See all parts that fit your 1966 2000c
10" Dual 4 ohm Power Series Stage 2 Subwoofer
10" Dual 4 Ohm Power Series Stage 2 Subwoofer • 1600W Max • 800W RMS • Anodized Aluminum Woofer • Thermo-rubber Surround • 3" Anodized aluminum 4 ohm dual voice coil • 153oz. triple stacked magnet
Learn more about the t210d4
3.5" Touchscreen Multi-Zone Digital Multimedia Receiver with Bluetooth for RV's
$189.99
List price $211.99
Multi-Zone Digital Audio Receiver with Bluetooth Audio Streaming for RV's
$179.95
Multi-Zone Digital Audio Receiver with Bluetooth Audio Streaming for RV's
$156.99
List price $174.99
10" Touchscreen Multi-Zone Digital Multimedia Receiver with Bluetooth for RV's
$250.00
List price $275.00
DS18 PRO-1.5KP10.4 (Sold Individually)
3000W Peak (1500W RMS) 10" PANCADÃO Series 4-ohm Mid-bass Speaker
$263.95
120W Peak (60W RMS) Cage Mount Speaker Pods with 1.75" Clamp
$399.99
120W Peak (60W RMS) Cage Mount Speaker Pods with 2" Clamp
$399.99
10" Dual 4 Ohm Power Series Stage 2 Subwoofer • 1600W Max • 800W RMS • Anodized Aluminum Woofer • Thermo-rubber Surround • 3" Anodized aluminum 4 ohm dual voice coil • 153oz. triple stacked magnet
Too Much Power To Handle
The T210D4 Power Series 10" Subwoofer by Rockford Fosgate has a peak power rating of 1600 watts and a RMS rating of 800 watts. With this much power you can rest assure that you will be the envy of your block, as you stroll down your street with some car rattling bass. Constructed with a hard anodized cone and dust cap for strength and durability the Power Series subs will keep going now matter how long your listening sessions last. Also equipped with Inductive Damping Heat Sink, that helps radiate heat to reduce the voice coil temperature and keeps the sub operating at a safe operating temperature when pumping out high amounts of SPL. If you are looking to take your car audio system to the next level, the T210D4 will not only overwhelm you but simply blow you away.
Aluminum Dust Cap & Cone
To increase the strength, weight, and thermal capacity of the subwoofer, a hard anodized cone and dust cap has been used. A Parabolic triangular cone support is used to reduce piston flex and cone distortion. The result is excellent heat transfer, reduced distortion, higher power handling, and a better sounding subwoofer!
IDHS: Inductive Damping Heat Sink
By securing the Inductive Dampening Heat Sink (IDHS) to the top of the magnet structure, Rockford Fosgate is able to improve the efficiency of their drivers. This is accomplished by reducing the amount of distortion and back Electro-Magnetic Force (EMF). The IDHS also radiates heat to reduce the temperature in the voice coil.
Reverse Mounting Compatible
The removable trim ring can be installed in the front or back side of the subwoofer. This enables the subwoofer to be mounted in either direction. No matter which way you install the subwoofer, it will still look great with a cosmetically finished look. Inverted mounting of the sub shows off the large magnet structure of this giant subwoofer.
Anodized Aluminum Voice Coil Former
By using an anodized aluminum voice coil former on their subwoofers, Rockford Fosgate is able to dissipate heat from the voice coil more efficiently. A hot voice coil can melt the adhesive bonds, which will lead to eventual subwoofer failure. The aluminum voice coil former acts as a heat-sink to dissipate thermal build-up on the voice coil cool during high SPL conditions.
Conforms to CEA-2031
Rockford Fosgate has built this subwoofer to conform to the CEA-2031 loudspeaker power handling industry standards. This means that you can trust the subwoofer to have the capacity to safely handle the continuous (RMS) power rating. Having a CEA-2031 power handling is important when matching a subwoofer to an amplifier because the power ratings are accurate.
Stitched Tinsel Leads
To improve the reliability and performance by reducing fatigue and possible shorting, Rockford Fosgate has stitched the tinsel leads to the spider. The multipoint periodic stitching lead wires reduce the mass of the tinsel leads to spread the stress over a greater area. This improves the reliability and performance of the subwoofer.
