Garage
Shop
Account Icon
Account
Box Icon
Track
order
Telephone Icon
Call
Help Icon
Help
Door with Arrow Icon
Sign In
  1. Home
  2. Discontinued Car Audio & Electronics
  3. Discontinued Car Amplifiers
  4. Discontinued Mini Car Amps

Discontinued Mini Car Amps

Filters
Reset Done
Product Type
Price Range
Number of Channels
Each channel on an amplifier will power one speaker using a positive and negative cable. There are various types of amplifiers, each designed to power a certain number of speakers. Monoblock amplifiers, also known as single channel, are designed to power one or more subwoofers. These amplifiers often have very high power ratings. On the other hand, multi-channel amplifiers power multiple speakers, usually at lower power ratings. 2-Channel and 4-Channel amplifiers can power car speakers or low powered subwoofers. Occasionally you might see a 5 or 6-channel amplifier that can power speakers and subwoofers at the same time. The most common setup is a monoblock amp to run subwoofers and a 4-channel amp to run door speakers. Check out our Knowledge Base for more information.
Amplifier Key Features
Amplifiers can offer a diverse array of features. If you select more than one feature, then you will view amplifiers that have ALL features selected. These include speaker-level inputs that facilitate seamless integration with factory audio systems, Bluetooth connectivity suitable for ATV/UTV or Classic vehicle setups, built-in DSPs that provide enhanced control over your audio signal, and a host of other functionalities to explore.
Amplifier Class

An amplifier increases the power of the signal being fed to it by taking energy from its power supply and matching the signal but increasing its amplitude. Amplifiers use many different methods for converting these electrical signals and have been categorized into classes.

Class A/B: Greater than 50% of the input signal is amplified while the other percentage is “off”. These amplifiers have a small amount of current flowing through the output transistors all the time which almost eliminates crossover distortion. Class A/B has great sound quality but is not as efficient as class D. These amps are most commonly used to drive speakers.

Class D: Also known as switching amplifiers, class D amps have output transistors that are completely turned “on” or “off”. This means that when the transistors are on, there is almost no voltage across them but when they are off there is significant voltage but no current flowing through it which makes these amplifiers very efficient at the cost of sound quality. These amps are most commonly used to drive subwoofers.

Other Classes: You may see classes such as GH, bD, X, FD, etc. by some manufactures. These amplifiers tend to be either class A/B, D or a hybrid of the two but with improvements to their designs that can make them more efficient or offer better sound quality.
Total RMS Power Output
Total RMS power is measured by multiplying RMS power per channel by the number of channels, and is calculated at the lowest level of operating impedance.

RMS power is the amount of continuous power, measured in watts, that an amplifier produces is called RMS power. The higher the RMS figure, the louder and cleaner your music sounds.

The RMS output figure is much more accurate than the peak rating when comparing products.
Total Peak Power Output
The total peak power output is measured as the wattage per channel multiplied by the number of channels, and is calculated at the lowest level of operating impedance.

It is measured during a brief musical burst, such as a sudden drum accent. Some manufacturers display peak power ratings on the face of their products to increase the appeal.

The RMS power rating is more accurate, and we recommend using it for product comparison.
Series
Many brands group their products into series or lines of products to help customers know the level of quality (good, better, best for example). You can filter by series and the brand using our guided browsing.
Minimum Impedance Unbridged
The lowest impedance the amplifier will handle when it is not bridged.
Minimum Impedance Bridged
The lowest impedance the amplifier will handle when it is bridged.
Remote bass/level controller
If the amp comes with a bass/gain remote you will be able to control the level of your bass from your dashboard. Typically bass remotes also include a 16-20 ft. wire for installation.
Sonic Certified Amplifier
Sonic Certified amplifiers have been tested by the experts at Sonic Electronix to meet or exceed the wattage ratings provided by the manufacturer. If this is marked as Yes, then you can trust the wattage ratings. If marked as No, then we have tested the amplifier and it did not meet the advertised wattage ratings. If marked as Not Tested, then the Sonic Electronix experts have not yet been able to test the amp.
Preamp Outputs
Many amplifiers are equipped with RCA preamp outputs which pass the original music signal from the source to additional amplifiers. This is known as daisy chaining because the source connects to the first amp, and the first amp connects to the second amp, etc. The advantage to daisy chaining is you only need one 2-channel RCA cable to transfer the signal from the head-unit to the amplifier, and then one additional cable for each amp being daisy chained.
Built-in Crossover

