Universal-Fit Audio for 2002 Porsche Boxster

---

• Encore WK-4 Four Window Roll-up Kit
• Universal for vehicles with Alarm/Remote Start Systems
• Rolls up windows one at a time or all together when arming your vehicle's alarm or remote start
• Intelligent safety sensor
• Positive and Negative Triggers

• 25 ft. 12 Gauge Premium Series Speaker Cable
• Multi-speaker cable for long runs up to 4 Channels
• Ninth conductor can be used for remote turn-on connection
• OFC Copper for flexibility and conductivity

• LED Lighting System
• (6) 1-Watt LEDs
• ECE R10 Certified
• Available in white or amber
• Water-resistant IP65 rating
• 16 self-controlled patterns

• Positive or Negative Battery Terminal Clamp
• Connects to the positive or negative battery terminal
• Splits the connection to 3 outputs
• One 1/0 or 4 Gauge and two 4 or 8 Gauge outputs

• 39 Ohm Load Resistors
• Prevents Audio Shutdown and Distortion
• Compatible with most devices with speaker-level inputs
• Sold as a pair

• High-power White Rock Light Crawler Kit (8-piece Set)
• Seven impressive fade and strobe patterns
• Flexible mounting options and straightforward wiring
• Lumen measurement: 14000 lm
• IP67 waterproof rating

• self tapping bolt and washer
• FHS fuse holder
• gauge remote wire
• AWG butt connecter

• Easy-to-use bus/bar distribution block
• 6 Ring Terminal Connections
• Use when installing multiple amps
• 3/4" PVC body
• 1/4" aluminum bus bar
• 3/16" Clear acrylic cover
• Use as a grounding block or positive distribution

• Bulk Pack of T-Tap Connector
• For 12/10 Gauge (AWG) Wire
• Yellow
• Package of 50

• Swivel Mount Fixture
• For the VeX™ Enclosed Systems
• use to mount on a roll cage
• Low-profile, machined mounting fixtures
• For pipe diameter of 2.375" (60.3 mm)
• Designed to mount two VeX™ Pods
• American-made by Axia Alloys

• IPX7 rated Deutsch™ / Amphenol™ Element Ready™ connectors
• Controller illuminates up to 8 Color Optix™ speakers and/or subwoofers

• Polaris Ride Command Audio Adapter
• Compatible with select Polaris RZR, Ranger and General models
• Retains the factory Ride Command as source unit
• Utilizes built-in crossovers from Ride Command
• Harness plugs in to any amp (AMP-1, AMP-2, AMP-3) with RCA inputs

• See-through windows allow for easy inspection
• High-temperature, impact-resistant plastic casings
• Ultimate circuit protection
• High conductivity plating
• Maximum current transfer

• See 2-3 times further than stock lighting systems
• Increase stopping distance by 200%
• LED technology provides instant on/off light with no ramp-up time
• Fanless heat-sink technology

• 25 feet 1/0 gauge Power and Ground Wire
• Silver-tinned OFC (100% Oxygen-Free Copper) material
• Color: Blue

• 2-Channel Speaker Level Inputs
• Adjustable xBOOST corrects for bass roll-off
• Handles up to 30V (225 watts RMS)
• Provides up to 9.5 Volts of output
• Auto turn-on via DC offset or Audio detection 
• Load selection switch (20, 60, or 20K ohm)
• Wired remote bass level control included
• LED Clip indicator

• Video cable extension
• Designed for STZ-RF200WD

• Vented Dual 12" Speaker Enclosure
• 1/2" Medium Density Fiberboard (MDF) construction with black carpet finish
• 12 feet Speakon cable with 14-gauge OFC wire included
• Total box volume: 1.89 cubic feet

• 500 ft. (152.40m) 8 Gauge V12 Series Full OFC True Spec Power Wire
• Exceeds CEA and ANSI Specification for Wire Gauge
• Full Virgin OFC Copper Construction
• Ultra-flexible PVC Blended Jacket
• Color: Matte Silver

