Universal-Fit Audio for 2013 Buick Enclave

---

• Positive or Negative Battery Terminal Clamp
• Connects to the positive or negative battery terminal
• Splits the connection to 3 outputs
• One 1/0 or 4 Gauge and two 4 or 8 Gauge outputs

• Protect your battery from heat and keep it in position
• Constructed from heavy gauge steel
• Has holed flanges at the bottom for permanent mounting.

• 12" Single Truck Ported Subwoofer Enclosure
• 3/4" Medium Density Fiberboard (MDF) construction
• Universal truck (wedge) enclosure design
• Miter and Dado construction
• Premium carpet finish
• Silver spring loaded terminal cups
• Glued and braced with fasteners
• Total box volume: 0.27 cubic feet

• Swivel Mount for MB Quart Speakers
• Fits NT1, NT2, NHT1 Speakers
• Lock Nut Secures Adjustments
• Attaches Between Speaker Pod and Mounting Bracket
• Sold Individually

• 200 watts x 2 channel @ 4 ohm
• 300 watts x 2 channel @ 2 ohm
• Bridged: 600 watts x 1 channel @ 4 ohm
• Total RMS Power: 600 watts
• Class D 2 ohm Stable 2-Channel Amplifier

• 2-Channel Ground Loop Isolator
• Eliminates Noise and Static

• 1-Way Remote Car Starter
• Includes (2) 1-way LED transmitters
• 1/4 mile (1320 feet) range
• Internal antenna
• Active transmit LED
• Command buttons

• self tapping bolt and washer
• FHS fuse holder
• gauge remote wire
• AWG butt connecter

• Shielded noise-rejecting Twisted-pair construction
• Heavy gauge OFC conductors ensure superior sound quality
• Split-tip Silver-Plated ends offer best in class signal transfer
• Molded ends equipped with colored channel identifiers

• Marine Black Box LED Lighting Controller
• 4 Independent marine lighting zones
• Powers up to 500 watts of LED lights
• Wet Sounds WS-MC-1 marine media receiver required, sold separately
• Operating Voltage: 10-30 volts DC

• Vented Dual 12" Speaker Enclosure
• 1/2" Medium Density Fiberboard (MDF) construction with black carpet finish
• 12 feet Speakon cable with 14-gauge OFC wire included
• Total box volume: 1.89 cubic feet

• Digital remote controller for select JL Audio Amplifiers and DSPs
• Connects to the JLID port on the TwK’s chassis
• Works with VXi amplifiers, FiX and TwK processors
• Will work with MVi amplifiers via MVi DRC adapter
• Includes knob with 35" cable, 18 ft. control cable, spacers, and screws

8" Grille made specifically for the JL Audio 8W1v2, 8W1v3, 8W3v3 Sub • Provides the Best Protection Possible • Top-Notch JL Audio Quality • Metal Mesh Grille Painted Black

• IPX6 and IPX7 water rating
• Built-in ANT technology
• Easy-to-use buttons and LED lighting
• Available in Black

• Easy two wire hook up
• Small and easy to mount
• 40 kHz and 56 kHz operation
• Great for RV's, marine, custom hot rods and many other applications

• Ultra Compact Wireless CB Radio
• Dual-mode AM/FM function
• Hardware or 12 volts power option
• Auto power function
• Time out timer via PTT button
• Auto squelches background noise
• Microphone channel control
• External speaker jack
• Illuminated light blue LCD display

• Bulk Pack of T-Tap Connector
• Allows for fast and easy splicing of wires
• Quickly tap into wires and cables
• Designed for tapping into 22/18 Gauge (AWG) wire
• Color: Red

• 3" Apocalypse Series Tweeters
• 70 watts Peak Each
• 35 watts RMS Each
• 4 ohm Impedance

• 65 watts x 4 channel @ 4 ohm
• 90 watts x 4 channel @ 2 ohm
• Bridged: 180 watts x 2 channel @ 4 ohm
• Total RMS Power: 360 watts
• Class A/B 2 ohm Stable 4-Channel Amplifier