A crossover is a type of filtering system that permits only certain frequencies to play. A Low-Pass (LP) crossover allows only frequencies below its setting to get through which is good in the case of some subwoofers. A High-Pass(HP) filter allows frequencies above its setting to pass through, this is normally used on speakers.

When a crossover is set to FULL it means no filtering is added and the full frequency spectrum is allowed through the amplifier. Filtering is important because feeding a speaker frequencies it cannot reproduce effectively creates distortion.

Amp Bluetooth Connectivity
This feature will tell you if the amplifier has the capability to connect to a Bluetooth device.
Deals
Promotions we have offer More Ways to Shop for items that are on clearance, last chance, special offer and sales, Made in America, and more!
Condition

Shop the Category

filter-icon Filters & Sort
You are currently viewing discontinued products.

NVX MVPA4 (Factory Refurbished)

Micro-V Series 400W RMS 4-Channel Bridgeable Micro Class D Compact Car Amplifier (MVPA.4)

No picture DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

NVX MVPA4 (Factory Refurbished)

Micro-V Series 400W RMS 4-Channel Bridgeable Micro Class D Compact Car Amplifier (MVPA.4)

• The size of a postcard with 400 Watts True RMS Output!
• • MVP Series 4-Channel Micro Class D Amplifier
• 50W x 4-Chan. @ 4 ohm
• 100W x 4-Chan. @ 2 ohm
• 3-Way System Protection
• 4/3/2/1 Channel Operation
• 8 Gauge Power and Ground Inputs
• Extremely Small Footprint!

• The size of a postcard with 400 Watts True RMS Output!
• • MVP Series 4-Channel Micro Class D Amplifier
• 50W x 4-Chan. @ 4 ohm
• 100W x 4-Chan. @ 2 ohm
• 3-Way System Protection
• 4/3/2/1 Channel Operation
• 8 Gauge Power and Ground Inputs
• Extremely Small Footprint!

Kicker KX200.2 (40KX200.2)

200W RMS KX Series 2-Channel Class D-IC Stereo Bridgeable Car Power Amplifier (KX2002)

KX200.2-2 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Kicker KX200.2 (40KX200.2)

200W RMS KX Series 2-Channel Class D-IC Stereo Bridgeable Car Power Amplifier (KX2002)

• 50W x 2 Chan. @ 4 ohm
• 100W x 2 Chan. @ 2 ohm
• Bridged: 200W x 1 Chan. @ 4 ohm
• 3-Way System Protection
• Single Channel Operation
• 4 Gauge Power and Ground Inputs
• Stylish Magnetic Panel Covers Tuning Options for Clean Install

1

• 50W x 2 Chan. @ 4 ohm
• 100W x 2 Chan. @ 2 ohm
• Bridged: 200W x 1 Chan. @ 4 ohm
• 3-Way System Protection
• Single Channel Operation
• 4 Gauge Power and Ground Inputs
• Stylish Magnetic Panel Covers Tuning Options for Clean Install

NVX MVPA1 Open Box

Micro-V Series 300W RMS Monoblock Class D Compact Car Amplifier (MVPA.1)

MVPA1 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

NVX MVPA1 Open Box

Micro-V Series 300W RMS Monoblock Class D Compact Car Amplifier (MVPA.1)

