Universal-Fit Audio for 2017 Buick Encore

---

• Shielded noise-rejecting Twisted-pair construction
• Heavy gauge OFC conductors ensure superior sound quality
• Split-tip Silver-Plated ends offer best in class signal transfer
• Molded ends equipped with colored channel identifiers

• 50 watts x 8 channel + 80 watts x 4 channel @ 4 ohm
• Total RMS Power: 720 watts
• Class D 4 ohm Stable 12-Channel Digital Sound Processor Amplifier
• High-resolution (Hi-Res) audio playback
• Selectable pre-configured sound system configurations
• Embedded RTA signals for customized sound tuning
• Bluetooth audio streaming with included external module

• 15 Band Parametric EQ
• 8-Channel RCA Outputs
• Provides up to 2 Volts of output
• Fully adjustable High and Low-pass filters
• Time alignment in 0.02 ms increments

• Controls Select Kenwood Marine Receivers
• LCD 2-Line Display
• Includes Anodized Aluminum Mounting Hardware

• 12-volt Absorbent Glass Mat (AGM) Battery
• Sealed Absorbent Glass Mat (AGM) design
• Perfect for 2500W car audio stereo systems
• Compatible with most vehicle applications

• Peak Power: 1200 watts
• RMS Power: 600 watts
• Impedance: Dual 4 ohm
• Enhanced Pressed Paper Cone
• High Roll Foam Surround
• Mount depth: 5.80"
• Sensitivity: 85 dB

• Wire Gauge Reducer
• 0 AWG to 4 AWG
• Nickel Plated
• Deep Wire Recesses
• Ultimate Power Delivery

• HPP plating for superior corrosion resistance
•Custom tooled solid brass
• Allows additional power or ground connections
• Contains One (1) Terminal Bolt

• Easy-to-use bus/bar distribution block
• 6 Ring Terminal Connections
• Use when installing multiple amps
• 3/4" PVC body
• 1/4" aluminum bus bar
• 3/16" Clear acrylic cover
• Use as a grounding block or positive distribution

• 3" Apocalypse Series Tweeters
• 70 watts Peak Each
• 35 watts RMS Each
• 4 ohm Impedance

• Multi GM Battery Terminal
• One 1/0 Gauge, One 4 Gauge and Two 8 Gauge Outputs
• For Use with GM Side Posts or Stinger Batteries
• High Power Connection
• Works on Both Positive and Negative Terminals

• Universal Marine Bluetooth Receiver
• Add-on controller for amplified soundbars and speaker systems
• Controls volume and tracking
• 3.5mm female connection for main output

• Low-Profile Machined Fixtures
• Mounts VeX Pods to Roll Cage
• Pipe diameter fitment: 2.875"
• Color: Black

• IPX6 and IPX7 water rating
• Built-in ANT technology
• Easy-to-use buttons and LED lighting
• Available in White

• 200 amp Battery Isolator and Relay
• Prevents primary battery discharge
• Maximum current transfer
• Extends battery life
• Universal 12V Applications

• 12" Single Ported Subwoofer Enclosure
• 3/4" Medium Density Fiberboard (MDF) construction
• Total box volume: 2.5 cubic feet
• High-output XXL enclosure with double flush baffle

• 10" Dual Sealed Subwoofer Enclosure
• 3/4" Medium Density Fiberboard (MDF) construction
• Internal box volume: 1.20 cubic feet
• Premium Black Carpet with Black NVX Logo

• 12" Protective Subwoofer Grille
• Perfect for Use with NVX E-, N-, Vs-, SM-Series Subwoofers (ESW124, NSW122v3, NSW124v3, VSW122v3, VSW124v3, SMW12D4)
• Works with Most Other 12" Subwoofers
• High Quality Construction

• 12-volt to 6-volt step down converter
• Provides proper voltage for a 6V factory backup
• Includes a wiring harness with three wires

• HPP plating for superior corrosion resistance
•Custom tooled solid brass
• Allows additional power or ground connections
• Contains One (1) Terminal Bolt

