Universal-Fit Audio for 2015 Audi A7 Quattro

---

• Dual Side View Blind Spot Camera Kit
• Compatible with 2007-2018 Jeep Wrangler JK (2-Door and 4-Door models)
• Mounting Style: Bracket Mount
• Viewing Angle: 80 degrees
• Resolution: 648 x 488 (CVBS) / 1280 x 720 (AHD)
• Waterproof: IP67
• Nightvision: Low-light at 0.1 lux

• 125A MANL Fuse (4 Pack)
• Nickel Plated for Better Power Transfer
• Resealable Polybag
• Heavy Duty Construction

• 6.5" Pro-Audio Horn Tweeter and 2.03" Compression Driver
• 640 watts Peak Each
• 320 watts RMS Each
• 8 ohm Impedance

• 200 Amp V12 Series 24K Gold-Plated Circuit Breaker
• Manual Reset Button
• 1/0 or 4 Gauge In/Out
• Water Resistant Housing
• 24K Gold-plated

• 500 FT/152.4 m Roll
• 16 Gauge
• Matte Blue wire
• Dual Conductor

• Single Amplifier 4 Gauge Power Installation Kit
• 800 Watts Max
• True to Gauge Power and Ground Cable
• Pure OFC Copper
• Fine-Strand Construction
• 80 Amp MAXI Fuse with Fuseholder

• RMS Power: 1000 - 2000 watts
• Impedance: Dual 2 ohm
• Double-pressed pulp Cone
• UV-resistant Santoprene Surround
• Mount depth: 13-3/16"

• 12-volt Sodium Car Audio Power Cell
• Sealed SIB (Sodium Ion Battery) design
• Perfect for 2000 - 2500 watts car audio stereo systems
• 4000 Cell Life Cycles at 80% DOD
• Ultra lightweight at only 4.10 lbs.

• 0.75" Replacement Diaphragm for MO75T2 Tweeter
• Specifically designed for MO75T2 (MO75TRK)
• Direct-fit design allows hassle-free installation
• Impedance: 2-ohm

• Shielded noise-rejecting Twisted-pair construction
• Heavy gauge OFC conductors ensure superior sound quality
• Split-tip Silver-Plated ends offer best in class signal transfer
• Molded ends equipped with colored channel identifiers

• Shielded noise-rejecting double Twisted-pair construction
• Heavy gauge OFC conductors ensure superior sound quality
• Split-tip Silver-Plated ends offer best in class signal transfer
• Precision Machined “Locking” ends with colored channel identifiers
• Black nylon protective jacket minimizes friction and electromagnetic interference

• IPX6 and IPX7 water rating
• Built-in ANT technology
• Easy-to-use buttons and LED lighting
• Available in Black

• RMS Power: 300 watts
• Impedance: Single 4 ohm
• Polypropylene Cone
• Foam Surround
• Mount depth: 5.40"
• Sensitivity: 85.64 dB

• 2.0 Farad Power Capacitor
• Perfect for Systems up to 2000 Watts
• Audible Warning
• Red Voltage Display
• Mounting Brackets Included

• 1/0-AWG / 4-AWG inputs
• Platinum plated
• Low-resistance, high-current ability
• Set screw style connection - no need for ring terminals

• Peak Power: 2400 watts
• RMS Power: 800 watts
• Impedance: Dual 2 or 4 ohm
• Composite Paper Concave Cone
• Nitrile Butadiene Rubber NBR Surround
• Mount depth: 6.75"
• Sensitivity: 87.6 dB

• Peak Power: 1000 watts
• RMS Power: 350 watts
• Impedance: Dual 4 ohm
• Kevlar Reinforced Pulp Paper Cone
• High-Amplitude Multi-Roll (HAMR) Surround
• Mount depth: 4.56"
• Sensitivity: 83.7 dB

• Cable Length: 5 Ft. (1.5m)
• Voltage: 10-16V DC
• Draw: 20mA
• Compatible With Bluetooth A2DP V3.0
• Operating Range: 33 ft.
• Waterproof Rating: IP65
• Dimensions: 2-5/16"W x 1-11/16"D x 9/16"H