• Incredibly Tiny! The size of a postcard!
• RMS: 200 x 1 @ 4 ohm, 300W x 1 @ 2 ohm
• Total RMS Power: 300W
• CEA-2006 Compliant
• Switchable Bass Boost: (0dB/+6dB/+12dB)
• Extremely Small Footprint
• Dimensions: 4"W x 5-7/16"L x 1-9/16"H

• Incredibly Tiny! The size of a postcard!
• RMS: 200 x 1 @ 4 ohm, 300W x 1 @ 2 ohm
• Total RMS Power: 300W
• CEA-2006 Compliant
• Switchable Bass Boost: (0dB/+6dB/+12dB)
• Extremely Small Footprint
• Dimensions: 4"W x 5-7/16"L x 1-9/16"H

Kicker KX1200.1 (40KX1200.1)

1200W RMS KX Series Monoblock Class D Car Power Amplifier

40KX1200.1 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Kicker KX1200.1 (40KX1200.1)

1200W RMS KX Series Monoblock Class D Car Power Amplifier

• RMS: 600W x 1 @ 4 ohm, 1200W x 1 @ 2 ohm
• Total Peak Power: 2400W
• CEA-2006 Compliant
• Kick EQ+ Bass Boost: 0-18 dB from 20-80 Hz
• Magnetic Panel Covers Controls
• Dimensions: 8-5/16"W x 9-9/16"L x 2-1/8"H

• RMS: 600W x 1 @ 4 ohm, 1200W x 1 @ 2 ohm
• Total Peak Power: 2400W
• CEA-2006 Compliant
• Kick EQ+ Bass Boost: 0-18 dB from 20-80 Hz
• Magnetic Panel Covers Controls
• Dimensions: 8-5/16"W x 9-9/16"L x 2-1/8"H

Kenwood KAC-M1804

400W 4-Channel Class-D Compact Digital Car Marine/ATV Amplifier

KAC-M1804 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Kenwood KAC-M1804

400W 4-Channel Class-D Compact Digital Car Marine/ATV Amplifier

• RMS Power: 45W x 4 @ 4 ohm
• Total Peak Power: 400W
• CEA-2006 Compliant
• Dimensions: 5-1/2" W x 3-9/16" D x 1-5/16" H

9

• RMS Power: 45W x 4 @ 4 ohm
• Total Peak Power: 400W
• CEA-2006 Compliant
• Dimensions: 5-1/2" W x 3-9/16" D x 1-5/16" H

RE Audio SA500.1

500W Monoblock SA Series Class D Amplifier

SA500.1 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

RE Audio SA500.1

500W Monoblock SA Series Class D Amplifier

• 150 Watts RMS x 1 @ 4 ohm
• 250 Watts RMS x 1 @ 2 ohm
• Total Peak Power: 500 Watts
• CEA-2006 Compliant
• Variable Bass Boost : 0 to +12 dB bass boost at 45 Hz

• 150 Watts RMS x 1 @ 4 ohm
• 250 Watts RMS x 1 @ 2 ohm
• Total Peak Power: 500 Watts
• CEA-2006 Compliant
• Variable Bass Boost : 0 to +12 dB bass boost at 45 Hz

Earthquake Sound MiNi D2500

2500W Peak (2000W RMS) MiNi Series Class-D Monoblock 1-Ohm Stable Amplifier with Remote Level Control

MiNi D2500 V2 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Earthquake Sound MiNi D2500

2500W Peak (2000W RMS) MiNi Series Class-D Monoblock 1-Ohm Stable Amplifier with Remote Level Control

• 850 Watts RMS x 1 @ 4 ohm
• 1800 Watts RMS x 1 @ 2 ohm
• 2000 Watts RMS x 1 @ 1 ohm
• Total Peak Power: 2500 Watts
• Built-In Low-Pass and Subsonic Filters
• Compact Size Gives More Installation Options
• Aluminum Heatsink
• Dimensions: 12-13/16" W x 6-5/16" L x 1-7/8" H

