Universal-Fit Audio for 2013 Can-Am Commander E

---

• 50 watts x 4 channel + 300 watts x 1 channel @ 4 ohm
• 75 watts x 4 channel + 500 watts x 1 channel @ 2 ohm
• Bridged: 150 watts x 2 channel @ 4 ohm + 500 watts x 1 channel @ 2 ohm
• Total RMS Power: 800 watts
• Class D 2 ohm Stable 5-Channel Amplifier

• 75 watts x 4 channel @ 4 ohm
• 100 watts x 4 channel @ 2 ohm
• Bridged: 400 watts x 1 channel @ 4 ohm
• Total RMS Power: 800 watts
• Class D 2 ohm Stable 6-Channel Amplifier

• Rear-View Monitor and Backup Camera Set
• 7" TFT-LCD monitor display panel
• Bar-type license plate camera with wide angle view
• Selectable parking guide lines

• 6 ft (1.83 m) Marine Audio 4-channel Interconnect Cable
• Molded Connectors
• 100% Oxygen-Free Copper
• Nickel-Plated, Brass Contacts

• 10" Subwoofer Mesh Grille Insert for W6v2 and W6v3 Subwoofers
• Powder-coated steel mesh grille in satin black finish
• Protects subwoofers against potential damage

• 1 input for 6 output video signal splitter
• Hard aluminum body to protect the device
• Filters out incoming noises
• Small and compact size

• 1/0 Gauge 6000 Series Power Amplifier Wiring Kit
• Designed Specifically for Car Audio Systems up to 4000 Watts
• HyperTwist Wire Construction
• TruSpec Cables/Wires
• Pre-Terminated Power Connections
• Made From 100% Oxygen-Free Copper

• 200 watts x 2 channel @ 4 ohm
• 300 watts x 2 channel @ 2 ohm
• Bridged: 600 watts x 1 channel @ 4 ohm
• Total RMS Power: 600 watts
• Class D 2 ohm Stable 2-Channel Amplifier

• Mounting clamp for Stealth soundbars with 1.5" round tubing
• Allows soundbar mounting to the roll cage or tower tubing
• CNC'd from billet aluminum for extra durability
• Includes mounting hardware

• 3.5mm to RCA
•Twisted Pair Interconnect
• 3 FT Long

• (2) 1/0 AWG - 10 AWG plus (2) 4 AWG - 10 AWG Out
• Compact design for simpler installation
• Solid brass construction for maximum conductivity
• Nickel finish for durability

• Life Expectancy: 50,000 hours
• 12-Watts
• IP67 rating
• Cool White (Color Temperature)
• Beam Pattern: Linear

• 240 watts x 2 channel @ 4 ohm
• 350 watts x 2 channel @ 2 ohm
• Bridged: 700 watts x 1 channel @ 4 ohm
• Total RMS Power: 700 watts
• Class D 2 ohm Stable 2-Channel-Channel Amplifier

• 12" Dual Sealed Subwoofer Enclosure
• 3/4" Medium Density Fiberboard (MDF) construction
• Internal box volume: 2.00 cubic feet
• Premium Black Carpet with Black NVX Logo

• 1" Hole Plug
• Mounts flush
• Color: Black
• 100 per package

• RMS: 300W x 1 @ 4 ohm, 500W x 1 @ 2 ohm, 500W x 1 @ 1 ohm
• Dynamic Power Output: 690W
• CEA-2006 Compliant
• Variable Bass Boost: 0 to +18 dB at 45 Hz
• Ultra Efficient Class bD Circuitry
• Dimensions: 11-7/16"L x 8-3/16"W x 2-3/16"H

• Accepts up to 8-Gauge
• Power, Ground and Remote Quick Disconnect
• Can be used for Subwoofer Quick Disconnect

• 1-Way Remote Car Starter
• Includes (2) 1-way LED transmitters
• 1/4 mile (1320 feet) range
• Internal antenna
• Active transmit LED
• Command buttons

• 1-Way 5-Button Replacement LED Remote
• Up to 1500 feet of range (0.28 miles)
• Replacement remote for SP-402

• Dual USB water resistant knockout panel
• Mounts in dash
• Includes protective cover
• Uses a 1-1/8 inch mounting hole