• 75 watts x 4 channel @ 4 ohm
• 100 watts x 4 channel @ 2 ohm
• Bridged: 400 watts x 1 channel @ 4 ohm
• Total RMS Power: 800 watts
• Class D 2 ohm Stable 6-Channel Amplifier

• See 2-3 times further than stock lighting systems
• Increase stopping distance by 200%
• LED technology provides instant on/off light with no ramp-up time
• Fanless heat-sink technology

• Peak Power: 4000 watts
• RMS Power: 2000 watts
• Impedance: Dual 2 ohm
• Polypropylene Cone
• High Roll Foam Surround
• Mount depth: 10.88"
• Sensitivity: 80.6 dB

• Retractable Top Mount Retractable Antenna
• 31" 4-Section Retractable Mast

• Shielded noise-rejecting Twisted-pair construction
• Heavy gauge OFC conductors ensure superior sound quality
• Split-tip Silver-Plated ends offer best in class signal transfer
• Molded ends equipped with colored channel identifiers

• Mesh grille for select NVX 12" subwoofers
• Does not work with NVX VC-series V3 subs
• Designed to fit NVX VC-series V1 and V2 subwoofers
• Pre-drilled bolt pattern

• All-Weather Bluetooth Receiver and Controller
• Bluetooth 5.1 support
• IPX6 water-resistant rating
• AptX HD support for 24 Bit / 48 kHz audio streaming
• Three-zone controller with LED illumination

• 1" titanium replacement diaphragm for NVX VPRO35TW tweeters
• Restores clear, high-frequency sound
• Replaces damaged or worn components
• Quick and easy installation

• Dual 1/0-gauge input and output to 1/0-gauge wire reducer
• Machined brass construction with Chrome finish
• Designed for aftermarket audio upgrades in any vehicle

• Spade Terminals
• 10 Gauge • 1 Red & 1 Black
• Nickel Plated
• Resealable Polybag

• High Density Universal A Pillar Pod for 2.5" Tweeters
• Durable high-density and durable plastic construction
• Enclosure houses 2 2.5" dome tweeters
• UV protected and all elements ready

• Marine Y-Adaptor Cable
• Compatible extension cable for PMX-1R and PMX-0R

• RMS Power: 1000 - 2000 watts
• Impedance: Dual 1 ohm
• Double-pressed pulp Cone
• UV-resistant Santoprene Surround
• Mount depth: 13-3/16"

• Easy-to-use bus/bar distribution block
• 6 Ring Terminal Connections
• Use when installing multiple amps
• 3/4" PVC body
• 1/4" aluminum bus bar
• 3/16" Clear acrylic cover
• Use as a grounding block or positive distribution

• Master ANL Fuse Holder
• Maximum Input Gauge Size: 1/0 AWG
• Maximum Ouput Gauge Size: 1/0 AWG
• Total Number of Inputs: 1
• Total Number of Outputs: 1
• Brass material with marine stannum plating

• Heavy duty terminals for serious applications
• Lightweight 3/4" PVC
• Won't break or leak under high pressure
• 5/16" Bolt Terminal
• All Stainless Hardware
• Two Channel

• 12" Amplified Loaded Spare Tire Subwoofer System
• 150 watts RMS
• Includes Class D Amplifier
• Compact and shallow design
• Variable Bass Boost
• Speaker-Level Inputs
• Wired Remote Bass Level Control

• 6-Channel Line Out Converter
• AccuBASS processing for correction of bass roll-off
• AudioControl ACR-1 REMOTE wired bass remote knob included

• Non-digital 150 farads capacitor
• Made for systems up to 1200 watts
• Includes mounting hardware for a secure installation

• Controls Select Kenwood Marine Receivers
• LCD 2-Line Display
• Includes Anodized Aluminum Mounting Hardware

• See-through windows allow for easy inspection
• High-temperature, impact-resistant plastic casings
• Ultimate circuit protection
• High conductivity plating
• Maximum current transfer

• 6 ft (1.83 m) Marine Audio 4-channel Interconnect Cable
• Molded Connectors
• 100% Oxygen-Free Copper
• Nickel-Plated, Brass Contacts