Universal-Fit Audio for 2005 Ford Excursion

---

• JL Audio Tower Speaker Swivel Mounting Kit
• Clamp has an Inner Diameter of 1.660 Inches
• For M-Series and MX-Series JL Audio Tower Speakers
• 334 Degrees of Total Swivel Capability

• OBD2 plug in Bluetooth wireless bootloader
• Combines XKLOADER2 and XKLOADER3 functionality
• Supports DS4 echosystem Bluetooth flashing
• Includes all harness and programming tools necessary

• 220 watts x 4 channel @ 4 ohm
• 355 watts x 4 channel @ 2 ohm
• Bridged: 700 watts x 2 channel @ 4 ohm
• Total RMS Power: 1420 watts
• Class D 2 ohm Stable 4-Channel Amplifier

• 15-Amp Lithium-Ion Battery Charger
• Reliable and vibration-resistant design
• Divided into independent cells that ensure safety and prevents shorting out
• Built-in Battery Management System (BMS)
• Power Rating: 14.6V @ 15A

• 4 Gauge Power and Signal Installation Kit
• 100% Pure Crystal-Oxygen Free Copper (PC-OFC)
• FULL Spec Cable Meets or Exceeds AWG (American Wire Gauge) Requirements
• Includes Appropriate Wire Termination Hardware

• Wire Gauge Reducer
• 0 AWG to 4 AWG
• Nickel Plated
• Deep Wire Recesses
• Ultimate Power Delivery

• Swivel Mount Fixture
• For the VeX™ Enclosed Systems
• use to mount on a roll cage
• Low-profile, machined mounting fixtures
• For pipe diameter of 2.000" (50.8 mm)
• Designed to mount two VeX™ Pods
• American-made by Axia Alloys

• 100 watts x 4 channel @ 4 ohm
• 150 watts x 4 channel @ 2 ohm
• Bridged: 300 watts x 2 channel @ 4 ohm
• Total RMS Power: 600 watts
• Class A/B 2 ohm Stable 4-Channel Amplifier

• 12" Protective Subwoofer Grille
• Perfect for Use with NVX E-, N-, Vs-, SM-Series Subwoofers (ESW124, NSW122v3, NSW124v3, VSW122v3, VSW124v3, SMW12D4)
• Works with Most Other 12" Subwoofers
• High Quality Construction

• RMS Power: 400 - 800 watts
• Impedance: Dual 1 ohm
• Double-pressed pulp Cone
• UV-resistant Santoprene Surround
• Mount depth: 7-15/16"

• Peak Power: 1200 watts
• RMS Power: 400 watts
• Impedance: Single 2 or 4 ohm
• Glass Fiber Cone
• Rubber Surround
• Mount depth: 5.42"
• Sensitivity: 91 dB

• 610 watts x 1 channel @ 4 ohm
• 1280 watts x 1 channel @ 2 ohm
• 2000 watts x 1 channel @ 1 ohm
• Total RMS Power: 2000 watts
• Class D 1 ohm Stable Monoblock Amplifier

• ProWedge 13" W7AE Loaded Sealed Subwoofer Enclosure
• 3000W Peak
• 1500W RMS
• 3 Ohm Final Impedance
• High Grade Black Carpet Finish
• Engraved JL Audio and W7 Logos
• Rear Firing Design
• 10th Anniversary Edition W7 Subwoofer

• Swivel Mount Fixture
• For the VeX™ Enclosed Systems
• use to mount on a roll cage
• Low-profile, machined mounting fixtures
• For pipe diameter of 1.00"
• Designed to mount two VeX™ Pods
• American-made by Axia Alloys

• Subwoofer grille RGB LED light kit
• Fits Wet Sounds' REVO 12" marine subwoofers
• Includes LED strip and quick disconnect harness
• Ideal for marine or outdoor applications

• Mini ANL Fuse
• 40 Amp Rating
• Designed for Optimal Signal Transfer
• Package Includes 2 Fuses

• Peak Power: 500 watts
• RMS Power: 250 watts
• Impedance: Dual 2 ohm
• Mica Injected Polypropylene - MIPP Cone
• Poly-Foam Surround
• Mount depth: 4.319"
• Sensitivity: 87 dB

