Universal-Fit Audio for 2019 Genesis G80

---

• Swivel mount clamp for ETXv3 tower speakers
• Designed to fit tower speakers or roll bars
• Sold as pair (2 swivel mount clamps)
• Inner clamp diameter: 2" (50.8mm)

• Extension Cable
• Length: 50 feet

• Front and rear parking sensors with waterproof connectors
• Audible buzzer with volume adjustment
• Total Number of Sensors: 8
• Detection Distance: 1 feet to 5.9 feet

• 500 FT/152.4 m Roll
• 16 Gauge
• Matte Blue wire
• Dual Conductor

• Peak Power: 4000 watts
• RMS Power: 2000 watts
• Impedance: Dual 1 ohm
• Polypropylene Cone
• High Roll Foam Surround
• Mount depth: 10.88"
• Sensitivity: 84.387 dB

• Mini ANL Fuse
• 40 Amp Rating
• Designed for Optimal Signal Transfer
• Package Includes 2 Fuses

• 100 Amp Circuit Breaker
• Dust and splash proof
• Type III circuit breaker
• Easily mount on firewall or other panels
• Use as an alternative to fuse holders and fuses

• Peak Power: 2400 watts
• RMS Power: 800 watts
• Impedance: Dual 2 or 4 ohm
• Composite Paper Concave Cone
• Nitrile Butadiene Rubber NBR Surround
• Mount depth: 6.75"
• Sensitivity: 87.6 dB

• 6.5" Pro-Audio Horn Tweeter and 2.03" Compression Driver
• 640 watts Peak Each
• 320 watts RMS Each
• 8 ohm Impedance

• 5-Way high-voltage active crossover
• (2) front and (2) rear/sub inputs
• High/mid, high/mid/low, and mid/low outputs
• Features clip indicators

• RMS Power: 1500 - 3000 watts
• Impedance: Dual 1 ohm
• Double-pressed pulp Cone
• Nitrile Butadiene Rubber NBR Surround
• Mount depth: 10-1/8"

• Spade Terminals
• 4 Gauge
• 1 Red & 1 Black
• Nickel Plated
• Resealable Polybag

• RMS Power: 1000 - 2000 watts
• Impedance: Dual 1 ohm
• Double-pressed pulp Cone
• UV-resistant Santoprene Surround
• Mount depth: 13-3/16"

• Universal Vehicle Alarm/Remote Start Power Window Automation Kit
• Automatic Roll-up/down windows from your Alarm/Remote Start controller
• Two window Kit
• Intelligent safety sensor

• 12" Amplified Loaded Subwoofer System
• 1000 watts RMS
• Includes one MTX Audio TN500.1 amplifier
• Variable bass boost
• Mono preamp output
• EBC wired bass level remote control

• 300 watts x 1 channel @ 4 ohm
• 500 watts x 1 channel @ 2 ohm
• Total RMS Power: 500 watts
• Class D 2 ohm Stable Monoblock Amplifier

• Peak Power: 2000 watts
• RMS Power: 1000 watts
• Impedance: Dual 2 ohm
• Carbon Fiber Enhanced Non-Pressed Paper Cone
• Custom High Roll Foam Surround with black nylon stitching
• Mount depth: 6.30"
• Sensitivity: 82 dB (1W/1m)

• 14" Y-Cable • Proprietary 8-Pin Male Connector And Two Proprietary 8-Pin Female Connectors
• Allows you to add two Kenwood KCA-RC107MR Marine Wired Remotes To Your Compatible Kenwood Marine Headunit

• Digital remote controller for select JL Audio Amplifiers and DSPs
• Connects to the JLID port on the TwK’s chassis
• Works with VXi amplifiers, FiX and TwK processors
• Will work with MVi amplifiers via MVi DRC adapter
• Includes knob with 35" cable, 18 ft. control cable, spacers, and screws

• Retractable Top Mount Retractable Antenna
• 31" 4-Section Retractable Mast

• Peak Power: 1350 watts
• RMS Power: 450 watts
• Impedance: Single 2 or 4 ohm
• Glass Fiber Cone
• Rubber Surround
• Mount depth: 6-1/4"
• Sensitivity: 91 dB

• Easy-to-use bus/bar distribution block
• 6 Ring Terminal Connections
• Use when installing multiple amps
• 3/4" PVC body
• 1/4" aluminum bus bar
• 3/16" Clear acrylic cover
• Use as a grounding block or positive distribution

• 12-volt Absorbent Glass Mat (AGM) Secondary Battery
• Sealed Absorbent Glass Mat (AGM) design
• Perfect for 750W car audio stereo systems
• Compatible with most vehicle applications

• 60A AGU Fuse
• 4 Pack
• Nickel Plated
• Resealable Polybag
• Heavy Duty Construction

• 200 Amp V12 Series 24K Gold-Plated Circuit Breaker
• Manual Reset Button
• 1/0 or 4 Gauge In/Out
• Water Resistant Housing
• 24K Gold-plated

• Direct Connection to the factory harness
• Length: 5 feet
• Color coded wires for easy installation
• No cutting or splicing required

• 12" Dual Medium Sealed Subwoofer Enclosure
• 3/4" Medium Density Fiberboard (MDF) construction
• Miter and Dado construction
• Premium carpet finish
• Silver spring loaded terminal cups
• Glued and braced with fasteners
• Total box volume: 2.36 cubic feet

• For OEM* & Aftermarket screens
• Turn signal camera activation timed to 12 seconds or continuous activation
• Selectable Rear View Camera Priority
• Selectable Turn Signal Cameras have priority over the rear

