Universal-Fit Audio for 1976 Ford Thunderbird

---

• Pair of empty single 1" tweeter pods
• Designed for C3 or C7 Tweeters (not included)
• Hard coated with a black anodized finish
• Easy mounting on almost any flat surface

• Complete 1/0 Gauge Amplifier Installation Kit
• For Amplifiers Up To 4000 Watts RMS
• 100% (OFC) Oxygen Free Copper
• Dual Twisted Pair 2-Channel RCA Cable
• Tinned conductors for corrosion resistance
• Pre-terminated seamless power and ground ring terminals
• ANL/Mini-ANL Fuse Holder with 300 amp fuse
• CEA-2015 and BC5W2 Compliant

• Accessory Power Module
• Designed for vehicles that do not provide accessory (switched) power
• Provides 12-volt DC output when voltage is at or above 13.5-volts

• Peak Power: 2000 watts
• RMS Power: 1000 watts
• Impedance: Dual 2 ohm
• Carbon Fiber Enhanced Non-Pressed Paper Cone
• Custom High Roll Foam Surround with black nylon stitching
• Mount depth: 6.30"
• Sensitivity: 82 dB (1W/1m)

• R500X1D 500W RMS Prime Series Class D Monoblock Amplifier
• BAK42 Complete 4 Gauge Amplifier Wiring Kit with 2-Channel RCA Interconnects (CCA Wiring)

• Shielded noise-rejecting Twisted-pair construction
• Heavy gauge OFC conductors ensure superior sound quality
• Split-tip Silver-Plated ends offer best in class signal transfer
• Molded ends equipped with colored channel identifiers

• HPP plating for superior corrosion resistance
•Custom tooled solid brass
• Allows additional power or ground connections
• Contains One (1) Terminal Bolt

• Pro Business 2-Way Walkie Talkies
• IP54-rated splashproof and weather-resistant
• 22 Channels and 88 Privacy Codes
• Voice-Activated Transmission (VOX)
• 18-hour lithium-ion battery

• JL Audio Tower Speaker Swivel Mounting Kit
• Clamp has an Inner Diameter of 1.660 Inches
• For M-Series and MX-Series JL Audio Tower Speakers
• 334 Degrees of Total Swivel Capability

• Retractable Top Mount Retractable Antenna
• 31" 4-Section Retractable Mast

• 2-Way 5-Button Replacement LCD Remote
• Up to 3000 feet of range (0.56 miles)
• Replacement remote for SP-302

• Peak Power: 1000 watts
• RMS Power: 350 watts
• Impedance: Dual 4 ohm
• Kevlar Reinforced Pulp Paper Cone
• High-Amplitude Multi-Roll (HAMR) Surround
• Mount depth: 4.56"
• Sensitivity: 83.7 dB

• Replacement tweeter diaphragm for premium gauge tweeters
• Specifically designed for HD14.FTD tweeters
• Direct replacement, easy installation
• Includes one (1) replacement tweeter diaphragm

• 2.0 Farad Power Capacitor
• Perfect for Systems up to 2000 Watts
• Audible Warning
• Red Voltage Display
• Mounting Brackets Included

• Swivel Mount Fixture
• For the VeX™ Enclosed Systems
• use to mount on a roll cage
• Low-profile, machined mounting fixtures
• For pipe diameter of 2.375" (60.3 mm)
• Designed to mount two VeX™ Pods
• American-made by Axia Alloys

• Peak Power: 800 watts
• RMS Power: 400 watts
• Impedance: Dual 2 ohm
• Pressed Paper Cone
• Pressed Foam Surround
• Mount depth: 4.98"
• Sensitivity: 82.4 dB

• 200 Amp Battery Isolator
• 200 Amps at 12V Continuous
• 300 Amps Surge
• Switching Power: 10 - 16 VDC

•Digital Optical Audio Connection Cable
• Digital Optical Audio Connection Cable
• Built-in Toslink Connectors
• Length: 3 feet

• Universal square terminal cup for speaker and subwoofer boxes
• Nickel-plated contacts improve signal transfer
• Installation is a breeze
• Rear connections secure with nuts
• Thumbscrew binding posts secure the connection

