Universal-Fit Audio for 2008 Dodge Dakota

---

• 1.0 Farad Power Capacitor
• Perfect for Systems up to 1000 Watts
• Audible Warning
• Red Voltage Display
• Mounting Brackets Included

• Wireless remote control for remote-ready Alpine stereos
• 20 soft push-buttons for variety of control functions
• Siri voice assistant activation on paired iPhone
• Voice recognition mode when paired with other smartphones
• Utilizes IR (Infrared) to send commands wirelessly

• 100 watts x 4 channel @ 4 ohm
• 150 watts x 4 channel @ 2 ohm
• Bridged: 300 watts x 2 channel @ 4 ohm
• Total RMS Power: 600 watts
• Class D 2 ohm Stable 4-Channel Amplifier

• Shielded noise-rejecting Twisted-pair construction
• Heavy gauge OFC conductors ensure superior sound quality
• Split-tip Silver-Plated ends offer best in class signal transfer
• Molded ends equipped with colored channel identifiers

• Low-Profile Machined Fixtures
• Mounts VeX Pods to Roll Cage
• Pipe diameter fitment: 2.750"
• Color: Black

• Rear parking sensors with waterproof connectors
• Audible buzzer with volume adjustment
• Total Number of Sensors: 4
• Detection Distance: 1 feet to 5.9 feet

• Peak Power: 3000 watts
• RMS Power: 1500 watts
• Impedance: Dual 2 ohm
• Carbon Fiber Enhanced Non-Pressed Paper Cone
• Custom High Roll Foam Surround with black nylon stitching
• Mount depth: 8.19"
• Sensitivity: 88 dB (1W/1m)

•Video In Motion Bypass Module for select 2013-2017 Pioneer/Clarion/Jensen Radios
• Auto Parking Brake Bypass Interface
• Simple 3-Wire Installation
• Will Work w/Future Software Updates

• Dual Zone Proximity Sensor
• Dual zone sensing
• Protects both inside and outside of the vehicle
• Each zone is independently adjustable
• LED sensitivity test light
• Pre-wired 4-pin plug allows easy connection to all Omega systems

• Swivel Mount Fixture
• For the VeX™ Enclosed Systems
• use to mount on a roll cage
• Low-profile, machined mounting fixtures
• For pipe diameter of 2.375" (60.3 mm)
• Designed to mount two VeX™ Pods
• American-made by Axia Alloys

• 100 Amp Circuit Breaker
• Dust and splash proof
• Type III circuit breaker
• Easily mount on firewall or other panels
• Use as an alternative to fuse holders and fuses

• Control volume, switch sources and zones
• Backlit rubber buttons
• IPX7-rated for water resistance
• Gauge mount style
• Works with NVX VMPS35

• 150A ANL Fuse
• 2 Pack
• Nickel Plated
• Resealable Polybag
• Heavy Duty Construction

• 12" Amplified Loaded Subwoofer System
• 400 watts RMS
• MTX TN250/1 amplifier included
• Selectable bass boost
• Speaker-level (high-level) inputs (adapter included)
• Wired remote bass level control

• 15" Single Ported Subwoofer Enclosure
• 3/4" Medium Density Fiberboard (MDF) construction
• Internal box volume: 3.50 cubic feet
• Premium Black Carpet with Black NVX Logo

• HPM Series Fused Power Distribution Block
• Two 1/0 Gauge or 4 Gauge Inputs
• Four 4/8 Gauge Outputs
• Multiple Input/Output Design
• Protective Cover Included
• Corrosion Resistant Satin Chrome Finish

• IR Remote Controller for multimedia receivers
• Mode switch: AUD mode/DVD mode/TV mode
• Includes 2 AAA batteries

• 15" Single Ported Subwoofer Enclosure
• 3/4" Medium Density Fiberboard (MDF) construction
• Computer-designed CNC cut
• Total box volume: 3.50 cubic feet

• RMS Power: 1500 - 3000 watts
• Impedance: Dual 1 ohm
• Double-pressed pulp Cone
• Nitrile Butadiene Rubber NBR Surround
• Mount depth: 10-1/8"

• Master Ground Lug accepts multiple ground wires
• Stainless Steel lug with plated brass contact
• Aggressive star washers provide secure connection

