600W Peak (300W RMS) 10" W0v3 Series Single 4-Ohm Subwoofer
• 300 Watts RMS
• Sensitivity: 84.07 dB
• Mineral-Filled Polypropylene Cone
• Large Roll Surround
• Elevated Frame Cooling
• DMA Optimized Motor System
• Metallic Silver Frame Finish
Choose from any of our many bundles that include this product for even more savings!
JL Audio 10W0v3-4 10" Subwoofer + Belva 500W BXA5002 Amplifier + 8 Gauge Amp Kit
10" W0v3 Series Single 4-Ohm Subwoofer Package (Includes Sub, Amp, and Amp Kit)
(117)
$239.95
JL Audio JD250/1 + JL 10W0V3-4 Subwoofer + 8 Gauge Amp kit
10" W0v3 Series Single 4-Ohm Subwoofer Package (Includes Sub, Amp, and Amp Kit)
(115)
$349.98
• 300 Watts RMS
• Sensitivity: 84.07 dB
• Mineral-Filled Polypropylene Cone
• Large Roll Surround
• Elevated Frame Cooling
• DMA Optimized Motor System
• Metallic Silver Frame Finish
The W0v3 offers superb excursion capability, linearity and an overall performance output that puts it right at the top of its price class. The driver features a very beefy 2.0-inch diameter voice coil, a DMA-optimized motor system and JL Audio's patented Elevated Frame Cooling design - all purpose-engineered for enhanced power handling and reliability. What this also means, is your system will be immediately injected with the increase in output and better sound fidelity that one expects from a JL Audio product. In addition, excellent excursion capability and linearity allow it to reproduce sub-bass with striking extension and quality. When matched up with the proper power source, signal and setup the W0v3 is capable of a well rounded sound that is unparalleled by any other driver in its price range.
The 10W0v3 Subwoofer can be driven with as little as 75 Watts. However, for best audio performance it is recommended to run an amplifier capable of between 200 - 300 Watts of continuous power per driver, like the JL Audio XD300/1v2 or JL Audio JX500/1D. In addition, these subwoofers are optimized to operate in either a ported or sealed enclosure, needing only 0.65 cubic feet of air space in a sealed box and 1.125 cubic feet in a ported/vented enclosure. (Specific dimensions and figures can be found in the user manual, linked further below.)
DMA is JL Audio’s proprietary Dynamic Motor Analysis system and is aimed at delivering superior dynamic stability and low distortion. As a result of DMA optimization, W0v3 motors remain linear in motor force over an extreme range of excursion and also maintain a highly stable fixed magnetic field in the gap over a wide power range. This leads to tight, clean, articulate bass that also allows for extreme linear excursion, phenomenal power handling and control, control, control.
![]() |
![]() |
JL Model Comparison | |||||||||
---|---|---|---|---|---|---|---|---|---|
Model | RMS Power | Cone Material | Surround Material | Sensitivity (dB) | Frequency Response | Xmax (mm | Terminals | Made In America | |
W7 Series | 500-1500 Watts | Polypropylene | Foam Overroll | 82.7 - 86.3 | 15-250 Hz | 19-32 | Push Terminals | ![]() |
|
W6 Series | 600 Watts | Polypropylene | Rubber | 82.7 - 85.4 | 20-200 Hz | 19 | Push Terminals | ![]() |
|
W3 Series | 150-600 Watts | Polypropylene | Rubber | 80.5-87.90 | 20-250 Hz | 8.89-15.5 | Push Terminals | ![]() |
|
W1 Series | 150-300 Watts | Polypropylene | Rubber | 83.9-86.1 | 22-200 | 8-11 | Push Terminals | ||
W0 Series | 300-500 Watts | Polypropylene | Foam | 84-88.20 | 20-250 Hz | 11.4-12.7 | Push Terminals | ||
WX Series | 200 Watts | Polypropylene | Foam | 86-87.17 | 22-250 Hz | 10 | Spade Terminals |
Internal Product ID:
39835
great sub!