• 850 Watts RMS x 1 @ 4 ohm
• 1800 Watts RMS x 1 @ 2 ohm
• 2000 Watts RMS x 1 @ 1 ohm
• Total Peak Power: 2500 Watts
• Built-In Low-Pass and Subsonic Filters
• Compact Size Gives More Installation Options
• Aluminum Heatsink
• Dimensions: 12-13/16" W x 6-5/16" L x 1-7/8" H

Kicker PX100.2 (12PX200.2)

2-Channel Powersports Series Amplifier

PX100.2 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Kicker PX100.2 (12PX200.2)

2-Channel Powersports Series Amplifier

• 4 ohm: 25 watts x 2 chan.
• 2 ohm: 50 watts x 2 chan.
• Bridged, 4 ohm: 100 watts x 1 chan
• Uses the vehicle’s charging system as power supply for 90-percent efficiency

4

• 4 ohm: 25 watts x 2 chan.
• 2 ohm: 50 watts x 2 chan.
• Bridged, 4 ohm: 100 watts x 1 chan
• Uses the vehicle’s charging system as power supply for 90-percent efficiency

Soundstream STL1.600D

600W Stealth Series Stackable Class D Compact Monoblock Amplifier

STL1.600D big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Soundstream STL1.600D

600W Stealth Series Stackable Class D Compact Monoblock Amplifier

Stealth Series Monoblock Class D Car Amplifier • 600W x 1 Chan. @ 2 Ohm • 400W x 1 Chan. @ 4 Ohm • Double Side PCB And SMD Components • Remote Bass Level Input • Active X-Over • 3-Way System Protection Circuitry

1

Stealth Series Monoblock Class D Car Amplifier • 600W x 1 Chan. @ 2 Ohm • 400W x 1 Chan. @ 4 Ohm • Double Side PCB And SMD Components • Remote Bass Level Input • Active X-Over • 3-Way System Protection Circuitry

Clarion XC1410

300W XC Series Micro 4-Channel Class-D Compact Design Car Amplifier

XC1410 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Clarion XC1410

300W XC Series Micro 4-Channel Class-D Compact Design Car Amplifier

• 50W x 4-Chan. @ 4 ohm
• 75W x 4-Chan. @ 2 ohm
• 3-Way System Protection
• 4-Channel Operation
• 8 Gauge Power and Ground Inputs
• Micro Size Amplifier for Maximizing Space Saving Applications

74

• 50W x 4-Chan. @ 4 ohm
• 75W x 4-Chan. @ 2 ohm
• 3-Way System Protection
• 4-Channel Operation
• 8 Gauge Power and Ground Inputs
• Micro Size Amplifier for Maximizing Space Saving Applications

AudioControl ACM4300 (Open Box, Complete)

300W RMS ACM Series 2 ohm Stable 4-Channel Class-D Amplifier

ACM-4.300 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

AudioControl ACM4300 (Open Box, Complete)

300W RMS ACM Series 2 ohm Stable 4-Channel Class-D Amplifier

• 50 Watts RMS x 4 @ 4 ohm
• 175 Watts RMS x 2 @ 2 ohm
• 150 Watts RMS x 2 @ 4 ohm, Bridged
• Small Footprint for Flexible Mounting
• AccuBASS and GTO Signal Sense Built In
• Linkwitz-Riley Crossover
• Aluminum Heatsink
• Dimensions: 9.4" W x 3" L x 1.75" H

1

• 50 Watts RMS x 4 @ 4 ohm
• 175 Watts RMS x 2 @ 2 ohm
• 150 Watts RMS x 2 @ 4 ohm, Bridged
• Small Footprint for Flexible Mounting
• AccuBASS and GTO Signal Sense Built In
• Linkwitz-Riley Crossover
• Aluminum Heatsink
• Dimensions: 9.4" W x 3" L x 1.75" H

Massive Audio BLX44

690W Max (240W RMS) Bluetooth, Water and Dust Proof Nano Blu Class-D 4-Channel 2 Ohm Stable Amp