• Active line output converter
• All-analog circuit design
• Adaptable to most OEM amplifier outputs
• Input load switching
• Automatic turn-on function

• Universal Single DIN storage pocket
• Install Single DIN in a Double DIN dash opening
• Mounts above or below the stereo
• Painted to Match Factory Dash Color
• High-Grade ABS Plastic Construction
• Factory Style Texture

• Universal mini piezoelectric siren
• Loud warning sound
• Compact and discreet sizing
• Easy 2-wire connection
• Impact-resistant housing
• Universal compatibility
• Sold individually

• Single Amplifier 4 Gauge Power Installation Kit
• 800 Watts Max
• True to Gauge Power and Ground Cable
• Pure OFC Copper
• Fine-Strand Construction
• 80 Amp MAXI Fuse with Fuseholder

• IPX6 and IPX7 water rating
• Built-in ANT technology
• Easy-to-use buttons and LED lighting
• Available in Black

• 150 watts x 4 channel @ 4 ohm
• 250 watts x 4 channel @ 2 ohm
• Bridged: 500 watts x 2 channel @ 4 ohm
• Total RMS Power: 1000 watts
• CEA-2006 Compliant
• Class D 2 ohm Stable 4-Channel-Channel Amplifier

• 0.75" Replacement Diaphragm for MO75T2 Tweeter
• Specifically designed for MO75T2 (MO75TRK)
• Direct-fit design allows hassle-free installation
• Impedance: 2-ohm

• 1200 watts x 1 channel @ 4 ohm
• 1200 watts x 1 channel @ 2 ohm
• Total RMS Power: 1200 watts
• Class D 1.5 ohm Stable Monoblock Amplifier

• R500X1D 500W RMS Prime Series Class D Monoblock Amplifier
• BAK42 Complete 4 Gauge Amplifier Wiring Kit with 2-Channel RCA Interconnects (CCA Wiring)

8" Grille made specifically for the JL Audio 8W1v2, 8W1v3, 8W3v3 Sub • Provides the Best Protection Possible • Top-Notch JL Audio Quality • Metal Mesh Grille Painted Black

• Retractable Top Mount Retractable Antenna
• 31" 4-Section Retractable Mast

• One 1/0 - 4 AWG Input
• Four 4 - 8 AWG Outputs
• Forged and machined brass construction
• Marine-grade stannum plating
• High-temperature polycarbonate base

• 12" Single Truck Ported Subwoofer Enclosure
• 3/4" Medium Density Fiberboard (MDF) construction
• Universal truck (wedge) enclosure design
• Miter and Dado construction
• Premium carpet finish
• Silver spring loaded terminal cups
• Glued and braced with fasteners
• Total box volume: 0.27 cubic feet

• True Spec 12 gauge EnvyFlex Speaker Wire
• Silver-tinned OFC (100% Oxygen-Free Copper) material
• Color: Blue and Gray
• Translucent EnvyFlex flexible multi-strand construction

• HPP plating for superior corrosion resistance
•Custom tooled solid brass
• Allows additional power or ground connections
• Contains One (1) Terminal Bolt

• Quick Disconnect
• Up to 4 Gauge Power Wire
• Polarity Identification for Safety

• 200 watts x 1 channel @ 4 ohm
• 300 watts x 1 channel @ 2 ohm
• Total RMS Power: 300 watts
• Class D 2 ohm Stable Monoblock Amplifier

• RMS: 300W x 1 @ 4 ohm, 500W x 1 @ 2 ohm
• Total RMS Power: 500W
• CEA-2006 Compliant
• Remote PLC (Punch Level Control) Included
• Efficient Class-D circuit topology
• 4 Gauge Power Amplifier Installation Kit
• Ideal for Systems Up to 650 Watts
• Premium Power and Ground Wire Provides Optimal Power Transfer
• 2-Channel Twisted RCA Cables

• 12" Protective Subwoofer Grille
• Perfect for Use with NVX E-, N-, Vs-, SM-Series Subwoofers (ESW124, NSW122v3, NSW124v3, VSW122v3, VSW124v3, SMW12D4)
• Works with Most Other 12" Subwoofers
• High Quality Construction

