Universal-Fit Audio for 1977 Ford Bronco

---

• Double-DIN Dash Kit
• Painted scratch-resistant black
• High-Grade ABS plastic construction
• Original factory-like fit and finish
• Includes installation instructions

• 1” Aluminum Pro Audio Horn Tweeter
• 100 watts Peak Each
• 50 watts RMS Each
• 4 ohm Impedance

• 100 Amp Circuit Breaker
• Dust and splash proof
• Type III circuit breaker
• Easily mount on firewall or other panels
• Use as an alternative to fuse holders and fuses

• (2) 1/0 ga inputs for power
• (4) 4/8 ga MANL fused power outputs
• >Small Footprint with compact brass design
• All in one compact block

• 1 input for 2 output video signal splitter
• Hard aluminum body to protect the device
• Filters out incoming noises
• Small and compact size

• 1-Way 5-Button Replacement LED Remote
• Up to 1500 feet of range (0.28 miles)
• Replacement remote for SP-402

• Universal Fender Mount Side View Camera
• Mounting Style: Fender Mount
• Resolution: 976 x 496 (600TV lines)
• Camera Housing Color: Gray

• Digital 10 Farad Capacitor
• Bright Red LED Voltage Display
• Monitor System Voltage
• 12-16 Volt Operation / 18 Volt Surge
• Louder And Cleaner Bass Response

• 3" Dual View Dash Camera with 4K HD Video Resolution
• Includes a rear-view accessory camera
• Apple CarPlay and Android Auto support
• Loop-cycle recording
• Front Camera Resolution: 4096p x 2160p
• Rear Camera Resolution: 1920 x 1080p

• Replacement tweeter diaphragm for premium gauge tweeters
• Specifically designed for HD14.FTD tweeters
• Direct replacement, easy installation
• Includes one (1) replacement tweeter diaphragm

• HPM Series Fused Power Distribution Block
• Two 1/0 Gauge or 4 Gauge Inputs
• Four 4/8 Gauge Outputs
• Multiple Input/Output Design
• Protective Cover Included
• Corrosion Resistant Satin Chrome Finish

• Universal Rear View Backup Camera
• High-Resolution CMOS PC1089 Image Sensor
• Mounting Style: Top of License Plate Frame
• Viewing Angle: 170 ° (super wide viewing angle)
• Resolution: 510 x 496 
• Waterproof: Yes (IP67/68 waterproof)
• Night vision: Infrared LED's

• 12" Amplified Loaded Subwoofer System
• 400 watts RMS
• MTX TN250/1 amplifier included
• Selectable bass boost
• Speaker-level (high-level) inputs (adapter included)
• Wired remote bass level control

• Marine Grade Bluetooth Audio Controller/Receiver
• Designed for marine and powersports applications
• Bluetooth version 4.0
• Delivers CD-like sound quality wirelessly
• Membrane Switchpad

• Multi GM Battery Terminal
• One 1/0 Gauge, One 4 Gauge and Two 8 Gauge Outputs
• For Use with GM Side Posts or Stinger Batteries
• High Power Connection
• Works on Both Positive and Negative Terminals

• Ultra-Compact Battery Connector, Positive or Negative
• 10 - 4 Gauge
• High-Temperature Polycarbonate Cover
• Marine-Grade Stannum Plating

• Wired RGB lighting remote controller
• Designed for Alpine SPV-65RGB-CAN speakers
• 10 static colors and 4 dynamic modes
• Features memory hold function
• Made to fit UTV switch panel

• PMX-ANT AM/FM/WB Amplified 12V Antenna
• Universal AM/FM/WB Antenna
• Omnidirectional
• Quick Power Connect for Easy Installation

• 750W Max
• 250W RMS
• Polypropylene-Mica cone
• High-excursion poly-foam surround
• High-strength custom steel frame
• Progressive Wavelit Ribs (P.W.R.) cone design

• 600 watts x 1 channel @ 4 ohm
• 1000 watts x 1 channel @ 2 ohm
• Total RMS Power: 1000 watts
• Class D 2 ohm Stable Monoblock Amplifier

