver with Bluetooth for RV's
$189.99
List price $211.99
Multi-Zone Digital Audio Receiver with Bluetooth Audio Streaming for RV's
$179.95
Multi-Zone Digital Audio Receiver with Bluetooth Audio Streaming for RV's
$156.99
List price $174.99
10" Touchscreen Multi-Zone Digital Multimedia Receiver with Bluetooth for RV's
$250.00
List price $275.00
Audiophile Grade Drivers at Their Finest
For serious car audio enthusiasts, the Black Death series by Vibe audio delivers an audiophile sound like no other speaker on the market. These speakers were designed in England with precision tolerances and very specific materials that make an excellent speaker. The angular torsion basket will support the small parts of the motor and will dissipate heat quickly. The magnets that are used in the Black Death speakers are made of Ferrite for high and efficient power handling. The over-sized design of the dust cap provides more output than your average speaker of the same size. For an efficient and clear speaker that you can rely on, look no further than the Black Death series by Vibe Audio.Priced Individually
Best selling similar products
• 300 watts Peak Each, 150 watts RMS Each
• Polymide Horn Tweeters
• Treated Paper cone material
• Impedance: 4 ohm
• Sensitivity: 101 dB
(2)
$189.99
List price $227.99
Cerwin-Vega CVP8 (Sold Individually)
• 350 watts Peak, 170 watts RMS
• Treated Paper cone material
• Impedance: 4 ohm
• Sensitivity: 95 dB
$49.99
List price $59.99
DS18 PRO-X12MBASS (Sold individually)
• 1000 watts Peak Each, 500 watts RMS Each
• Paper cone material
• Impedance: 8 ohm
• Sensitivity: 96 dB
$131.95
List price $131.95
• 500 watts Peak Each, 250 watts RMS Each
• 1" Aluminum Bullet super tweeters with ferrite magnets
• Non-Pressed Paper cone material
• Impedance: 4 ohm
• Sensitivity: 94 dB
(4)
$139.95
List price $139.95
• 1600 watts Peak Each, 800 watts RMS Each
• Non-Pressed Paper cone material
• Impedance: 8 ohm
• Sensitivity: 99 dB
$129.91
List price $162.39
NVX VPRO65 (Sold Individually)
• 450 watts Peak Each, 225 watts RMS Each
• 1" Aluminum Bullet tweeter
• Competition Grade Paper cone material
• Impedance: 4 ohm
• Sensitivity: 97 dB
(4)
$74.99
List price $82.99
• 350 watts Peak Each, 250 watts RMS Each
• Paper cone material
• Impedance: 4 ohm
• Sensitivity: 99.2 dB
$129.00
List price $129.00
DS18 PRO-HY8.4B (Sold Individually)
• 500 watts Peak Each, 250 watts RMS Each
• IP55 water-resistant cone
• 1" Titanium Horn tweeter
• Water-Resistant Paper cone material
• Impedance: 4 ohm
• Sensitivity: 97 dB
(1)
$131.95
List price $131.95
Cerwin Vega CVMPCL6.5 (Sold Individually)
• 200 watts Peak Each, 100 watts RMS Each
• Polypropylene cone material
• Impedance: 4 ohm
• Sensitivity: 93.2 dB
(9)
$99.99
List price $119.99
Deaf Bonce Apocalypse AP-M67AC PRO (M67AC PRO)
• 600 watts Peak Each, 300 watts RMS Each
• Non-Pressed Paper cone material
• Impedance: 4 ohm
• Sensitivity: 102 dB
(1)
$209.90
List price $229.99
Manufacturer:
Model Number:
BDPRO8M-V1
Weight:
7.35lbs
Internal SKU:
bdpro8mv1
Internal Product ID:
37509
| 5 star |
|
100% |
| 4 star |
|
0% |
| 3 star |
|
0% |
| 2 star |
|
0% |
| 1 star |
|
0% |
| Durability | ||
| Value | ||
| Features | ||
| Design | ||
| Usability |
Pro Audio at it's finest.
