Universal-Fit Audio for 2011 Ford Flex

---

• Low-Profile Machined Fixtures
• Mounts VeX Pods to Roll Cage
• Pipe diameter fitment: 3.000"
• Color: Black

• JL Audio Tower Speaker Mounting Kit
• Clamp has an Inner Diameter of 1.315 Inches
• For M-Series and MX-Series JL Audio Tower Speakers

• Swivel mount clamp for ETXv3 tower speakers
• Designed to fit tower speakers or roll bars
• Sold as pair (2 swivel mount clamps)
• Inner clamp diameter: 1.90" (48.3mm)

• 250 watts x 1 channel @ 4 ohm
• 500 watts x 1 channel @ 2 ohm
• Total RMS Power: 500 watts
• Class D 2 ohm Stable Monoblock Amplifier

• 75 watts x 4 channel @ 4 ohm
• 100 watts x 4 channel @ 2 ohm
• Bridged: 400 watts x 1 channel @ 4 ohm
• Total RMS Power: 800 watts
• Class D 2 ohm Stable 6-Channel Amplifier

• Male to male audio cable
• Fits all standard Mini 3.5 mm (1/8 in.) jacks
• Pure OFC Copper Conductors with Polyethylene Dielectrics
• Machined Brass Connector Elements

• Swivel Mount Fixture
• For the VeX™ Enclosed Systems
• use to mount on a roll cage
• Low-profile, machined mounting fixtures
• For pipe diameter of 2.000" (50.8 mm)
• Designed to mount two VeX™ Pods
• American-made by Axia Alloys

• 6 ft (1.83 m) Marine Audio 4-channel Interconnect Cable
• Molded Connectors
• 100% Oxygen-Free Copper
• Nickel-Plated, Brass Contacts

•Dual 10" 10W0v3-4 Loaded Ported Enclosure
• 1200W Peak
• 600W RMS
• Top-Quality MDF Construction
• Durable Dark Gray Carpet Finish
• Five-Way Binding Post Connectors
• Embroidered JL Audio Logo

• Manual Reset Design with High-Visibility Switch
• Suitable for use in marine engine compartments and fuel tank spaces
• Withstands immersion in water up to 1 meter deep
• Stainless Steel Connection Points

• RMS: 250W Power Handling
• Mineral-Filled Polypropylene Cone
• Single 4 Ohm
• Vented Reinforcement Collar
• Elevated Frame Cooling
• Floating Cone Attach Method (FCAM)

• Water-Resistant Master MAXI Fuse Block
• 4 AWG to 8 AWG Power Wire
• Used In Under-Hood Applications For Amp Installation

• 500 Watts RMS
• Sensitivity: 84.87 dB
• 2 Ohm Final Impedance
• Injection-molded, mineral-filled polypropylene cone
• Nitrile butadiene rubber surround
•Customization trim ring
• Floating Cone Attach Method
• DMA Optimized Motor
• JL Audio's patented, chamber-coupled port design
• Gray carpet wrap
• fine-tuned through extensive real-world listening

• 150 watts x 4 channel @ 4 ohm
• 150 watts x 4 channel @ 2 ohm
• Bridged: 300 watts x 2 channel @ 4 ohm
• Total RMS Power: 600 watts
• Class D 1.5 ohm Stable 4-Channel Amplifier

• Low-Profile Fixture
• For M880-ETXv3, M770-ETXv3 and MX770-ETXv3 models
• Fixture is designed for late-model MasterCraft mounting only
• Sold in pairs

• Swivel Mount Fixture
• For the VeX™ Enclosed Systems
• use to mount on a roll cage
• Low-profile, machined mounting fixtures
• For pipe diameter of 1.50"
• Designed to mount two VeX™ Pods
• American-made by Axia Alloys

• Clear Anodized Surface Mounting Fixture
• Low-profile, machined, surface mounting fixtures
• Provides attachment points for the VeX™ Enclosed Systems to flat surface
• Sold by the Pair

• RMS Power: 150 watts
• Impedance: Single 4 ohm
• Mineral-Filled Polypropylene Cone
• Nitrile Butadiene Rubber NBR Surround
• Mount depth: 4.25"
• Sensitivity: 80.49 dB

• Sensitivity: 86.3 dB
• OverRoll™ Surround
• W-Cone
• Forced-Air-Cooled Aluminum Alloy Frame
• Radially Cross-Drilled Pole Piece
• Dual Ultra-Long Voice Coils
• Black Powder-Coating

• JL Audio Tower Speaker Mounting Kit
• Clamp has an Inner Diameter of 1.315 Inches
• For M-Series and MX-Series JL Audio Tower Speakers