• 250 watts x 1 channel @ 4 ohm
• 350 watts x 1 channel @ 2 ohm
• 600 watts x 1 channel @ 1 ohm
• Total RMS Power: 600 watts
• Class D 1 ohm Stable Monoblock Amplifier

• Peak Power: 1600 watts
• RMS Power: 800 watts
• Impedance: Dual 2 ohm
• Enhanced Pressed Paper Cone
• High Roll Foam Surround
• Mount depth: 6.5"
• Sensitivity: 85 dB

• For OEM* & Aftermarket screens
• Turn signal camera activation timed to 12 seconds or continuous activation
• Selectable Rear View Camera Priority
• Selectable Turn Signal Cameras have priority over the rear

• Universal round terminal cup for speaker and subwoofer boxes
• Gold-plated contacts improve signal transfer
• Installation is a breeze
• Rear connections secure with nuts
• Thumbscrew binding posts secure the connection

• Extension cable perfect when installing an FM modulated multi-disc CD changer, or other FM modulated tuner like a Satellite Radio box
• Also works with hideaway "brain" units from multimedia receivers

• 100 watts x 6 channel @ 4 ohm
• 150 watts x 6 channel @ 2 ohm
• Bridged: 300 watts x 3 channel @ 4 ohm
• Total RMS Power: 900 watts
• Class D 2 ohm Stable 6-Channel Amplifier

• Tone Generator • Speaker Polarity Tester
• Perfect Troubleshooting and Testing
• Output Range of 0-8 Volts
• Includes RCA and Alligator Clips
• 9V Speaker Popper • Auto Shutoff

• Easily Interface a Vehicle with an All-In-One Solution
• Preloaded Interface Module with Remote Start Technology
• Compatible with Most Protocols, RF-Kits and Telematic Modules
• Equipped with 5 Built-In Relays
• Hassle-Free Installation

• Extremely durable fabric that will stand up to heavy usage
• Adhesive backing allows for an easier installation process
• Easy to cut, fit, and mold to desired shape or size
• Stain resistant
• Color: Black
• Carpet Thickness: 1/8 inch

• RGB RF Music Controller with Touch Activated Remote
• 6 multi-color modes and 5 music-lighting control modes
• Touch sensitive color wheel for color selection
• Working Voltage: 12-24V DC
• Receiver Range: 20-30 meters

• 1 Pair (1 negative, 1 positive) of. Side-Post to Top-Mount Battery Terminal Adapters
• Forged and machined brass construction
• Marine-grade, anti-corrosive Stannum plating

• 12-volt Absorbent Glass Mat (AGM) Powersports Battery
• Sealed Absorbent Glass Mat (AGM) design
• Perfect for 1500W audio stereo systems
• Compatible with most vehicle applications

• 6.5" Speaker grilles for Infinity REF607F
• Black steel mesh grille design
• Includes plastic trim rings and Infinity logo on grilles
• Will be shipped in a brown box

• Control volume, switch sources and zones
• Backlit rubber buttons
• IPX7-rated for water resistance
• Gauge mount style
• Works with NVX VMPS35

• Wired Bass Remote for select 2013-2025 Punch and Power amplifiers
• Includes bass knob, cable, mounting clip, mounting screws
• Controls level on rear outputs of 4-channel amplifiers
• Conveniently mount under dash, inside center console or glovebox

• Low-Profile Machined Fixtures
• Mounts VeX Pods to Roll Cage
• Pipe diameter fitment: 2.500"
• Color: Black

• 200-Amp continuous / 300-Amp surge
• Ideal for car stereo systems and mobile electronics
• Prevents the main starter battery from draining
• 10V to 16V DC operating range

• True Spec 12 gauge EnvyFlex Speaker Wire
• Silver-tinned OFC (100% Oxygen-Free Copper) material
• Color: Blue and Gray
• Translucent EnvyFlex flexible multi-strand construction

• Dual Knob Dual Surface Mount Housing Pod
• Mounting Option For use with: BAWPL, BA2USB, BAVTM
• Color: Black