Best selling similar products
• Peak Power: 1200 watts
• RMS Power: 600 watts
• Impedance: Dual 4 ohm
• Polypropylene Cone
• Rubber Surround
• Mount depth: 3.23"
• Sensitivity: 83 dB
$249.99
List price $299.99
• RMS Power: 400 watts
• Polymer/Mica Composite Cone
• Rubber Surround
• Impedance: Dual 4 ohm
• Mount depth: 3.25"
• Sensitivity: 82.10 dB
(29)
$519.99
List price $519.99
• RMS Power: 300 watts
• Impedance: Single 4 ohm
• Mount depth: 4.90"
• Sensitivity: 84.07 dB
(68)
$139.99
List price $139.99
Manufacturer:
Model Number:
T210D4
Weight:
50.00lbs
Internal SKU:
t210d4
Internal Product ID:
8774
| 5 star |
|
100% |
| 4 star |
|
0% |
| 3 star |
|
0% |
| 2 star |
|
0% |
| 1 star |
|
0% |
| Durability | ||
| Value | ||
| Features | ||
| Design | ||
| Usability |
WOW
I have one of these in a vented enclosure powered by an RF P1000-1bd and damn this hits. The bass is so clean and deep. Previously I had a Type R powered by an MRP-M1000, and this thing puts the Type R to shame. This sub has a hefty price tag but at the end of the day you can't put a price on bass of this quality.
4 found this helpful
wow
wow. this is the most amazing sub I've ever seen. my friend has two of these and they hit hard with a 1600 watt amp. don't turn it up too loud because it blew his driver side window out no joke. if you don't mind the cost of this sub i would definitely recommend it.
4 found this helpful
10 outta 10
great buy these suckers pound!!! very good clear crisp bass the best ive had blew the jackhammer outta the water actually shattered my back window!!! i was gonna get another didnt have enough for a dual box n high powered amps so i figured id get 1 and put it the single box that i had an alphasonic in but only 1 of these is needed (btw the alphasonic was nothing compared 2 this!! the bass was garbage sounded like it was blown gives off a awful high pow pow bass instead of a low clear crisp boom boom bass alphasonic is not recommended at all) rockford fosgate and audiobon are the only brands that are worth the $ sucks tho cause they dont make audiobon anymore alphasonic does but if u can find an audiobon dont hesitate even if u have subs id grab for later down the road for when ur current ones blow or u decide u want something else hell if u r able 2 find some n grab them n try em out u might end up sticking with em trust me Ive have many systems over the past 10yrs n nothing beats those 2 brands of subs fosgate n audiobons have my heart 4 life lol no but seriously ull never b disappointed wit those 2 brands id put my house on it!!
3 found this helpful
LOUD
This are the loudest subs i have ever heard in my life. Nothing beats them. I have two and they are ridiculous. 100% worth the money.
2 found this helpful
NVX 25 ft. of True Spec 12 Gauge Speaker Wire
100% OFC wire with EnvyFlex metallic jacket insulates and protects against damage from extreme conditions.
(56)
$29.99
List price $49.99
Belva 23 ft. of 12 Gauge Speaker Wire
Ultra-flexible PVC blended jacket for easy installation.
(43)
$6.99
List price $14.99
Stinger's Roadkill sound dampening series is sure to kill unwanted road noise and rattles! Enough sound dampening for your whole trunk!
(9)
$155.99
List price $339.00
Stinger's Roadkill sound dampening series is sure to kill unwanted road noise and rattles! Enough sound dampening for the whole car!
(54)
$210.99
List price $519.00
Did you know sound dampening will reduce those annoying rattles and even increase your SPL?
(47)
$156.95
List price $187.44
NVX SDRLR1 Sound Damping Rubber Roller
Universal Professional Heavy Duty Roller for Sound Damping
(126)
$10.99
List price $13.99
NVX SDRLR2 Sound Damping Rubber Roller
Universal Professional Heavy Duty Roller for Sound Damping
(19)
$11.99
List price $14.99
12-Volt Deep Cycle AGM Battery Power Cell with 750-Max Amps
(8)
$119.99
List price $199.99
12-Volt Deep Cycle Sealed Non-Spillable Lead Acid AGM Battery Power Cell with 3300 Max Amps (BCI Group 34)
(87)
$419.99
List price $429.99
Mobile A/V Theater System with 6.4" LCD Monitor, VCR, RF Modulator, and Remote (KVPK4, KV-PK4T)
(1)
$59.97
List price $324.97
6-1/2" 2-way Component System (OZME180CS, OZ ME180CS)
(2)
$299.99
List price $649.99
NVX N-Series Front Door Speaker Upgrade Kit
6.5" N-Series 2 Way Coaxial Car Speaker Upgrade Kit for 1999-2003 Toyota Camry Solara
(180)
$70.99
List price $122.98
CXP Combo Series Professional 11U x 2U Combo Rack with 11 Slant Spaces & 2 Vertical Spaces Below
$259.99
List price $359.99
SMD VU-DIN LED Sound System Output Display by Steve Meade Designs
In-dash or Custom-Mount LED Sound System Output Display for Amplifier Voltage Readout (VUDIN)
$149.99
List price $134.99
Cancel
Modern vehicles often require specific brackets, wiring harnesses, and mounting solutions. A fit guide ensures:
Whether you're replacing a factory stereo or upgrading your entire audio system, the Fit Finder eliminates uncertainty.