• Smart Key Module Interface
• For Audi A8, Porsche Cayenne Volkswagon Touareg Models Equipped With the Smart Key Ignition System
• Ready to Install Right Out of the Box
• No Programming Required
• Factory Alarm Disarm

• Pair of empty single 1" tweeter pods
• Designed for C3 or C7 Tweeters (not included)
• Hard coated with a black anodized finish
• Easy mounting on almost any flat surface

• 12 Volt 30/40 Amp Economy Relay
• Voltage Power: 12 volts
• Ampere Power: 30 and 40 amps
• Vehicle Application: Universal
• Color: Black

• Ported enclosure with 1 12" W6 v3 Series Subwoofer
• 600 watts RMS
• Final Impedance: 2-ohm
• Dimensions: 14.5" L x 16" H x 24" W

• 80-Amp continuous / 150-Amp surge
• Ideal for car stereo systems and mobile electronics
• Prevents the main starter battery from draining
• 10V to 16.5V DC operating range

• 12" Amplified Loaded Subwoofer System
• 230 watts RMS
• Built-In Class D Amplifier
• Variable Bass Boost
• Speaker-Level Inputs
• Wired Remote Bass Level Control

• 12" Amplified Loaded Subwoofer System
• 500 watts RMS
• Built-In Class D Amplifier
• Variable Bass Boost
• Wired Remote Bass Level Control

• Water-Resistant Master MAXI Fuse Block
• 4 AWG to 8 AWG Power Wire
• Used In Under-Hood Applications For Amp Installation

• 10" LED acrylic ring and LED strip for Wet Sounds marine speakers
• CNC-machined high-quality acrylic rings
• SMD 5050 RGB LED strips
• Compatible with Wet Sounds REV10 and REV410 marine tower speakers (Sold separately)

• Swivel Mount Fixture
• For PS650-VeX models
• Designed to mount two VeX Pods
• Patented and American-made by Axia Alloys
• Inner diameter of 1.750"

• 6.5" Quad Ported Subwoofer Enclosure
• 3/4" Medium Density Fiberboard (MDF) construction
• Total box volume: 2.50 cubic feet
• High-output XXL enclosure with double flush baffle

• Pair of 2-Way Universal Pod for 6.5" loudspeaker and 1.5" tweeter
• Enclosure comes in 1 set (left and right)
• Injected high density ABS plastic construction
• UV protected and all-element ready

• 7.7" trim ring for sport grilles in M6 speakers
• M6 speakers sold separately
• Color: Warm White

• Speaker Line High Level Input To Female RCA Output Adapter
• Converts Factory (OEM) High Level Speaker Outputs into RCA Outputs for Use with an Aftermarket Amp

• Metra Bass Blocker
• Non-Polar 10% Capacitor
• 4 Ohm: 400Hz
• 8 Ohm: 200Hz
• 100 Volts
• 99 uf
• White Heat Shrinked Capacitor
• Yellow Color Coded Silver Wire

• 10" Dual Ported Subwoofer Enclosure
• 3/4" Medium Density Fiberboard (MDF) construction
• Internal box volume: 2.90 cubic feet
• Premium Black Carpet with Black NVX Logo

• 6.5" Pro-Audio Horn Tweeter and 2.03" Compression Driver
• 640 watts Peak Each
• 320 watts RMS Each
• 8 ohm Impedance

• Peak Power: 1200 watts
• RMS Power: 600 watts
• Impedance: Dual 2 ohm
• Pressed Paper cone
• Pressed Foam surround
• Mount depth: 4.45"
• Sensitivity: 87.5 dB

• Complete 1/0 Gauge Amplifier Installation Kit
• For Amplifiers Up To 4000 Watts RMS
• 100% (OFC) Oxygen Free Copper
• Dual Twisted Pair 2-Channel RCA Cable
• Tinned conductors for corrosion resistance
• Pre-terminated seamless power and ground ring terminals
• ANL/Mini-ANL Fuse Holder with 300 amp fuse
• CEA-2015 and BC5W2 Compliant

• 10-pack 8-gauge Heat Shrink
• Protect your cable crimp ends with style
• Color: Black