BLX44-2 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Massive Audio BLX44

690W Max (240W RMS) Bluetooth, Water and Dust Proof Nano Blu Class-D 4-Channel 2 Ohm Stable Amp

• 120 Watts RMS x 4 @ 4 ohm
• 240 Watts RMS x 2 @ 2 ohm
• 480 Watts RMS x 2 @ 4 ohm, Bridged
• Total Peak Power: 960 Watts
• CTA-2006 Compliant
• Bluetooth Capable with Separate Dongle
• Conformal Coating Protects Against Water, Dust, Heat
• 8.5" L x 4.25" W x 1.6" H

• 120 Watts RMS x 4 @ 4 ohm
• 240 Watts RMS x 2 @ 2 ohm
• 480 Watts RMS x 2 @ 4 ohm, Bridged
• Total Peak Power: 960 Watts
• CTA-2006 Compliant
• Bluetooth Capable with Separate Dongle
• Conformal Coating Protects Against Water, Dust, Heat
• 8.5" L x 4.25" W x 1.6" H

Earthquake MiNi D1500.2

1500W RMS Class D 2-Channel Mini Series Amplifier

MiNi D1500.2 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Earthquake MiNi D1500.2

1500W RMS Class D 2-Channel Mini Series Amplifier

• RMS Power: 130W x 2 @ 4 ohm, 180W x 2 @ 2 ohm, Bridged, 360 watts x 1 @ 4 ohm
• Total Peak Power: 1500W
• Variable Bass Boost
• Optical Control Circuitry
• Crossover Frequencies: 20-500Hz

2

• RMS Power: 130W x 2 @ 4 ohm, 180W x 2 @ 2 ohm, Bridged, 360 watts x 1 @ 4 ohm
• Total Peak Power: 1500W
• Variable Bass Boost
• Optical Control Circuitry
• Crossover Frequencies: 20-500Hz

Kicker KX400.1 (40KX400.1)

400W RMS KX Series Monoblock Class-D Car Power Amplifier

40KX400.1 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Kicker KX400.1 (40KX400.1)

400W RMS KX Series Monoblock Class-D Car Power Amplifier

• RMS: 200W x 1 @ 4 ohm, 400W x 1 @ 2 ohm
• Total Peak Power: 800W
• CEA-2006 Compliant
• Kick EQ+ Bass Boost: 0-18 dB from 20-80 Hz
• Magnetic Panel Covers Controls
• Dimensions: 8-5/16"W x 8"L x 2-1/8"H

• RMS: 200W x 1 @ 4 ohm, 400W x 1 @ 2 ohm
• Total Peak Power: 800W
• CEA-2006 Compliant
• Kick EQ+ Bass Boost: 0-18 dB from 20-80 Hz
• Magnetic Panel Covers Controls
• Dimensions: 8-5/16"W x 8"L x 2-1/8"H

Kicker PXA300.4 (42PXA3004)

300W 4-Channel PXA-Series Powersports/ATV/Motorcycle/Car/Boat/Mini Amplifier

42PXA3004 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Kicker PXA300.4 (42PXA3004)

300W 4-Channel PXA-Series Powersports/ATV/Motorcycle/Car/Boat/Mini Amplifier

• RMS: 50W x 4 @ 4 ohm, 75W x 4 @ 2 ohm, 150W x 2 @ 1 ohm
• Total RMS power output: 200 Watts
•Weather-resistant with a conformal-coated circuit board
•Specifically designed for motorized vehicles
• No-rust, stainless-steel mounting hardware and a single Molex plug

4

• RMS: 50W x 4 @ 4 ohm, 75W x 4 @ 2 ohm, 150W x 2 @ 1 ohm
• Total RMS power output: 200 Watts
•Weather-resistant with a conformal-coated circuit board
•Specifically designed for motorized vehicles
• No-rust, stainless-steel mounting hardware and a single Molex plug

Power Acoustik CA4-1600D

1600W Max 4-Channel Class D Crypt Series Amplifier

CA4-1600D big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Power Acoustik CA4-1600D