• For use with aftermarket sound systems or accessories like wenches
• Industrial-strength quadruple fuse holder
• Stainless steel hardware
• Also works in marine applications

• Swivel mount clamp fixture for ETXv3 tower speakers
• Connects with swivel mount clamps (clamps not included)
• Designed for 2006-up OEM MasterCraft Tower
• Sold as pair (2 swivel mount clamp fixture)

• Peak Power: 2000 watts
• RMS Power: 1000 watts
• Impedance: Dual 2 ohm
• Competition Grade Paper Cone
• Treated Foam Surround
• Mount depth: 6"
• Sensitivity: 81.0 dB

• Peak Power: 1000 watts
• RMS Power: 500 watts
• Impedance: Dual 4 ohm
• Paper cone
• Foam surround
• Sensitivity: 87.4 dB

• 1/0 Gauge 6000 Series Power Amplifier Wiring Kit
• Designed Specifically for Car Audio Systems up to 4000 Watts
• HyperTwist Wire Construction
• TruSpec Cables/Wires
• Pre-Terminated Power Connections
• Made From 100% Oxygen-Free Copper

• Spade Terminals
• 4 Gauge
• 1 Red & 1 Black
• Nickel Plated
• Resealable Polybag

• Posi-Lock Mini Butt Connectors
• Locking Twists Prevent Disconnection
• 20-26 AWG
• Package of 8

• Quick Disconnect
• Up to 4 Gauge Power Wire
• Polarity Identification for Safety

• 12-volt Sodium Car Audio Power Cell
• Sealed SIB (Sodium Ion Battery) design
• Perfect for 2000 - 2500 watts car audio stereo systems
• 4000 Cell Life Cycles at 80% DOD
• Ultra lightweight at only 4.10 lbs.

• Complete 1/0 Gauge Amplifier Installation Kit
• For Amplifiers Up To 4000 Watts RMS
• 100% (OFC) Oxygen Free Copper
• Dual Twisted Pair 2-Channel RCA Cable
• Tinned conductors for corrosion resistance
• Pre-terminated seamless power and ground ring terminals
• ANL/Mini-ANL Fuse Holder with 300 amp fuse
• CEA-2015 and BC5W2 Compliant

• 36" RGBW LED wire extension
• Male micro-DIN 5-pin and female micro-DIN 5-pin connectors
• Designed for use with Metra RGBW-CB2 (Sold separately)

• 4-Pin Waterproof RGB Accent Light Extension Cable
• Additional extension to the accent pods with 10" cables
• Designed for use with RGBW-CB1 controller (Sold separately)
• Cable Length: 10 ft / 120 inches

• 12" Amplified Loaded Subwoofer System
• 1000 watts RMS
• Includes one MTX Audio TN500.1 amplifier
• Variable bass boost
• Mono preamp output
• EBC wired bass level remote control

• Solid Brass allows for maximum power transfer
• 8 Gauge opening
• Crimp-on style
• Ideal for many car audio applications

New - Motorized WHITE 50Watt LED Spot Light with Remote Swivel Functionality

• 1-Way Remote
•Blue LED Light
• 1/4 Mile Range
• Waterproof Design

• 12-volt to 5-volt Step-Down Interface
• Fixes audible 'pop' when aftermarket stereo turns on factory amplifier
• Designed for use in Ford, Lincoln, and Mercury vehicles

• Marine stereo AM/FM antenna with flexible mast
• Includes 180° swivel base and 54" antenna cable
• Made with durable steel and corrosion-resistant rubber cover

• 20 feet 4 gauge Power and Ground Wire
• Silver-tinned OFC (100% Oxygen-Free Copper) material
• Color: White

• Complete Port Tube Kit
• 2" x 11" Port
• Achieve Greater Sound Pressure Levels with Less Distortion
• High Quality ABS Construction
• Mounting Hole Variations
• Designed in the U.S.A.

