


























400W RMS CX-Series Class-D Monoblock Amplifier
• 150 Watts RMS x 1 @ 4 ohm
• 300 Watts RMS x 1 @ 2 ohm
• Total Peak Power: 600 Watts
• Preamp RCA outputs to daisy chain multiple amps
• Variable Low-Pass Crossover: 50 - 200Hz 12dB/octave
• Variable Bass Boost: 0 to +12 dB bass boost at 40 Hz
• Includes Amplifier Wiring Kit
The CX Series spans all kinds of systems, whether you're just trying to get a little more out of your factory radio or you're ready to blow the doors off with a completely aftermarket setup. Either way, the quality of your sound is at the heart of the CX Series. Sleek, simple styling and installation flexibility all round out the amplifiers' functionality.
Kicker makes your installation simple, but gives you plenty of options. Make it easy on yourself when plugging in with Kicker's KISL so you can take high-level signal from the headunit's speaker outputs straight into the amp's RCA input. Also, most models are just more than two inches thick and included brackets allow you to install these vertically. If space is at a premium in your ride, the CX series gives off plenty of power while saving you some room.
The CXA300.1 puts the thunder in your bass. This Class-D 2-ohm stable single channel amp is built to handle 300 watts at 2 ohms for 1 channel, or 150 watts at 4 ohms.
Like most of the amps in the CX series, it's easy to control your bass output from the driver's seat. Pick up a Kicker CXARC wired remote bass level control, plug it in, and optimize your sound easily.
The CX Series has a lot of built-in technology to make sure your system just keeps going for the long haul. With litz-wound transformers to maximize power transfer while minimizing power loss, high current switching, buffered RCA outputs, these amps are built to put out lasting, quality power.
These amps also include their own crossovers and an adjustable KickEQ Bass Boost. A 3-second turn-on delay helps eliminate any additional interference that might affect your system.
But these amps also have Kicker's Failsafe Integration Technology inside. That means they can take signal from any audio source and run it straight into the amp. For you, it means no need for line-out converters, step down modules, processors or less conventional wiring to complete your system. Kicker's FIT eliminated the need for additional equipment that could introduce additional noise to your signal. It even works well with factory amplified systems from other premium brands.
For a potent, versatile power solution for your sound system, pick up as many CX Series amps as you need here at Sonic Electronix. Add one, or however many you need, to your cart today.
Belva BAK82BL
8 Gauge Premium (CCA) Copper Clad Aluminum Complete 2-Channel Amplifier Wiring Kit with RCA for Amplifiers up to 600 Watts - BLUE
Quantity: 1
Manufacturer:
Model Number:
BAK42,46CXA4001T
Weight:
7.60lbs
Internal SKU:
43cxa3001_bak42
Internal Product ID:
174217
Pretty Good for the Price
Overall, the amp is super solid and seems to be built rather well. Having a rated power certificate in the box was also helpful to see that it actually is putting out the claimed RMS power or above. Currently using it to power a single CompR 12" and it hits hard with the gain barely over 1/3 and no bass boost. Only complaint is that the power and ground inputs are not designed for bare wire, you'll need to buy a U or spade connector to reliably attach your power and ground.
70
found this helpful.Cheap kit that did it's job
Inexpensive kit that works great for the 300 watt amp I'm running.
70
found this helpful.Great value
Worked great for the system I installed. It came with everything to complete the project. Sonic has great service and fast shipping.
67
found this helpful.Belva BAK82BL (Blue) Review
Overall this was a pretty good kit for the money. The one downside was I was missing the following and had to go out and buy these to finish my install.
One black rubber firewall grommet
One 8 Gauge Blue chrome plated ring terminals
One 8 Gauge Black chrome plated ring terminal
Three 18 Gauge Blue Spade terminal
Two 18 Gauge Black Spade terminal
One 18 Gauge Red butt connector
Ten 4" Black zip ties
66
found this helpful.No complaints
Good amp kit for the price. Not sure if it is true 8 gauge but at this price can't complain. Plus it is everything you need
64
found this helpful.Not worth it.
This wiring kit isn't worth your money. Just buy a decent one for $50 than wasting your time with this piece of crap.
67
found this helpful.Great deal
Worked great for a 240 watt amp powering 4 6x9's in a custom built enclosure
64
found this helpful.AMP. KIT
VERY GOOD QUILTY PRODUCT AND HAD ENOUGH WIRE FOR PROJECT
63
found this helpful.Nice cabling
Product performs as advertised. Came with most of necessary hardware
61
found this helpful.Just what I was looking for!
I purchased this to go in the trunk of my 1966 mustang. I purchased it after reading another review of an install in a mustang. It fit perfectly in the side of the trunk and did not take up a lot Space. Sounds great.
57
found this helpful.