See all parts that fit your 2008 Beetle
Power Acoustik RW1-8 240W 8" Subwoofer Driver + Atrend 8TK Single 8" Truck Style Sealed Enclosure & 12 Gauge 7 Meter (23 Ft) Speaker Wire
• 600W Peak
• 240W RMS
• Single 4 ohm 2" 4-Layer Voice Coil on Aluminum Former
• Polypropylene Cone
• Ribbed Foam Surround
• Nickle Plated 8 Gauge Compression Terminals
• Woven Polypropylene Dust Cap
The RW1-8's Closed Cell Polyurethane Surround is the same compound used in the making of countless gasket and insulation products, known for its adhesive bonding properties. Reaper PU surrounds have built-in expansion pockets to flex and relieve stresses during extreme use. Surrounds of Reaper woofers are double overcast stitched directly to the cone surface. In addition to superior adhesives, overcast stitching improves the conventional bond between cone and surround.
Heat build-up is a leading cause of catastrophic woofer failure. Venting built into the T-Yoke, back plate, and voice coil extract and dissipate heat, ensuring Reaper woofers remain cool and going for longer play times. In addition, Reaper woofers use 1" long, 2" diameter 100% OFC Copper voice coils and vented Aluminum former to further handle, extract and dissipate any heat build-up, resulting in improved power handling.
For more information on the Thiele and Small Parameters, visit our T/S Parameters Article
Best selling similar products
Manufacturer:
Model Number:
RW1-8_8TK_BBSW127
Weight:
28.00lbs
Internal SKU:
rw18_8tk_bbsw127
Internal Product ID:
99183
Can't Go Wrong!
Truly exceptional wire at a great price. I like the blue polarity marking, makes setup a breeze. Wire appears to be high quality copper. I was a little worried about the wire holding it "rolled up shape" but after a few days of laying flat, the wire is now laying nicely and remains flexible. If I had to find a con it would be that this wire doesn't have much of any style. However that's not something you would be looking for at this price. I would recommend this wire!
61 found this helpful
great product
I couldn't be more satisfied. Highly recommended. I would shop there again.
49 found this helpful
Worked as intended.
I installed subs and used this wire to go from the subs to the amp. The insulation is pretty thick on this wire so I'm not sure the actual wire size is as advertised, but it worked for my application and the price was cheap compared to similar sized wire of a different brand. If I had another brand laying around I would compare the actual wire sizes...
56 found this helpful
very satisfied
I bought this wire for two 6x9 speakers in my 98 dodge ram I knew ot wouldnt b true 12 but for my 6x9s it would work just fine and it does. For $8 bucks who can complain? Well I guess some people can but they should know hitron or 8$ aint givin them true 12. Anyway I think its great wire and can be run for speakers or small subs.
54 found this helpful
Works fine - solders easy!
It may not be the expensive stuff but for my money I can't hear the difference. It's clean, it solders easily - what else do you need?
55 found this helpful
Wire is wire
Works for me, does what its supposed to.
54 found this helpful
Good
Good Quality Cable, Blue line down One side for Identifier, easy to see unlike some that is just writing.
FYI 25ft doesn't go very far, even in a small car.
52 found this helpful
ok
the wire is nice and thick but dont be fooled be the whole "oxygen free" gimic because once you cut the wire it is no longer "oxygen free" still great for the price though but there is better out there
53 found this helpful
Great for price
For the price, this wire can't be beat.
At 500+ watts, no audible distortion could be heard from the wires, and no interference was transmitted from the power lines.
Great for wiring on a budget!
51 found this helpful
Excellent Buy
Bought.this for a 4ch 600 watt Sony amp
Pushing 6*9 & 6 1/2 speakers
Easy to tell polarity so install is a breeze
Coating is a lil thick but still close to 12 ga wire
CANNOT BEAT THE VALUE
Ended up.buying the 100 ft roll too
50 found this helpful
Cancel
Modern vehicles often require specific brackets, wiring harnesses, and mounting solutions. A fit guide ensures:
Whether you're replacing a factory stereo or upgrading your entire audio system, the Fit Finder eliminates uncertainty.