Universal-Fit Audio for 2004 Ford Ranger

---

• 10" Dual Sealed Subwoofer Enclosure
• 3/4" Medium Density Fiberboard (MDF) construction
• Internal box volume: 1.20 cubic feet
• Premium Black Carpet with Black NVX Logo

• 200 amp Battery Isolator and Relay
• Prevents primary battery discharge
• Maximum current transfer
• Extends battery life
• Universal 12V Applications

•Digital Optical Audio Connection Cable
• Digital Optical Audio Connection Cable
• Built-in Toslink Connectors
• Length: 3 feet

• Mesh grille for select NVX 12" subwoofers
• Does not work with NVX VC-series V3 subs
• Designed to fit NVX VC-series V1 and V2 subwoofers
• Pre-drilled bolt pattern

• Digital Bass Reconstruction Processor
• Dash-mount remote control
• Speaker level inputs

• Modified Sine Professional Grade Power Inverter
• 2500 watts RMS, 5000 watts Peak
• Includes direct to battery cables
• LED digital display indicator
• Rugged industrial design

• Peak Power: 2400 watts
• RMS Power: 800 watts
• Impedance: Dual 2 or 4 ohm
• Composite Paper Concave Cone
• Nitrile Butadiene Rubber NBR Surround
• Mount depth: 6.75"
• Sensitivity: 87.6 dB

• Low-Profile Machined Fixtures
• Mounts VeX Pods to Roll Cage
• Pipe diameter fitment: 2.750"
• Color: Black

• RMS Power: 1000 - 2000 watts
• Impedance: Dual 1 ohm
• Double-pressed pulp Cone
• UV-resistant Santoprene Surround
• Mount depth: 13-3/16"

• Spade Terminals
• 10 Gauge • 1 Red & 1 Black
• Nickel Plated
• Resealable Polybag

• Wire Gauge Reducer
• 0 AWG to 4 AWG
• Nickel Plated
• Deep Wire Recesses
• Ultimate Power Delivery

• Digital remote controller for select JL Audio Amplifiers and DSPs
• Connects to the JLID port on the TwK’s chassis
• Works with VXi amplifiers, FiX and TwK processors
• Will work with MVi amplifiers via MVi DRC adapter
• Includes knob with 35" cable, 18 ft. control cable, spacers, and screws

• 40 watts x 4 channel @ 4 ohm
• 50 watts x 4 channel @ 2 ohm
• Bridged: 100 watts x 4 channel @ 4 ohm
• Total RMS Power: 200 watts
• Class D 2 ohm Stable 4-Channel Amplifier

• Positive or Negative Battery Terminal Clamp
• Connects to the positive or negative battery terminal
• Splits the connection to 3 outputs
• One 1/0 or 4 Gauge and two 4 or 8 Gauge outputs

• Low Profile Ported Subwoofer System
• 150 Watts RMS
• Built-In Class D Amplifier
• Variable Bass Boost
• Speaker-Level Inputs
• Wired Remote Bass Level Control

• Solid Brass allows for maximum power transfer
• 8 Gauge opening
• Crimp-on style
• Ideal for many car audio applications

• Peak Power: 1000 watts
• RMS Power: 350 watts
• Impedance: Dual 4 ohm
• Kevlar Reinforced Pulp Paper Cone
• High-Amplitude Multi-Roll (HAMR) Surround
• Mount depth: 4.56"
• Sensitivity: 83.7 dB

• 6 ft (1.83 m) Marine Audio 4-channel Interconnect Cable
• Molded Connectors
• 100% Oxygen-Free Copper
• Nickel-Plated, Brass Contacts

• 12" Single Ported Subwoofer Enclosure
• 3/4" Medium Density Fiberboard (MDF) construction
• Internal box volume: 1.75 cubic feet
• Premium Black Carpet with Black NVX Logo

• Digital 10 Farad Capacitor
• Bright Red LED Voltage Display
• Monitor System Voltage
• 12-16 Volt Operation / 18 Volt Surge
• Louder And Cleaner Bass Response

• Ring Terminals
• 5/16" Opening
• 0/1 Gauge
• 1 Red & 1 Black
• Nickel Plated
• Resealable Polybag

• Universal Underdash CD Housing
• Premium underdash housing fully encloses the unit
• Quick conversion from 2-Shaft to DIN
• High-grade ABS Plastic

• Works with Mini ANL (MANL) or AFS Fuses
• Accepts 4 or 8 Gauge Wire
• All Brass Construction
• Polycarbonate Base and Cover

• Wired Bass Remote Controller
• Compatible with select AudioControl processors
• Dash-mountable or center-console installation
• Color: Black

• Power Wire Coupler
• Ultimate Power Delivery
• Corrosion Resistant Shoc-Krome Plating

• JL Audio Tower Speaker Mounting Kit
• Clamp has an Inner Diameter of 2.000 Inches
• For M-Series and MX-Series JL Audio Tower Speakers

• Peak Power: 1300 watts
• RMS Power: 650 watts
• Impedance: Dual 4 ohm
• Carbon Fiber Enhanced Non-Pressed Paper Cone
• Custom High Roll Foam Surround with black nylon stitching
• Mount depth: 5.31"
• Sensitivity: 83 dB (1W/1m)

• RMS Power: 1000 - 2000 watts
• Impedance: Dual 2 ohm
• Double-pressed pulp Cone
• UV-resistant Santoprene Surround
• Mount depth: 13-3/16"

• 75 watts x 4 channel @ 4 ohm
• 100 watts x 4 channel @ 2 ohm
• Bridged: 400 watts x 1 channel @ 4 ohm
• Total RMS Power: 800 watts
• Class D 2 ohm Stable 6-Channel Amplifier