As an spl competitor we are always confronted with the issue of the front stage keeping up with a staggering 150 db of bass. Well there are less then 10 products that can meet this problem head on. Vibe audio being one of the best choices for the sensitivity and with the lower ohm load there is no need to drive these with a monster amp to get the required input needed. I have four of these but at 152.5 and climbing I currently am running 2 and not only do they keep up they do it with STYLE! I have tested these extensively from IB, sealed and ported enclosures. If you want them to drop go ported to the 50hz range and they will hold together the gap that normally presents itself from 50 to 120hz. Sealed is ok and IB is ok if crossed at or above 70hz.
12 found this helpful
NVX XBAF8 8" Speaker Baffle Ring Kit
(Best Seller) Reduce panel vibration, increase midbass, reduce destructive waves, and get better sound!
(114)
$21.99
List price $34.99
NVX SDBSK2 1.38 Square Feet Damping Kit
Eliminates speaker panel distortion and reduces vibration, rattles, and squeaks!
(46)
$14.99
List price $18.74
NVX SDBPRO20 20 Square Feet Damping Kit
Eliminates speaker panel distortion and reduces vibration, rattles, and squeaks! (4.5mm Thick)
(4)
$109.99
List price $143.99
NVX SDBBP40 36 Square Feet Damping Kit
Eliminates speaker panel distortion and reduces vibration, rattles, and squeaks! (91mil Thick)
(39)
$114.99
List price $131.99
Eliminates speaker panel distortion and reduces door vibration, rattles and squeaks!
(50)
$39.99
List price $47.99
NVX SDRLR1 Sound Damping Rubber Roller
Universal Professional Heavy Duty Roller for Sound Damping
(125)
$10.99
List price $13.99
NVX SDRLR2 Sound Damping Rubber Roller
Universal Professional Heavy Duty Roller for Sound Damping
(19)
$11.99
List price $14.99
NVX 25 ft. of True Spec 12 Gauge Speaker Wire
100% OFC wire with EnvyFlex metallic jacket and noise eliminating twisted-pair technology to provide crystal clear sound.
(56)
$29.99
List price $49.99
Belva 23 ft. of True Spec 12 Gauge Speaker Wire
100% Copper Clad Aluminum and PVC blended jacket for easy installation and high strand count for maximum audio quality
(43)
$6.99
List price $14.99
Belva BTK106 Trim Panel Remover
Six Piece Professional-Grade Installer Panel Removal Tool Kit for Car Stereo/Speakers
(44)
$14.99
List price $19.99
Belva BTK105 Trim Panel Remover
Five Piece Professional-Grade Installer Panel Removal Tool Kit for Car Stereo/Speakers
(73)
$11.99
List price $18.99
7" Professional Navigation System with Live Weather, Fuel Prices, Traffic and Lifetime Map Updates
(1)
$129.99
List price $419.95
In-Dash 6.1" Double DIN Touchscreen DVD, CD, MP3, WMA Receiver w/ Built In Bluetooth and USB Port
(1)
$349.99
List price $579.95
4-Channel Motorcycle Amplifier Kit for Honda Gold Wing
(2)
$244.95
List price $399.99
Kick Panels to Mount 6.5" Speakers in 1967-1972 GMC Truck
$69.99
List price $0.00
Universal 3.5mm FM Transmitter for MP3 Players and CD Players
(3)
$31.95
List price $49.99
Woven Cotton Beanie w/ Sound Disk Speaker and Inline Microphone
$29.95
List price $60.00
Acrilic Sound Disk Sports Beanie with Built-In Headphones and In-Line Microphone
$29.99
List price $60.00
Cancel
Modern vehicles often require specific brackets, wiring harnesses, and mounting solutions. A fit guide ensures:
Whether you're replacing a factory stereo or upgrading your entire audio system, the Fit Finder eliminates uncertainty.