• 1 Pair (1 negative, 1 positive) of. Side-Post to Top-Mount Battery Terminal Adapters
• Forged and machined brass construction
• Marine-grade, anti-corrosive Stannum plating

• JL Audio Tower Speaker Mounting Kit
• Clamp has an Inner Diameter of 2.50 Inches
• For JL Audio M880-ETXv3, M770-ETXv3 and MX770-ETXv3 speaker models

• Peak Power: 2250 watts
• RMS Power: 750 watts
• Impedance: Dual 2 ohm
• Kevlar Reinforced Pulp Paper Cone
• High-Amplitude Multi-Roll (HAMR) Surround
• Mount depth: 5.92"
• Sensitivity: 82.3 dB

• 250 watts x 1 channel @ 4 ohm
• 500 watts x 1 channel @ 2 ohm
• Total RMS Power: 500 watts
• Class D 2 ohm Stable Monoblock Amplifier

• 600W Peak
• 300W RMS
• Top-Quality MDF Construction
• Durable Dark Gray Carpet Finish
• Five-Way Binding Post Connectors
• Embroidered JL Audio Logo

• Universal Rear View Backup Camera
• High-Resolution CMOS PC1089 Image Sensor
• Mounting Style: Top of License Plate Frame
• Viewing Angle: 170 ° (super wide viewing angle)
• Resolution: 510 x 496 
• Waterproof: Yes (IP67/68 waterproof)
• Night vision: Infrared LED's

• RMS Power: 400 watts
• Impedance: Dual 4 ohm
• Mica Injected Polypropylene - MIPP Cone
• Rubber Surround
• Mount depth: 3.5"
• Sensitivity: 84.11 dB

• Peak Power: 1600 watts
• RMS Power: 800 watts
• Impedance: Dual 2 ohm
• Enhanced Pressed Paper Cone
• High Roll Foam Surround
• Mount depth: 6.5"
• Sensitivity: 85 dB

• 14-volt Lithium Battery
• Sealed Lithium Titanate Oxide (LTO) design
• Perfect for up to 6000-watt audio systems

• 3" Epic Pro Series 4-ohm Pro Audio Horn Tweeters
• 360 watts per pair / 180 watts Peak each
• 280 watts per pair / 140 watts RMS each
• 4 oz. Neodymium magnet motor structure
• 4-ohm impedance

Single conductor wire • Length: 500ft • Flexible jacket • Gauge: 18 Gauge •

• 80 Amp Circuit Breaker
• Dust and splash proof
• Accepts 1/0 or 4 gauge wire
• Push button reset can also be used as a kill switch
• Easily mount on firewall or other panel

• Accepts Up To 8 Gauge
• Dual Red Molded Design
• Compression Style Connection
• Expandable Quick Connection
• Shoc-Krome Plating

• 600 watts x 1 channel @ 4 ohm
• 1000 watts x 1 channel @ 2 ohm
• Total RMS Power: 1000 watts
• Class D 2 ohm Stable Monoblock Amplifier

• For OEM* & Aftermarket screens
• Turn signal camera activation timed to 12 seconds or continuous activation
• Selectable Rear View Camera Priority
• Selectable Turn Signal Cameras have priority over the rear

• 1-Way Remote Car Starter
• 4-Button Transmitter
• 1/4 mile (1320 ft.) range
• Features 2 auxiliary outputs
• Internal antenna and transmit LED
• Command buttons

• 6-Channel Speaker Level Inputs
• 6-Channel RCA Outputs
• Handles up to 40V (400 watts RMS)
• Provides up to 9.5 Volts of output
• Auto turn-on via DC offset or Audio detection 
• Load selection switch (20, 60, or 20K ohm)
• Wired remote bass level control included
• LED Clip indicator

• 12-volt Absorbent Glass Mat (AGM) Powersports Battery
• Sealed Absorbent Glass Mat (AGM) design
• Perfect for 1500W audio stereo systems
• Compatible with most vehicle applications

• Peak Power: 1000 watts
• RMS Power: 500 watts
• Impedance: Dual 2 ohm
• Enhanced Pressed Paper Cone
• High Roll Foam Surround
• Mount depth: 5.36"
• Sensitivity: 85 dB

• For Systems Up To 1200 Watts
• Bright Blue LED Voltage Display
• Improves Bass Response (SPL)