• Shielded noise-rejecting Twisted-pair construction
• Heavy gauge OFC conductors ensure superior sound quality
• Split-tip Silver-Plated ends offer best in class signal transfer
• Molded ends equipped with colored channel identifiers

• Waterproof marine grade circuit breaker
• 100 Amp maximum current power
• Weatherproof construction
• Ignition protected

• 100 watts x 4 channel @ 4 ohm
• 150 watts x 4 channel @ 2 ohm
• Bridged: 300 watts x 2 channel @ 4 ohm
• Total RMS Power: 600 watts
• Class D 1 ohm Stable 4-Channel Amplifier

• 1/0-AWG / 4-AWG inputs
• Platinum plated
• Low-resistance, high-current ability
• Set screw style connection - no need for ring terminals

• Dual 1/0-gauge input and output to 1/0-gauge wire reducer
• Machined brass construction with Chrome finish
• Designed for aftermarket audio upgrades in any vehicle

• 12-volt Sodium Car Audio Power Cell
• Sealed SIB (Sodium Ion Battery) design
• Perfect for 2000 - 2500 watts car audio stereo systems
• 4000 Cell Life Cycles at 80% DOD
• Ultra lightweight at only 4.10 lbs.

• 12-volt Lithium Racing Battery
• Sealed Lithium Titanate Oxide (LTO) design
• Ideal use for stock or aftermarket alternators
• Includes XS Power Li1208 IntelliCharger

• High Conductivity Platinum Plating
• Maximum Current Transfer
• 200 Amp Rating
• ANL Style Fuse
• 1 Pack

• Rear View Mirror with Backup Camera Monitor
• Built-in Wi-Fi Miracast
• Monitor Screen Size: 7.4"
• Monitor Screen Type: LCD

• 6.5" Speaker grilles for Infinity REF607F
• Black steel mesh grille design
• Includes plastic trim rings and Infinity logo on grilles
• Will be shipped in a brown box

• 4 Gauge 4000 Series Power Amplifier Wiring Kit
• Designed Specifically for Car Audio Systems up to 1500 Watts
• Made from 100% Oxygen-Free Copper
• HyperTwist Wire Construction
• Tru-Spec Wire Gauge

• Extension Cable
• Length: 50 feet

• 750 watts x 1 channel @ 4 ohm
• 1500 watts x 1 channel @ 2 ohm
• Total RMS Power: 1500 watts
• Class D 1 ohm Stable Monoblock Amplifier

• 10" Protective Subwoofer Grille
• Perfect for Use with NVX E-, N-, Vs-, SM-Series Subwoofers (ESW104, NSW102v3, NSW104v3, VSW102v3, VSW104v3, SMW10D4)
• Works with Most Other 10" Subwoofers
• High Quality Construction

• 12" Amplified Loaded Subwoofer System
• 1000 watts RMS
• Includes one MTX Audio TN500.1 amplifier
• Variable bass boost
• Mono preamp output
• EBC wired bass level remote control

• IPX6 and IPX7 water rating
• Built-in ANT technology
• Easy-to-use buttons and LED lighting
• Available in Black

• Controls 1-2 mono-channel amps with a 3.5mm level controller input
• Compatible with PTRTP and Hideaway powered sub enclosures
• Compatible with WXA, KEY, CXA, PXA and KPX-series amps
• Flush or surface-mountable
• Heavy-duty aluminum design with laser etching
• Single knob with high-end, metal look

• Retain Factory Steering Wheel Controls with Aftermarket Stereo
• Compatible with More than 1700 Vehicles
• Works with Most Aftermarket Stereo Brands
• Assign Each Control a Secondary Function
• Program it Yourself with a Windows Based Computer

• 7.7" trim ring for sport grilles in M6 speakers
• M6 speakers sold separately
• Color: Satin Black

• Portable smart car battery charger and maintainer
• Single 15 amp output with clamp or bolt-on connection
• Supports 6 or 12 volt system
• Works on Lead-Acid, Wet, Gel, AGM, Calcium, Lithium (LiFePO4)
• Thermal, reverse, over charge, over current protection
• Charges multiple battery sizes and types

• 12" Amplified Loaded Spare Tire Subwoofer System
• 150 watts RMS
• Includes Class D Amplifier
• Compact and shallow design
• Variable Bass Boost
• Speaker-Level Inputs
• Wired Remote Bass Level Control

• Ideal for OEM non-amplified sound systems
• Designed to generate load and stabilize signal
• Installed between factory speakers and lime output converter
• Pre-wired with EIA standard wire colors for front and rear connections
• 60 Ohm input impedance
• 150W Maximum input voltage

• 50 watts x 4 channel @ 4 ohm
• 45 watts x 4 channel @ 2 ohm
• Total RMS Power: 200 watts
• Class D 2 ohm Stable 4-Channel Amplifier

• 15" Subwoofer Grille for Rockford Fosgate P2 and P3 models
• Black Gloss Finish
• Mesh Design for Maximum Protection

• 2-ch speaker-to-RCA converter, LOC
• Compatible with OEM radios that have short circuit protection
• Take as much as 55 watts of input and deliver up to 8 volts of output

• Black momentary switch with harness
• Rated at 5 amps
• IP67 waterproof rating
• 19mm (3/4") mounting hole size
• Yellow LED illuminated ring

• 700 watts x 1 channel @ 4 ohm
• 1000 watts x 1 channel @ 2 ohm
• 1000 watts x 1 channel @ 1 ohm
• Total RMS Power: 1000 watts
• Class BD 1 ohm Stable Monoblock Amplifier