• Universal Accessory Controller Module
• Designed to control external vehicle accessories
• Controls eight 12-volt accessories
• Pulsed, latched or momentary output configurations
• Connects to select Alpine stereos

• Peak Power: 1300 watts
• RMS Power: 650 watts
• Impedance: Dual 4 ohm
• Carbon Fiber Enhanced Non-Pressed Paper Cone
• Custom High Roll Foam Surround with black nylon stitching
• Mount depth: 5.31"
• Sensitivity: 83 dB (1W/1m)

• 300 watts x 1 channel @ 4 ohm
• 500 watts x 1 channel @ 2 ohm
• Total RMS Power: 500 watts
• Class D 2 ohm Stable Monoblock Amplifier

• Solid Brass allows for maximum power transfer
• 8 Gauge opening
• Crimp-on style
• Ideal for many car audio applications

• Male to male audio cable
• Fits all standard Mini 3.5 mm (1/8 in.) jacks
• Pure OFC Copper Conductors with Polyethylene Dielectrics
• Machined Brass Connector Elements

• Universal round terminal cup for speaker and subwoofer boxes
• Gold-plated contacts improve signal transfer
• Installation is a breeze
• Rear connections secure with nuts
• Thumbscrew binding posts secure the connection

• 50 watts x 2 channel @ 4 ohm
• 100 watts x 2 channel @ 2 ohm
• Bridged: 200 watts x 1 channel @ 4 ohm
• Total RMS Power: 200 watts
• Class D 2 ohm Stable 2-Channel Amplifier

• For use with aftermarket sound systems or accessories like wenches
• Industrial-strength quadruple fuse holder
• Stainless steel hardware
• Also works in marine applications

• Made with heavy-gauge steel
• Box is universal
• High quality at an affordable price
• Bottom of the boxes have predrilled flanges

• 8 Gauge Firewall Grommet
• IP68 Waterproof Rating
• Protects Cables When Installing Through a FIrewall
• Sold Individually

• 10" Single Truck Sealed Subwoofer Enclosure
• 3/4" Medium Density Fiberboard (MDF) construction
• Universal truck (wedge) enclosure design
• Miter and Dado construction
• Premium carpet finish
• Silver spring loaded terminal cups
• Glued and braced with fasteners
• Total box volume: 0.62 cubic feet

• USB/AUX input
• 6-foot cable
• front-mounted USB-A port and 3.5mm aux input
• 1" mounting hole required
•Easy screw in style installation

• PRO Series Power Distribution T-Block
• Three 1/0 Gauge Inputs/Outputs
• Daisy Chain Design
• Deep Wire Recesses
• Oversized Set Screws
• Corrosion Resistant ShocKrome-Plated
• Protective Cover Included

• 12-volt to 5-volt Step-Down Interface
• Fixes audible 'pop' when aftermarket stereo turns on factory amplifier
• Designed for use in Ford, Lincoln, and Mercury vehicles

• Low-Profile Machined Fixtures
• Mounts VeX Pods to Roll Cage
• Pipe diameter fitment: 3.250"
• Color: Black

• 0.75" diaphragm for tweeter
• Designed for Cerwin Vega P75T tweeter
• East to install, no cutting or drilling required
• Improves high‑frequency performance

• Complete Port Tube Kit
• 6" x 11" Port
• Achieve Greater Sound Pressure Levels with Less Distortion
• High Quality ABS Construction
• Mounting Hole Variations
• Designed in the U.S.A.