• 3/4 Inch Hole Plug
• 100 Pack
• 1" Head Diameter

• 3:1 Step Down With Adjustable Output
• DC Amplifier Turn On Trigger
• 160w Maximum Input Total (40w Per Channel)

• Complete 4 Gauge Amplifier Installation Kit
• For Amplifiers Up To 1200 Watts RMS
• Premium (CCA) Copper Clad Aluminum
• Helical Twist 5/6-Channel RCA Cable
• ANL/Mini-ANL Fuse Holder with 80 amp fuse
• Complies to American Wire Gauge standards

• One 1/0 - 4 AWG Input
• Four 4 - 8 AWG Outputs
• Forged and machined brass construction
• Marine-grade stannum plating
• High-temperature polycarbonate base

• Encore WK-4 Four Window Roll-up Kit
• Universal for vehicles with Alarm/Remote Start Systems
• Rolls up windows one at a time or all together when arming your vehicle's alarm or remote start
• Intelligent safety sensor
• Positive and Negative Triggers

• 1/4 inch
• refill package
• heat shrink < /br>

• Universal mini piezoelectric siren
• Loud warning sound
• Compact and discreet sizing
• Easy 2-wire connection
• Impact-resistant housing
• Universal compatibility
• Sold individually

• Peak Power: 1300 watts
• RMS Power: 650 watts
• Impedance: Dual 4 ohm
• Carbon Fiber Enhanced Non-Pressed Paper Cone
• Custom High Roll Foam Surround with black nylon stitching
• Mount depth: 5.31"
• Sensitivity: 83 dB (1W/1m)

• 12-volt Absorbent Glass Mat (AGM) Secondary Battery
• Sealed Absorbent Glass Mat (AGM) design
• Perfect for 750W car audio stereo systems
• Compatible with most vehicle applications

• Low-Profile Machined Fixtures
• Mounts VeX Pods to Roll Cage
• Pipe diameter fitment: 2.875"
• Color: Black

• 80 Amp Circuit Breaker
• Dust and splash proof
• Accepts 1/0 or 4 gauge wire
• Push button reset can also be used as a kill switch
• Easily mount on firewall or other panel

• Protect your battery from heat and keep it in position
• Constructed from heavy gauge steel
• Has holed flanges at the bottom for permanent mounting.

• Replacement LED headlight bulbs
• 3.1 inch (78.2mm) total length
• Heat sink 1.26 inch (32mm) diameter
• Good for tight applications
• Compact design doesn’t compromise performance
• H5202 LED Single Beam
• As cool or even cooler than the traditional LED bulbs

• RMS Power: 1500 - 3000 watts
• Impedance: Dual 1 ohm
• Double-pressed pulp Cone
• Nitrile Butadiene Rubber NBR Surround
• Mount depth: 10-1/8"

• Top mount adapters brackets for MasterCraft towers
• Works with ICON8X, REV8X, REV10X
• Also works with ICON8XM, REV8SXM, and REV10SXM via removable flat base mounts
• Includes (2) disc adapters and mounting screws

• 22/18 Gauge Nylon Crimp Cap
• Heat shrinkable Design
• Makes Crimping Wires Fast and Easy
• Offers a Solid Connection of Wires
• Gauge: 22/18
• Color: Clear
• Count: 25

• IPX7 rated Deutsch™ / Amphenol™ Element Ready™ connectors
• Controller illuminates up to 8 Color Optix™ speakers and/or subwoofers

• 100 Amp Circuit Breaker
• Dust and splash proof
• Type III circuit breaker
• Easily mount on firewall or other panels
• Use as an alternative to fuse holders and fuses

• 12-volt Sodium Car Audio Power Cell
• Sealed SIB (Sodium Ion Battery) design
• Perfect for 4000 - 5500 watt car audio stereo systems
• 4000 Cell Life Cycles at 80% DOD
• Ultra lightweight at only 9.9 lbs.