Great sub for the price!! Sounds amazing and because of the room I have under the back seat the sub is in a box that is half the size that JL calls for. I couldnt imagine how great it would sound in the right box!
49
found this helpful.Great little sub
I had one of these in a small sealed wedge box in a grand cherokee powered by a JL 100/2 amp bridged of course and it was great. Break in was short maybe 10 hours of play time and a bit of tweaking. Some settings every one thought i had a 12.
45
found this helpful.awesome sub
Can take a lot of power and has extreme excursion. Rather small depth wise for the amount of quality sound it produces. 1 is more than enough in my standard cab silverado with a kenwood 5 chanel amp
43
found this helpful.Nice sub
I just bought this from a shop around me. It is in a sealed box behind my seat in a regular cab s10. The bass boost on my amp is on zero and this speaker is still loud. I will go back and buy another and hopefully port the boxes and blow my doors off. I highly recommend
38
found this helpful.amazing sq!
I bought it for a sq build for decent kick drum thump, and it exceeded my expectations greatly. i was downsizing my build from two PSI 15's on 2kwrms, to this on ~320wrms am i'm not dissapointed! i built a box to jl spec but tuned to 28hz for a flatter, sq response curve. this dude dominates low lows and the xmax is ridiculous and no distortion! it is a very musical sub. the only downside is that i wish it had alittle tighter bass, but it could be the box, but my 6x9's in the doors handle that decently. buy this sub!
37
found this helpful.great seller, great product
Fast shipping, great product, great seller! Would highly recommend this seller
36
found this helpful.Awsome!
I'm using this JL Audio 10W0v3 -4 with a FLI 450S-2 in a Single 10" Sealed MDF Enclosure (10SQTC) and it rocks pretty hard! I have this rear firing in my 1996 jeep cherokee and it definatly compliments my JL 5.25's quite nicely. I have reviews written for the other two items written as well. Check them out!
36
found this helpful.great sub
I had the older model subs in my single cab truck and if these are any thing like those look out they are bad and hit hard.
36
found this helpful.JL Sub 10"
I bought this sub for my truck in January. Now 6 months later still hitting hard. If you want some bass in your vehicle but not overboard this is the sub to go. Hits good and catches most beats with a crisp sound. Overall well worth the money spent, would definitely buy another!!!!
34
found this helpful.JL Audio 10w3v4
All I have to say is badass. Enough said. Anything else is just bragging ;)
36
found this helpful.This product is temporarily out of stock. May we recommend...
• 800W Max
• 200W RMS
• Poly-Coated Paper Cone
• Foamed Rubber Surround
• Stamped Steel Shallow Mount Basket
• Vented Motor Structure
• Dual 2" 4-Layer Voice Coils
(2)
$69.95
• 300 Watts RMS
• Sensitivity: 84.07 dB
• Mineral-Filled Polypropylene Cone
• Large Roll Surround
• Elevated Frame Cooling
• DMA Optimized Motor System
• Metallic Silver Frame Finish
(51)
$149.99
NVX VCW104 Version 3 (VCW104v3)
• RMS Power Range: 650-800 watts
• Pressed Paper Cone Carbon Fiber Top
• Dual 4-ohm Voice Coil
• High Excursion Foam Surround
• Dual Progressive Spiders with Integrated Tinsel Leads
(53)
$149.95
• Mounting depth: 3.250 "
• Precision-built in USA at JL Audio’s Miramar, Florida factory
• Injection molded, mica-filled polypropylene cone
• Rubber Surround
• Cast Alloy Basket
• DMA-optimized motor design
• Very small sealed enclosure volume requirements
(18)
$449.99
• 700 watts Watts Peak
• 350 watts Watts RMS
• Carbon Fiber Reinforced Polypropylene Cone
• Butyl Rubber Surround
• Includes Depth Extension Clearance Plate
• Mounting Depth: 3-1/4"
(1)
$79.99
Save up to 10 different vehicles in your garage