• 20 square feet tri-layer sound deadening kit
• Made with butyl rubber, aluminum foil, and foam
• Material Used: Vibration Dampener
• Material Thickness: 1/8"
• Install Location: Entire Vehicle
• Pack includes five 18" x 32" sheets

• 1/0-AWG / 4-AWG inputs
• Platinum plated
• Low-resistance, high-current ability
• Set screw style connection - no need for ring terminals

• 6x9" Punch V2 Surface Mount Speaker Mesh Grilles
• Designed for use in select Rockford Fosgate Punch V2 speakers
• Surface mount design installs directly onto mounting surface
• Ideal for applications that disregard grille height

• 100 watts x 4 channel + 500 watts x 1 channel @ 4 ohm
• 75 watts x 4 channel + 500 watts x 1 channel @ 2 ohm
• 700 watts x 1 channel @ 1 ohm (subwoofer output)
• Bridged: 150 watts x 2 channel @ 4 ohm
• Total RMS Power: 900 watts
• Class D 1.5 ohm Stable 5-Channel Amplifier

• Replacement Companion Remote Control
• White and Black Design
• 5 Rubberized Buttons
• Super Code 1-Way LE Transmitter
• Confirms the Commands you Send to the Vehicle with Bright LEDs
• Uses the 2016 3V Round Lithium Battery

• Complete 8 Gauge Amplifier Installation Kit
• For Amplifiers Up To 600 Watts RMS
• Premium (CCA) Copper Clad Aluminum
• Helical Twist 2-Channel RCA Cable
• ANL/Mini-ANL Fuse Holder with 60 amp fuse
• Complies to American Wire Gauge standards

• Accepts 1/0 or 4-Gauge Power Wire
• ANL Fuse Holder
• Anodized Finish

• Peak Power: 600 watts
• RMS Power: 300 watts
• Impedance: Dual 4 ohm
• UV-Treated Polypropylene Cone
• UV-resistant Santoprene Surround
• Mount depth: 2-11/16"
• Sensitivity: 81.8 dB

• Smooth powder-coated silver finish tower speaker fixed clamps
• Designed to fit tube diameters of 1-7/8" up to 3"
• Fits REV8, REV10, and ICON8 tower speakers
• Includes mounting bolts

• 8" Speaker Ring
• Made from 3/4" MDF
• Perfect for Custom Fiberglass Enclosures

• Replacement LED headlight bulbs
• 3.1"
• Heat sink 1.26 inch

• Replacement LED headlight bulbs
• 3.1 inch (78.2mm) total length
• Heat sink 1.26 inch (32mm) diameter
• Good for tight applications
• Compact design doesn’t compromise performance

• Replacement LED headlight bulbs
• 3.1 inch (78.2mm) total length
• Heat sink 1.26 inch (32mm) diameter
• Good for tight applications
• Compact design doesn’t compromise performance
• LED Single Beam
• As cool or even cooler than the traditional LED bulbs

• Universal Self-Adhesive Foam Speaker Baffle Ring Kit
• Waterproof automotive-grade high-density foam strips
• Prevents front and rear wave cancellation and panel vibrations
• Designed for use with 1" to 6x9" speakers
• Pack of 6

• 12-volt to 6-volt step down converter
• Provides proper voltage for a 6V factory backup
• Includes a wiring harness with three wires

• Dual terminal cups for high power speaker systems and enclosure
• Utilizes four large brass-lug terminals made for up to 8AWG wire
• Compatible for high power speaker system
• High power handling
• Non-conductive acorn protection cover included

• 750 watts x 1 channel @ 4 ohm
• 1500 watts x 1 channel @ 2 ohm
• Total Peak Power: 1500 watts
• Class A/B 2 ohm Stable Monoblock

• Peak Power: 600 watts
• RMS Power: 300 watts
• Impedance: Dual 4 ohm
• Paper Cone
• Foam Surround
• Mount depth: 3.79"
• Sensitivity: 81.5 dB

• Vented Dual 12" Speaker Enclosure
• 1/2" Medium Density Fiberboard (MDF) construction with black carpet finish
• 12 feet Speakon cable with 14-gauge OFC wire included
• Total box volume: 1.89 cubic feet