• Measure True Amplifier Power Output
• Measure DC Voltage Drops
• Measure Common DC Voltages
• Measure Impedance of Speakers
• Measure Phase Difference

• 1-Way Remote Car Starter
• 4-Button Transmitter
• 1/4 mile (1320 ft.) range
• Features 2 auxiliary outputs
• Internal antenna and transmit LED
• Command buttons

• 12-volt to 6-volt step down converter
• Provides proper voltage for a 6V factory backup
• Includes a wiring harness with three wires

• 8" Dual Ported Subwoofer Enclosure
• 3/4" Medium Density Fiberboard (MDF) construction
• Total box volume: 1.30 cubic feet
• Compatible for Sundown SA8V2 and similar subwoofers (Sold separately)

• 12" Dual Ported Subwoofer Enclosure
• 3/4" Medium Density Fiberboard (MDF) construction
• Internal box volume: 3.25 cubic feet
• Premium Black Carpet with Black NVX Logo

• RMS Power: 300 watts
• Impedance: Single 4 ohm
• Polypropylene Cone
• Foam Surround
• Mount depth: 5.40"
• Sensitivity: 85.64 dB

• Peak Power: 4000 watts
• RMS Power: 2000 watts
• Impedance: Dual 1 ohm
• Enhanced Woven Fiber Paper Composite Cone
• Custom High Roll Foam Surround
• 30 mm Xmax (One Way)
• Sensitivity: 87.3 dB

•Digital Optical Audio Connection Cable
• Digital Optical Audio Connection Cable
• Built-in Toslink Connectors
• Length: 3 feet

• 40 watts x 4 channel @ 4 ohm
• 50 watts x 4 channel @ 2 ohm
• Bridged: 100 watts x 4 channel @ 4 ohm
• Total RMS Power: 200 watts
• Class D 2 ohm Stable 4-Channel Amplifier

• Complete Port Tube Kit
• 2" x 11" Port
• Achieve Greater Sound Pressure Levels with Less Distortion
• High Quality ABS Construction
• Mounting Hole Variations
• Designed in the U.S.A.

• 12-volt Lithium Racing Battery
• Sealed Lithium Titanate Oxide (LTO) design
• Ideal use for stock or aftermarket alternators
• Includes XS Power Li1208 IntelliCharger

• Accepts 4 AWG or 8 AWG wire
• Custom tooled solid brass
• HPP plating for superior corrosion resistance
• Platinum Finish

• Peak Power: 1300 watts
• RMS Power: 650 watts
• Impedance: Dual 4 ohm
• Carbon Fiber Enhanced Non-Pressed Paper Cone
• Custom High Roll Foam Surround with black nylon stitching
• Mount depth: 5.31"
• Sensitivity: 83 dB (1W/1m)

• Platinum-Plated Contacts
• Ultimate Circuit Protection
• High Conductivity Plating
• Maximum Current Transfer
• Designed to Fit Maxi Fuse Holders

• RGB RF Music Controller with Touch Activated Remote
• 6 multi-color modes and 5 music-lighting control modes
• Touch sensitive color wheel for color selection
• Working Voltage: 12-24V DC
• Receiver Range: 20-30 meters

• Shielded noise-rejecting Twisted-pair construction
• Heavy gauge OFC conductors ensure superior sound quality
• Split-tip Silver-Plated ends offer best in class signal transfer
• Molded ends equipped with colored channel identifiers

• Pair of empty single 1" tweeter pods
• Designed for C3 or C7 Tweeters (not included)
• Hard coated with a black anodized finish
• Easy mounting on almost any flat surface

• 15" Subwoofer Grille for Rockford Fosgate P2 and P3 models
• Black Gloss Finish
• Mesh Design for Maximum Protection

• Works with Mini ANL (MANL) or AFS Fuses
• Accepts 4 or 8 Gauge Wire
• All Brass Construction
• Polycarbonate Base and Cover

• Peak Power: 1200 watts
• RMS Power: 600 watts
• Impedance: Dual 4 ohm
• Enhanced Pressed Paper Cone
• High Roll Foam Surround
• Mount depth: 5.80"
• Sensitivity: 85 dB

• Marine Y-Adaptor Cable
• Compatible extension cable for PMX-1R and PMX-0R

• 36" RGBW LED wire extension
• Male micro-DIN 5-pin and female micro-DIN 5-pin connectors
• Designed for use with Metra RGBW-CB2 (Sold separately)

• 1/0 gauge Power Amplifier Installation Kit
• Designed specifically for car audio systems up to 4000 watts
• Stinger SHD201 water-resistant ANL fuse holder included

• 8-Channel Digital Signal Processor
• Designed to integrate with aftermarket or factory OEM systems
• Integrated LCD display and intuitive interface
• Includes 2 audio inputs and 8 independent outputs
• 15-graphic equalizer with separate parametric equalizers

• 12-volt Absorbent Glass Mat (AGM) Car Battery
• Sealed Absorbent Glass Mat (AGM) design
• Perfect for 3000W audio stereo systems
• Compatible with many Domestic and Japanese vehicles

• Ring Terminals
• 5/16" Opening
• 0/1 Gauge
• 1 Red & 1 Black
• Nickel Plated
• Resealable Polybag

• Peak Power: 600 watts
• Built-in D amplifier
• Weatherproof IPX-5 Rating
• (2) 8" 2-way Coaxial speakers
• (2) 1" Balanced Dome Titanium Tweeters
• AUX input for smartphones and MP3