Amplifiers for Powering a Sub for 2015 Volkswagen Jetta

---

• RMS: 300W x 1 @ 4 ohm, 500W x 1 @ 2 ohm
• Total RMS Power: 500W
• CEA-2006 Compliant
• Remote PLC (Punch Level Control) Included
• Efficient Class-D circuit topology
• 4 Gauge Power Amplifier Installation Kit
• Ideal for Systems Up to 650 Watts
• Premium Power and Ground Wire Provides Optimal Power Transfer
• 2-Channel Twisted RCA Cables

• R500X1D 500W RMS Prime Series Class D Monoblock Amplifier
• BAK42 Complete 4 Gauge Amplifier Wiring Kit with 2-Channel RCA Interconnects (CCA Wiring)

• 150 Watts RMS x 1 @ 4 ohm
• 300 Watts RMS x 1 @ 2 ohm
• Total Peak Power: 600 Watts
• Preamp RCA outputs to daisy chain multiple amps
• Variable Low-Pass Crossover: 50 - 200Hz 12dB/octave
• Variable Bass Boost: 0 to +12 dB bass boost at 40 Hz
• Includes Amplifier Wiring Kit

• 400 Watts RMS x 1 @ 4 ohm
• 800 Watts RMS x 1 @ 2 ohm
• 1200 Watts RMS x 1 @ 1 ohm
• CEA-2006 Compliant
• R.L.C. Remote Level Control
• Includes Amplifier Wiring Kit

• 1200 Watts RMS x 1 @ 2 ohm
• Total Peak Power: 2400 Watts
• Preamp RCA outputs to daisy chain multiple amps
• Variable Low-Pass Crossover: 50 - 200Hz 12dB/octave
• Variable Bass Boost: 0 to +12 dB bass boost at 40 Hz
• Dimensions: 7-3/16"W x 8-1/8"L x 2-3/8"H • Includes Amplifier Wiring Kit

• RMS: 300W x 1 @ 4 ohm, 500W x 1 @ 2 ohm
• Total RMS Power: 500W
• CEA-2006 Compliant
• Remote PLC (Punch Level Control) Included
• Efficient Class-D circuit topology
• Dimensions: 8-1/2"L x 6-3/4"W x 2"H

• 750 watts x 1 channel @ 4 ohm
• 1500 watts x 1 channel @ 2 ohm
• Total Peak Power: 1500 watts
• Class A/B 2 ohm Stable Monoblock
• Includes Amplifier Wiring Kit

• Variable Electronic Crossover
• Bass Remote Included
• Subsonic Filter
• Switchable Bass Boost

• R500X1D 500W RMS Prime Series Class D Monoblock Amplifier
• BAK42 Complete 4 Gauge Amplifier Wiring Kit with 2-Channel RCA Interconnects (CCA Wiring)

• 300 Watts RMS x 1 @ 4 ohm
• 600 Watts RMS x 1 @ 2 ohm
• 800 Watts RMS x 1 @ 1 ohm
• Efficient Class-D Monoblock Amplifier
• KickEQ™ 6dB variable bass boost for those additional low frequencies
• Includes Amplifier Wiring Kit

• Class D Amp Technology
• 4 Ohm: 350 Watts RMS x 1
• Compact Size
• Turn-On Mode Switch
• Input Level Control

• RMS: 700W x 1 @ 4 ohm, 1000W x 1 @ 2 ohm, 1000W x 1 @ 1 ohm
• Total RMS Power: 1000W
• CEA-2006 Compliant
• Variable Bass Boost: 0 to +18 dB at 45 Hz
• Ultra Efficient Class bD Circuitry
• Dimensions: 13-11/16"L x 8-3/16"W x 2-3/16"H
• Includes NVX XKIT42 4 Gauge Amp Wiring Kit

• RMS: 300W x 1 @ 4 ohm, 500W x 1 @ 2 ohm, 500W x 1 @ 1 ohm
• Dynamic Power Output: 690W
• CEA-2006 Compliant
• Variable Bass Boost: 0 to +18 dB at 45 Hz
• Ultra Efficient Class bD Circuitry
• Dimensions: 11-7/16"L x 8-3/16"W x 2-3/16"H

• 500 watts x 1 channel @ 4 ohm
• 1000 watts x 1 channel @ 2 ohm
• 1500 watts x 1 channel @ 1 ohm
• Total RMS Power: 1500 watts
• Class D 1 ohm Stable Monoblock Amplifier

• 300 Watts RMS x 1 @ 4 ohm
• 500 Watts RMS x 1 @ 2 ohm
• CEA-2006 Compliant
• Top Mounted Control Panel
• Class-D Amplifier
• Includes Amplifier Wiring Kit

• 500 watts x 1 channel @ 4 ohm
• 1000 watts x 1 channel @ 2 ohm
• 2000 watts x 1 channel @ 1 ohm
• Total RMS Power: 2000 watts
• Class D Stable Monoblock Amplifier
• Includes Amplifier Wiring Kit

• 550 watts x 1 channel @ 4 ohm
• 950 watts x 1 channel @ 2 ohm
• 1,500 watts x 1 channel @ 1 ohm
• Total RMS Power: 1,500 watts
• Class D 1 ohm Stable Monoblock Amplifier
• Includes Amplifier Wiring Kit

• 4 ohm: 325 Watts x 1 chan. / 2 ohm: 600 Watts x 1 chan. / 1 ohm: 1200 Watts x 1 chan.
• Total power output: 1200 Watts
• Pulse Width Modulated MOSFET power supply
• Accu-Cross crossovers allow for complete control of the signal directing to all speakers
• The Ultra-Fi™ MOSFET is designed for music production vs just electronics output power. It produces very musical high power with high efficiency for cooling and minimal distortion
• Frequency Response: 10 - 250 Hz
• Includes Amplifier Wiring Kit

• Adjustable bass boost for customizable sound preferences
• Class D Stable Monoblock Amplifier
• Includes Amplifier Wiring Kit

• CVP Series Monoblock Amplifier
• 200W RMS X 1 @ 2Ω / 120W RMS X 1 @ 4Ω
• 1-Ohm Stable Class D Monoblock Operation
• Direct Short, Thermal, & Overload Circuits Protect Amplifier
• 200mV-6V High Level or Low Level RCA Input
• Includes Amplifier Wiring Kit