• 60 Amp capacity
• Pure OFC Copper
• Compact strand orientation and high strand count
• Soft, flexible PVC Jacket

• Mounting clamp for Stealth soundbars with 0.75" square tubing
• Allows soundbar mounting to the roll cage or tower tubing
• CNC'd from billet aluminum for extra durability
• Includes mounting hardware

• 15" Single Ported Subwoofer Enclosure
• 3/4" Medium Density Fiberboard (MDF) construction
• Computer-designed CNC cut
• Total box volume: 3.50 cubic feet

• Universal heavy duty roller for installing sound deadening mats
• Compatible with NVX, Dynamat, and other brands
• Thick plated steel frame
• 2" solid, soft urethane rubber roller

• Two 12" Punch Series Stage 1 Subwoofers
• Kevlar Reinforced Paper Cone
• Tear and Fatigue Resistant
• Proprietary Spider Venting/Cooling Technique
• Solid 5/8" MDF Construction

• 200 Amp V12 Series 24K Gold-Plated Circuit Breaker
• Manual Reset Button
• 1/0 or 4 Gauge In/Out
• Water Resistant Housing
• 24K Gold-plated

• 7-Pack
• Vehicle Specific Mirror Brackets
• Works Exclusively with the Crimestopper Mirrors with 4.3" and 7" LCD Screens

• 12" Single Sealed Subwoofer Enclosure
• 3/4" Medium Density Fiberboard (MDF) construction
• Includes hardware to connect multiple ZERO 12 ENC boxes

• 10" Single Sealed Subwoofer Enclosure
• 3/4" Medium Density Fiberboard (MDF) construction
• Total box volume: 0.69 cubic feet
• Completely miter and dado end panels
• Premium carpeted finish
• Made in the USA

• 4" Titanium Pro-Audio Bullet Horn Super Tweeters
• 70 watts Peak Each
• 35 watts RMS Each
• 4 ohm Impedance

• Peak Power: 2250 watts
• RMS Power: 750 watts
• Impedance: Dual 2 ohm
• Kevlar Reinforced Pulp Paper Cone
• High-Amplitude Multi-Roll (HAMR) Surround
• Mount depth: 5.92"
• Sensitivity: 82.3 dB

• 300 watts x 1 channel @ 4 ohm
• 600 watts x 1 channel @ 2 ohm
• 800 watts x 1 channel @ 1 ohm
• Total RMS Power: 800 watts
• Class D 1 ohm Stable Monoblock Amplifier

• Multiple Band Radar and Laser Detector
• Long range detection
• 2nd generation false alarm filtering
• Built-in Digital Signal Processing (DSP)
• Sensitivity (SEN) button
• Defender database

• RMS Power: 400 watts
• Impedance: Dual 4 ohm
• Mica Injected Polypropylene - MIPP Cone
• Rubber Surround
• Mount depth: 3.5"
• Sensitivity: 84.11 dB

• Digital Signal Processing with Integrated Maestro CAN Interface
• Four channel high level inputs with signal sense turn on
• 18 Pin Analog Input and 16 Pin Analog Output Harness
• Interactive Tuning Interface Controlled via Android/iOS APP

• 6-Channel Speaker Level Inputs
• 6-Channel RCA Outputs
• Handles up to 40V (400 watts RMS)
• Provides up to 9.5 Volts of output
• Auto turn-on via DC offset or Audio detection 
• Load selection switch (20, 60, or 20K ohm)
• Wired remote bass level control included
• LED Clip indicator

• 3" Epic Pro Series 4-ohm Pro Audio Horn Tweeters
• 360 watts per pair / 180 watts Peak each
• 280 watts per pair / 140 watts RMS each
• 4 oz. Neodymium magnet motor structure
• 4-ohm impedance

• Surface Mount Flange for use with BAWPL, BA2USB, BAVTM

• Low-Profile Machined Fixtures
• Mounts VeX Pods to Roll Cage
• Pipe diameter fitment: 2.750"
• Color: Black

• Low-Profile Machined Fixtures
• Mounts VeX Pods to Roll Cage
• Pipe diameter fitment: 2.875"
• Color: Black