• Antenna Adapter for Vehicles with Two Antennas
• 1 Male to 2 Female

• High Current Transfer
• Stinger Select 200 Amp Circuit Breaker
• Manual Trip Reset
• High Current Protection

• Top mount adapters brackets for MasterCraft towers
• Works with ICON8X, REV8X, REV10X
• Also works with ICON8XM, REV8SXM, and REV10SXM via removable flat base mounts
• Includes (2) disc adapters and mounting screws

• Dual Knob Dual Surface Mount Housing Pod
• Mounting Option For use with: BAWPL, BA2USB, BAVTM
• Color: Black

• Ported enclosure with 2 12" Solo-Baric L7S Series Subwoofer
• 1500 watts RMS (3000 watts Peak)
• Final Impedance: 2-ohm
• Dimensions: 33-3/4" L x 16" H x 16-1/4" W x 19-1/2" W2

• Features Qualcomm Quick Charge 3.0 - Can replace your cigarette lighter socket or add as a new one
• Charges devices 4x faster than conventional charging
• Compatible with most 12/24V charging systems
• Can be used nearly any application (Car/Truck/SUV/ATV/UTV/RV/Motorcycle/Marine)
• Digital Volt Indicator display the status of your battery or your charging system

• 2-Channel 4000 Series RCA Interconnect Cable
• 1-1/2 ft. Cable Length
• Stinger Audiophile Grade
• Twisted Pair Construction
• Clear Protective Jacket
• Compact Connector Design
• Split-Tip Connector

• All-Weather Bluetooth Receiver and Controller
• Bluetooth 5.1 support
• IPX6 water-resistant rating
• AptX HD support for 24 Bit / 48 kHz audio streaming
• Three-zone controller with LED illumination

• Ported enclosure with 2 12" CompR Series Subwoofer
• 1000 watts RMS (2000 watts Peak)
• Final Impedance: 2-ohm
• Dimensions: 32-3/8" L x 16" H x 14" W x 17-1/4" W2

• Shielded noise-rejecting double Twisted-pair construction
• Heavy gauge OFC conductors ensure superior sound quality
• Split-tip Silver-Plated ends offer best in class signal transfer
• Precision Machined “Locking” ends with colored channel identifiers
• Black nylon protective jacket minimizes friction and electromagnetic interference

• 12" Single Sealed Subwoofer Enclosure
• 3/4" Medium Density Fiberboard (MDF) construction
• Internal box volume: 1.00 cubic feet
• Premium Black Carpet with Black NVX Logo

• Swivel Mount Fixture
• For the VeX™ Enclosed Systems
• use to mount on a roll cage
• Low-profile, machined mounting fixtures
• For pipe diameter of 2.375" (60.3 mm)
• Designed to mount two VeX™ Pods
• American-made by Axia Alloys

Universal Antenna Extender • Extends Antenna 18" (1.5 ft.)

• Positive or Negative Battery Terminal Clamp
• Connects to the positive or negative battery terminal
• Splits the connection to 3 outputs
• One 1/0 or 4 Gauge and two 4 or 8 Gauge outputs

• 75 watts x 4 channel @ 4 ohm
• 100 watts x 4 channel @ 2 ohm
• Bridged: 400 watts x 1 channel @ 4 ohm
• Total RMS Power: 800 watts
• Class D 2 ohm Stable 6-Channel Amplifier

• 65 watts x 4 channel @ 4 ohm
• 90 watts x 4 channel @ 2 ohm
• Bridged: 180 watts x 2 channel @ 4 ohm
• Total RMS Power: 360 watts
• Class A/B 2 ohm Stable 4-Channel Amplifier

• Voltage converter stabilizer
• Input voltage: DC 8 volts - 40 volts
• Output voltage: DC 12 volts
• Maximum output current: 2 amps

• Retractable Top Mount Retractable Antenna
• 31" 4-Section Retractable Mast

• Direct Connection to the factory harness
• Length: 5 feet
• Color coded wires for easy installation
• No cutting or splicing required

•Digital Optical Audio Connection Cable
• Digital Optical Audio Connection Cable
• Built-in Toslink Connectors
• Length: 3 feet

• Complete Port Tube Kit
• 2" x 11" Port
• Achieve Greater Sound Pressure Levels with Less Distortion
• High Quality ABS Construction
• Mounting Hole Variations
• Designed in the U.S.A.