1600W Max 4-Channel Class D Crypt Series Amplifier

• RMS Power: 130W x 4 @ 4 ohm, 200W x 4 @ 2 ohm
• Total Peak Power: 1600W
• High and Low Pass Filters
• Dimensions: 3" W x 6" L x 1.5" H

6

• RMS Power: 130W x 4 @ 4 ohm, 200W x 4 @ 2 ohm
• Total Peak Power: 1600W
• High and Low Pass Filters
• Dimensions: 3" W x 6" L x 1.5" H

Massive Audio N3 (ES - Special Edition)

Ultra Compact 2800W Max Nano Block Series Monoblock Class D Amplifier

169.99
N3-ES big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Massive Audio N3 (ES - Special Edition)

Ultra Compact 2800W Max Nano Block Series Monoblock Class D Amplifier

• RMS: 450W x 1 @ 4 ohm, 700W x 1 @ 2 ohm, 1400W x 1 @ 1 ohm
• Total Peak Power: 2800W
• CEA-2006 Compliant
• Selectable Bass Boost: 0, +6, +12 dB
• Class D Circuitry
• Dimensions: 10-5/16"L x 5-1/2"W x 2-1/8"H

Promo Savings Icon 169.99

• RMS: 450W x 1 @ 4 ohm, 700W x 1 @ 2 ohm, 1400W x 1 @ 1 ohm
• Total Peak Power: 2800W
• CEA-2006 Compliant
• Selectable Bass Boost: 0, +6, +12 dB
• Class D Circuitry
• Dimensions: 10-5/16"L x 5-1/2"W x 2-1/8"H

Alpine KTP-445U Open Box Complete

Universal Class D 4-Channel Head Unit Power Pack for Use with all Aftermarket & Factory Receivers

KTP-445U big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Alpine KTP-445U Open Box Complete

Universal Class D 4-Channel Head Unit Power Pack for Use with all Aftermarket & Factory Receivers

• Item Condition: Open Box Complete
• RMS Power: 45W x 4-Chan. @ 4 Ohm
• Adjustable Gain Switch
• Plug-and-Play
• CEA-2006 Compliant

• Item Condition: Open Box Complete
• RMS Power: 45W x 4-Chan. @ 4 Ohm
• Adjustable Gain Switch
• Plug-and-Play
• CEA-2006 Compliant

Earthquake Sound MiNi D 2000

2000 W Max (1200 W RMS) MiNi Series Class-D Monoblock 1 Ohm Stable Amplifier with Bass Knob

MiNi D 2000 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Earthquake Sound MiNi D 2000

2000 W Max (1200 W RMS) MiNi Series Class-D Monoblock 1 Ohm Stable Amplifier with Bass Knob

• 650 Watts RMS x 1 @ 4 ohm
• 1000 Watts RMS x 1 @ 2 ohm
• 1200 Watts RMS x 1 @ 1 ohm
• Total Peak Power: 2000 Watts
• Low-Pass and Subsonic Filters Built-In
• 0 - 12 dB Bass Boost
• Aluminum Heatsink
• Dimentions: 6-5/16"W x 10-9/16"L x 1-15/16"H

• 650 Watts RMS x 1 @ 4 ohm
• 1000 Watts RMS x 1 @ 2 ohm
• 1200 Watts RMS x 1 @ 1 ohm
• Total Peak Power: 2000 Watts
• Low-Pass and Subsonic Filters Built-In
• 0 - 12 dB Bass Boost
• Aluminum Heatsink
• Dimentions: 6-5/16"W x 10-9/16"L x 1-15/16"H

Crunch PX2000.1D

2000W Max Power X Series 1-ohm Stable Class D Monoblock Subwoofer Amplifier with Wired Remote Bass Level Control

PX2000.1D big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Crunch PX2000.1D

2000W Max Power X Series 1-ohm Stable Class D Monoblock Subwoofer Amplifier with Wired Remote Bass Level Control

