600W Peak (120W RMS) 6.5" CS Series 2-way 4-ohm Coaxial Car Speakers
• 300 watts Peak Each, 60 watts RMS Each
• 1" Neo-Mylar Soft Dome tweeters on Kapton former
• Silver Alpha-Cellulose Poly cone material
• Impedance: 4 ohms
• Sensitivity: 88 dB
• 300 watts Peak Each, 60 watts RMS Each
• 1" Neo-Mylar Soft Dome tweeters on Kapton former
• Silver Alpha-Cellulose Poly cone material
• Impedance: 4 ohms
• Sensitivity: 88 dB
Priced Per Pair
Internal Product ID:
95229
| 5 star |
|
43% |
| 4 star |
|
29% |
| 3 star |
|
29% |
| 2 star |
|
0% |
| 1 star |
|
0% |
| Durability | ||
| Value | ||
| Features | ||
| Design | ||
| Usability |
Crisp and clean!!!
Awesome upgrade from factory!!My music was lacking highs were dull.Crunch 2 ways blew me away and brought my music back to life !!!Highs are crisp and words are clean!!! Thanks sonic electronix!!!
42
found this helpful.Great sound quality
Got them set up in the back dash and the sound is amazing compared to the stock paper speakers.
39
found this helpful.Great value
Fit in my 09 Versa but need to still be holes on the door panel to attach the speakers. Sound is fair.
40
found this helpful.cheap and shallow
The sound quality is ok at best. Just sounds like it doesn't produce the full range of sound. No lows and highs. Just very basic sound.
The look is good, the price is right. They work as they should.
39
found this helpful.Me like
Added them to my 1100 watt audiopipe and they are singing perfectly 2 way crossover in play it's sick
37
found this helpful.Sound is good, speaker wire is cheap.
I installed these speakers in a 1999 Jeep Cherokee. The speaker wire it comes with is junk in my opinion. Very thin and hard to work with. Once you strip the wire, it is so thin that it was nearly impossible to twist into the factory Jeep speaker wire in order to solder it. It was also too thin to use with crimp connectors. Thankfully I had some thicker speaker wire and connectors in my supply at home that I used. If you are installing these in a Jeep Cherokee as I did, they fit in the front doors with no problems using the factory drilled holes. As for the rear speakers, one new hole per speaker has to be drilled in order for it to work, making this not exactly a direct fit. Having a second person for the rear install is a great help, since the speakers are mounted on the ceiling. Once installed the sound is great and has decent bass for the size and price. I would recommend these, but would also recommend to purchase better speaker wire for your install.
36
found this helpful.
Eliminates speaker panel distortion and reduces vibration, rattles, and squeaks!
Eliminates speaker panel distortion and reduces vibration, rattles, and squeaks!
Eliminates speaker panel distortion and reduces vibration, rattles, and squeaks! (4.5mm Thick)
Eliminates speaker panel distortion and reduces vibration, rattles, and squeaks! (91mil Thick)
Eliminates speaker panel distortion and reduces door vibration, rattles and squeaks!
100% OFC wire with EnvyFlex metallic jacket and noise eliminating twisted-pair technology to provide crystal clear sound.
100% Copper Clad Aluminum and PVC blended jacket for easy installation and high strand count for maximum audio quality
Six Piece Professional-Grade Installer Panel Removal Tool Kit for Car Stereo/Speakers
Five Piece Professional-Grade Installer Panel Removal Tool Kit for Car Stereo/Speakers
Best selling similar products
• 300 watts Peak Each, 100 watts RMS Each
• 1/2" PEI (Polyetherimide) Balanced Dome zero-protrusion tweeters with neodymium magnets
• Polypropylene cone material with Extended Voice Coil (EVC) technology
• Impedance: 4 ohms
• Sensitivity: 90 dB
$71.96
• 90 watts Peak Each, 45 watts RMS Each
• 1/2" Piezo pole-mounted Silk Dome tweeters
• Vacuum Polypropylene cone material
• Impedance: 4 ohms
• Sensitivity: 91 dB
$69.99
• 250 watts Peak Each, 45 watts RMS Each
• 13/16 Silk Soft Dome tweeters
• Composite Polypropylene cone material
• Impedance: 4 ohms
• Sensitivity: 89 dB
$108.00
This item is frequently compared to these items
• The SA68 speaker adapters fit most aftermarket 5 1/4" and 6 1/2" speakers into a 6" x 8" factory opening
• Compatible with select 1950-2025 vehicles from Ford, Mercury, Mazda Vehicles
$7.99
• 5 1/4" / 6-1/2 Component/Coaxial Speaker to 6" x 8" Adapter
• Works with 6.5" Speakers
• Installs in 5x7" and 6x8" Locations
• Compatible with select 1991-2000 vehicles from Ford, Mercury, Lincoln Vehicles
$12.99
• The SA69 speaker adapters fit most aftermarket 5 1/4" and 6 1/2" speakers into 6 x 9" factory openings
$14.95
• 5-1/4" or 6-1/2" Speaker to 6" x 9" Mounting Hole Adapters
• Mount your pair of 5-1/4" or 6-1/2" speakers in a 6" x 9" mounting hole
$14.99
• Large Frame Speaker Baffles
• Made from a Waterproof Foam
• Greatly Enhances the Sound and Performance of the Speakers
• Reduces Panel Vibration
$14.99
• Small Frame Speaker Baffles
• For 6-1/2" Speakers
• Made from a Waterproof Foam
• Greatly Enhances the Sound and Performance of the Speakers
• Reduces Panel Vibration
$13.99
• Universal Speaker Baffles
• Works for 5-1/4" & 6-1/2" Speakers
• Durable ABS Plastic Construction
• Protects the Back of the Speaker
• Reduces Panel Vibration
• Blocks Road Noise
• Creates a Tight Acoustic Seal
$10.99
Verified purchase