• 50 Watts x 4 + 200 Watts x 1 @ 4 ohm
• 100 Watts x 4 + 350 Watts x 1 @ 2 ohm
• 200 Watts x 2 + N/A @ 4 ohm Bridged/Mono
• 5-Channel Amplifer
• Element Ready™ design protects against outdoor exposure
• Top Mounted Control Panel

• 1/2 inch
• polyoefin
• 4 feet

• Peak Power: 500 watts
• Built-in D amplifier
• Weatherproof IPX-66 rating enclosure
• (4) 2-1/4" Mid-range front speakers
• (2) 2-1/4" Mid-range rear speakers
• (2) 1" tweeters
• (2) 4" side-mounted woofers
• AUX input for smartphones and MP3
• Dimensions: 27-3/8" W x 5-5/8" H x 6-1/2" D

• Metra Bass Blocker
• Non-Polar 10% Capacitor
• 4 Ohm: 400Hz
• 8 Ohm: 200Hz
• 100 Volts
• 99 uf
• White Heat Shrinked Capacitor
• Yellow Color Coded Silver Wire

• Active line output converter
• All-analog circuit design
• Adaptable to most OEM amplifier outputs
• Input load switching
• Automatic turn-on function

• 4" VEGA or HED Speaker Mesh Grille
• Designed for VEGA or HED series speakers
• Metal mesh grilles with embossed logo
• Sold per pair / two grilles

• 10,000W Peak
• 5,000W RMS
• Poly-ether Wide Edge Surround
• Triangular Lattice Design
• Spider Ring Design for Increased Linear Spider Position
• PSP Terminal for Easy and Quick Wiring
• Aluminum Bobbin Voice Coil

• See-through windows allow for easy inspection
• High-temperature, impact-resistant plastic casings
• Ultimate circuit protection
• High conductivity plating
• Maximum current transfer

• Low-Profile Machined Fixtures
• Mounts VeX Pods to Roll Cage
• Pipe diameter fitment: 1.375"
• Color: Black

• 10" Single Truck Sealed Subwoofer Enclosure
• 3/4" Medium Density Fiberboard (MDF) construction
• Universal truck (wedge) enclosure design
• Miter and Dado construction
• Premium carpet finish
• Silver spring loaded terminal cups
• Glued and braced with fasteners
• Total box volume: 0.62 cubic feet

• 500 FT/152.4 m Roll
• 16 Gauge
• Matte Blue wire
• Dual Conductor

• Peak Power: 1050 watts
• RMS Power: 350 watts
• Impedance: Dual 2 or 4 ohm
• Aluminum Cone
• Hi-Roll Rubber Surround
• Mount depth: 3-1/4"
• Sensitivity: 81 dB

• Master ANL Fuse Holder
• Maximum Input Gauge Size: 1/0 AWG
• Maximum Ouput Gauge Size: 1/0 AWG
• Total Number of Inputs: 1
• Total Number of Outputs: 1
• Brass material with marine stannum plating

• Works with Mini ANL (MANL) or AFS Fuses
• Accepts 4 or 8 Gauge Wire
• All Brass Construction
• Polycarbonate Base and Cover

• Sealed enclosure with 2 12" Terminator Series Subwoofer
• 200 watts RMS each
• Final Impedance: 2-ohm
• Dimensions: 29.63" L x 14" H x 13.5" W

• USB RTA Microphone for measuring AFC
• Highly sensitive measuring microphone for home theater, car audio and acoustic systems
• Measures the frequency response, phase response and delays
• Designed for use with SPL-Lab Measuring Center software for Windows and Android

• Ultrasonic Sensor for Security Systems
• Detects air pressure changes in the cabin of the vehicle
• Detect thieves entering vehicle without glass breakage
• Adds extra protection when used in conjunction with other security systems

• 1200 watts x 1 channel @ 4 ohm
• 1200 watts x 1 channel @ 2 ohm
• Total RMS Power: 1200 watts
• Class D 1.5 ohm Stable Monoblock Amplifier

• Universal Antenna Extender • Extends Antenna 204" (17 ft.)