• 400 feet 16 gauge K-Series Speaker Wire
• Silver-tinned OFC (100% Oxygen-Free Copper) material
• Color: Blue and Frosted Clear

• Manual Reset Design with High-Visibility Switch
• Suitable for use in marine engine compartments and fuel tank spaces
• Withstands immersion in water up to 1 meter deep
• Stainless Steel Connection Points

• Peak Power: 900 watts
• RMS Power: 450 watts
• Impedance: Dual 2 ohm
• Injection Molded Polypropylene Cone
• Ribbed Santoprene Surround
• Mount depth: 4-3/4"
• Sensitivity: 82.37 dB

• 200 watts x 4 channel @ 4 ohm
• 300 watts x 4 channel @ 2 ohm
• Bridged: 600 watts x 2 channel @ 4 ohm
• Total RMS Power: 1200 watts
• Class D 2 ohm Stable 4-Channel Amplifier

• 22/18 Gauge Nylon Crimp Cap
• Heat shrinkable Design
• Makes Crimping Wires Fast and Easy
• Offers a Solid Connection of Wires
• Gauge: 22/18
• Color: Clear
• Count: 25

• Accepts 1/0 or 4-Gauge Power Wire
• ANL Fuse Holder
• Anodized Finish

• 10" Single Truck Sealed Subwoofer Enclosure
• 3/4" Medium Density Fiberboard (MDF) construction
• Universal truck (wedge) enclosure design
• Miter and Dado construction
• Premium carpet finish
• Silver spring loaded terminal cups
• Glued and braced with fasteners
• Total box volume: 0.62 cubic feet

• 3/4 inch heat shrink tubing
• Made with polyoefin (black)
• Length: 4 feet

• Peak Power: 1200 watts
• RMS Power: 600 watts
• Impedance: Dual 4 ohm
• Enhanced Pressed Paper Cone
• High Roll Foam Surround
• Mount depth: 6.45"
• Sensitivity: 86 dB

• 8" Speaker Ring
• Made from 3/4" MDF
• Perfect for Custom Fiberglass Enclosures

• HPM Series Battery Terminal with Two 1/0 or 4ga Outputs
• (2) 1/0 Gauge or (2) 4 Gauge outputs
• Ultimate power protection
• Multiple output design
• Corrosion resistant satin chrome finish

• 7.7" trim ring for sport grilles in M6 speakers
• M6 speakers sold separately
• Color: Cream

• 7.7" trim ring for sport grilles in M6 speakers
• M6 speakers sold separately
• Color: Satin Black

• RMS Power: 250 watts
• Impedance: Single 4 ohm
• Mineral-Filled Polypropylene Cone
• Nitrile Butadiene Rubber NBR Surround
• Mount depth: 4.63"
• Sensitivity: 83.24 dB

• HPP plating for superior corrosion resistance
•Custom tooled solid brass
• Allows additional power or ground connections
• Contains One (1) Terminal Bolt

• Adds additional inputs to display to monitor(s)
• Works great with vehicles limited to only one video input
• Equipped with a noise resistant aluminum shield
• Kit includes module and male to male RCA cable adapter

• 14.8-volt Lithium Motorcycle and Powersports Battery
• Sealed Lithium Iron Phosphate (LFP) design
• Perfect for 2000 - 2500 watt audio systems
• Ideal for primary and secondary battery applications
• Compatible with motorcycle and powersports applications

• 5/8" MDF (Medium Density Fiberboard)
• Perfect for Tight Spaces (trucks/hatchbacks)
• Fits Most 12" Subwoofers
• 0.75 CuFt
• fully carpeted
• Fully Caulked and Sealed Tight

• Complete 8 Gauge Amplifier Installation Kit
• For Amplifiers Up To 600 Watts RMS
• Premium (CCA) Copper Clad Aluminum
• Helical Twist 2-Channel RCA Cable
• ANL/Mini-ANL Fuse Holder with 60 amp fuse
• Complies to American Wire Gauge standards