• Add-On Extension Port for 10" Loaded Subwoofer Enclosure
• Use in conjunction with Stinger TXTRB10
• 6dB add-on extension port module
• With sound dampening properties

• 2-Channel 8000 Series RCA Interconnect Cable
• 3 ft. Cable Length
• Stinger Audiophile Grade
• Double Twisted Pair Construction
• Black Protective Jacket
• Triple Braided Shielding
• Locking Split-Tip Connectors
• Molded Strain Reliefs

• 7.7" trim ring for sport grilles in M6 speakers
• M6 speakers sold separately
• Color: Cream

• 7.7" trim ring for sport grilles in M6 speakers
• M6 speakers sold separately
• Color: Satin Black

• 5/8" MDF (Medium Density Fiberboard)
• Perfect for tight spaces (trucks/hatchbacks)
• fits most 10" subwoofers
• fully carpeted
• fully caulked and sealed tight

• Male-female RGB solder connectors with heat sink
• Use with Stinger ENLIGHT10 and Race Sport COLORTRAIL LED Strip lights
• 8 Pack (4 male / 4 female)

• Power Wire Coupler
• Ultimate Power Delivery
• Corrosion Resistant Shoc-Krome Plating

• Universal 22" Double Row LED Light Bar
• Water-resistant IPX-67 Rating
• Flood/Spot Combo Beam Pattern
• Integrated epoxy-encapsulated electronics
• Includes rear/side brackets and mounting hardware hebd8

• Peak Power: 2000 watts
• RMS Power: 1000 watts
• Impedance: Dual 2 ohm
• Competition Grade Paper Cone
• Treated Foam Surround
• Mount depth: 6"
• Sensitivity: 81.0 dB

• Pulse Timer with Adjustable Delay
• Triggered by + or - Pulse, or State Change
• Adjustable Timer: 0 - 60 Seconds

• Shielded noise-rejecting double Twisted-pair construction
• Heavy gauge OFC conductors ensure superior sound quality
• Split-tip Silver-Plated ends offer best in class signal transfer
• Precision Machined “Locking” ends with colored channel identifiers
• Black nylon protective jacket minimizes friction and electromagnetic interference

• 50 Watts x 4 + 200 Watts x 1 @ 4 ohm
• 100 Watts x 4 + 350 Watts x 1 @ 2 ohm
• 200 Watts x 2 + N/A @ 4 ohm Bridged/Mono
• 5-Channel Amplifer
• Element Ready™ design protects against outdoor exposure
• Top Mounted Control Panel

• Universal Application
• 9.66” full view monitor with touch screen operation.
• Wide angle HD front and rear camera.
• Collision detection sensor automatically locks the video in the event of a collision.

• 3.5mm Auxiliary Audio Cable
• Compatible with any device with a 3.5mm auxiliary input or output
• Female to female extension adapter included

• 50 watts x 4 channel @ 4 ohm
• 45 watts x 4 channel @ 2 ohm
• Total RMS Power: 200 watts
• Class D 2 ohm Stable 4-Channel Amplifier

• 3.0 Farad Digital Capacitor
• Voltage Meter
• Impact Resistant Polycarbonate Cover
• Simple Mounting System

• JL Audio Tower Speaker Mounting Kit
• Clamp has an Inner Diameter of 2.50 Inches
• For JL Audio M880-ETXv3, M770-ETXv3 and MX770-ETXv3 speaker models

• Quick Disconnect
• Up to 4 Gauge Power Wire
• Polarity Identification for Safety

• 6" 4-pin RGBW hardwire pigtail adapter
• Designed for use with Metra RGB-CB2 (Sold separately)

• 12" Single Truck Ported Subwoofer Enclosure
• 3/4" Medium Density Fiberboard (MDF) construction
• Universal truck (wedge) enclosure design
• Miter and Dado construction
• Premium carpet finish
• Silver spring loaded terminal cups
• Glued and braced with fasteners
• Total box volume: 0.27 cubic feet

• Equalizer under dash mounting bracket
• Fits WS420-BT or WS220-BT equalizers (sold separately)
• Made with tough black billet brushed metal finish
• Mounting hardware and screws included