• Wired Bass Remote Controller
• Compatible with AudioControl LC8i, DQ61, DQ/DX and The Epicenter processors
• Dash-mountable installation
• Color: Black

• Bi-amplification available
• Three-position switch for tweeter level adjustments
• Hi-Boost control
• Extremely high quality bi-metallized polyester film capacitors
• Air wound inductors built on pure copper-wire
• High power rating Wirewound resistors
• Dimensions: 7.67" x 4.68" x 1.61"

• Solid Brass allows for maximum power transfer
• 8 Gauge opening
• Crimp-on style
• Ideal for many car audio applications

• Equalizer under dash mounting bracket
• Fits WS420-BT or WS220-BT equalizers (sold separately)
• Made with tough black billet brushed metal finish
• Mounting hardware and screws included

• 500 ft. (152.40m) 8 Gauge V12 Series Full OFC True Spec Power Wire
• Exceeds CEA and ANSI Specification for Wire Gauge
• Full Virgin OFC Copper Construction
• Ultra-flexible PVC Blended Jacket
• Color: Matte Silver

• 600W Single 10" Vented Subwoofer Enclosure
• 10" W6 Series Subwoofer
• 5/8" Medium Density Fiberboard with High-grade Automotive Carpet
• 2 Screw Terminals
• Enclosure Dimensions: 21-3/4" D x 12-1/4" W x 14" H

• Kits are assembled to ensure perfect fitment and alignment
• Each kit includes all new soft moving parts
• Impedance: Dual 2-ohm
• CA glue adhesive is NOT included

• For use with aftermarket sound systems or accessories like winches
• Single ANL fuse block
• Industrial-strength eight fuse holder
• Stainless steel hardware
• Also works in marine applications

• 10" Amplified Loaded Subwoofer System
• 350 watts RMS
• Built-In Class D Amplifier
• Variable Bass Boost
• Speaker-Level Inputs
• Wired Remote Bass Level Control

• Replacement Transmitter
• Works with APS997C, APS787C, APS687C, APS596C, APS510C
• 5-Button Design
• One-Way Transmitter
• LED Indicator

• Compatible with 2007-2018 Jeep Wrangler JK
• Provides a trigger (turn on) for your parking light
• Easy to install harness with wire labels

• 4 Gauge 6000 Series Complete Amplifier Wiring Kit
• Designed Specifically for Car Audio Systems up to 1750 Watts
• HyperTwist Wire Construction
• TruSpec Cables/Wires
• Pre-Terminated Power Connections
• Made From 100% Oxygen-Free Copper

• 6-Pin 6-pin RGB LED connector
• Designed for REV and ICON swivel clamp tower speakers (Sold separately)
• Includes a pair of TC3 swivel clamps
• Sold as Pair

• Peak Power: 800 watts
• RMS Power: 400 watts
• Impedance: Dual 4 ohm
• UV-Treated Polypropylene Cone
• UV-resistant Santoprene Surround
• Mount depth: 3-7/16"
• Sensitivity: 84.8 dB

• 1400 watts x 1 channel @ 4 ohm
• 2500 watts x 1 channel @ 2 ohm
• 3600 watts x 1 channel @ 1 ohm
• Total Peak Power: 5000 watts
• Class D 1 ohm Stable Monoblock Amplifier

• 2-Channel 6000 Series RCA Interconnect Cable
• 3 ft. Cable Length
• Stinger Audiophile Grade
• Twisted Pair Construction
• Blue Protective Jacket
• Mylar Shielding
• Split-Tip Connector
• Molded Strain Reliefs

• 12" Single Ported Subwoofer Enclosure
• 3/4" Medium Density Fiberboard (MDF) construction
• Internal box volume: 1.75 cubic feet
• Premium Black Carpet with Black NVX Logo

• Swivel Mount Fixture
• For PS650-VeX models
• Designed to mount two VeX Pods
• Patented and American-made by Axia Alloys
• Inner diameter of 1.750"

• 1/0 Gauge 6000 Series Power Amplifier Wiring Kit
• Designed Specifically for Car Audio Systems up to 4000 Watts
• HyperTwist Wire Construction
• TruSpec Cables/Wires
• Pre-Terminated Power Connections
• Made From 100% Oxygen-Free Copper