- Stereos
- Subwoofers
- Amplifiers & Processors
- Speakers
- Cameras & Driver Safety
- Video & GPS
- Alarms & Remote Start
- Installation & Accessories
- Interior Accessories
- Shop all Car Audio
- More stuff to love
SHOP BY CATEGORY See all
• Tone Generator • Speaker Polarity Tester • Perfect Troubleshooting and Testing • Output Range of 0-8 Volts • Includes RCA and Alligator Clips • 9V Speaker Popper • Auto Shutoff
The NVX XTGSP2 is perfect for safely troubleshooting and testing audio systems. Offers an output range of 0-8 volts at a variable 13 to 10,000 Hz tone for setting system levels, checking speaker x-over points, verifying connections and general trouble shooting. The XTGSP2 also has a 9v speaker popper for visually testing speaker connection polarity. Connections can be made via supplied RCA or alligator clips. It features an auto shutoff for extended battery life. It is a very small size, making it easy for hand held use and is also designed with rotary control knobs for easy tone and level adjustments.
Overall rating distribution
| 5 star |
|
80% |
| 4 star |
|
20% |
| 3 star |
|
0% |
| 2 star |
|
0% |
| 1 star |
|
0% |
By feature average rating
| Durability | ||
| Value | ||
| Features | ||
| Design | ||
| Usability |
brian
November 8, 2020
Awesome product
A must have for testing speakers. Very reasonably priced too.
9
found this helpful.Johnny
January 10, 2020
A must have for the audio nerd!
I bought this after watching Five Car Stereo and Sonic Electronics using this. Awesome multi function tool!
3
found this helpful.Anonymous
May 3, 2019
Good product
for those who want a small device that can search loudspeaker crossovers, this product is essential. it also allows to find cuts in rca cables as well as to see the polarities of speakers. a simple tool, easy to use. small concern: the user manual is not provided and explanations on the net are absent contrary to its concurent the PAC. however I recommend
3
found this helpful.Jeff
April 1, 2020
Cheap but effective
This is a very good way to double-check yourself it also has a test tone generator and is a lot cheaper than SMD products. This product will check speaker polarity pre out continuity and has test tone generator this is a good product the long one
3
found this helpful.Anonymous
May 15, 2019
tools are good
good tool for the $$. you can have a test tone for checking polarity on speakers to checking that your channels are left or right .
2
found this helpful.Best selling similar products
Six Function Digital Multimeter - BAMMD1
• Features easy-to-read 2" Digital display
• Updates 2.5 times per second
• Low battery indicator
• Over range indicator
• Includes two 24 in. 18 gauge CCA test leads
(2)
$7.95
SMD DD-1 Distortion Detector/Analyzer by Steve Meade Designs
Distortion Detector/Analyzer (DD1) • Distortion Detector's Circuitry Is 100% Analog • Distortion Detection Trigger Level > 1.0% Harmonic Distortion • Operating Range of Input Signal is 1.2Vrms – 125Vrms. (15,000 Watts at 1 ohm) Autoranging • Signal Present LED Trigger Voltage 750mVrms
(97)
$197.99
• Tone Generator • Speaker Polarity Tester • Perfect Troubleshooting and Testing • Output Range of 0-8 Volts • Includes RCA and Alligator Clips • 9V Speaker Popper • Auto Shutoff
(5)
$29.99
Tone Generator • Speaker Polarity Tester • Perfect Troubleshooting and Testing • Output Range of 0-8 Volts • Includes RCA and Alligator Clips • 9V Speaker Popper • Auto Shutoff
(1)
$42.99
SMD CC-1 Crossover Calibrator by Steve Meade Designs
Crossover Calibrator • Also Matches The Gain Settings On Amp(s) • Circuitry Is Digital Microprocessor Controlled • Crossover -3dB Point Accuracy +/- 0.25dB • Auto-Shut Off Timer
(17)
$185.99
Internal Product ID:
94724