• 250 Watts RMS x 1 @ 4 ohm
• 500 Watts RMS x 1 @ 2 ohm
• 1000 Watts RMS x 1 @ 1 ohm
• Total Peak Power: 2000 Watts
• Variable low-pass filter: 30 - 250 Hz
• Subsonic filter: 20 - 50 Hz
• Variable Bass Boost: 0 to +18 dB bass boost
• Dimensions: 10.8"W x 13.3"L x 3.7"H

1

• 250 Watts RMS x 1 @ 4 ohm
• 500 Watts RMS x 1 @ 2 ohm
• 1000 Watts RMS x 1 @ 1 ohm
• Total Peak Power: 2000 Watts
• Variable low-pass filter: 30 - 250 Hz
• Subsonic filter: 20 - 50 Hz
• Variable Bass Boost: 0 to +18 dB bass boost
• Dimensions: 10.8"W x 13.3"L x 3.7"H

Prev 1 2 3 4 5 Next

Items per page: 20 40 60

    Clear all

    FAQ Frequently asked questions in Discontinued Mini Car Amps

    Mini Amps Frequently Asked Questions (FAQ)
    Mini amps, also known as micro or compact amplifiers, are smaller-sized amplifiers designed to deliver enhanced audio performance in a compact form factor. Despite their small size, mini amps can still pack a punch and significantly improve your car audio system's sound quality. They are ideal for vehicles with limited space or for those seeking a discreet installation. Mini amps are available in various configurations, including 2-channel and 4-channel options, providing flexibility in powering different speakers or subwoofers. While traditional amplifiers may offer more power and features, mini amps strike a balance between size and performance, making them suitable for both OEM and aftermarket audio systems.
    Yes, mini amps are capable of powering both speakers and subwoofers in your car audio system, but the power output will be more limited compared to larger amplifiers. The wattage of mini amps typically ranges from around 50 to 200 watts per channel. For most standard car audio setups, a well-chosen mini amp can provide ample power to drive your speakers, resulting in improved sound clarity and dynamics. Additionally, mini amps with bridgeable configurations can power a subwoofer, providing the low-frequency bass response you desire. However, for enthusiasts seeking extremely high-power setups or multiple subwoofers, larger amplifiers might be more suitable. Sonic Electronix offers a wide range of mini amps with varying power outputs, so you can find one that best fits your specific car audio needs.
    Mini amps are generally designed for easy installation and are suitable for DIY enthusiasts. They come with detailed instructions, wiring diagrams, and mounting hardware, making the installation process straightforward. Most mini amps use standard wiring connections, such as RCA inputs and speaker wire outputs, making them compatible with various car audio systems. However, while the installation is relatively simple, it does require a basic understanding of car audio wiring and electrical connections. If you're not comfortable working with car audio systems, it's best to seek professional installation to ensure a seamless and error-free setup. Sonic Electronix's knowledgeable staff can provide installation advice and guidance, helping you make the most of your mini amp and achieve the best audio performance.
    Like all amplifiers, mini amps generate heat during operation. While they produce less heat than larger amps due to their lower power output, it's still essential to consider ventilation during installation. Mounting the mini amp in a well-ventilated area with sufficient air circulation helps dissipate the heat, preventing overheating and potential damage to the amp. Avoid installing the mini amp in enclosed spaces or areas exposed to direct sunlight, as this can lead to temperature build-up. Some mini amps come with built-in cooling features like heat sinks or fans, which aid in heat dissipation. Additionally, ensuring that the mini amp is securely mounted will prevent vibrations that may affect its performance. Following proper installation guidelines will optimize your mini amp's efficiency and lifespan.
    Mini amps are compatible with both factory car stereos and aftermarket head units. They typically feature speaker-level inputs, allowing you to connect them directly to your factory stereo's speaker wires. This feature is essential as most factory stereos do not have RCA preamp outputs required for traditional amplifier connections. By using speaker-level inputs, you can easily integrate a mini amp into your factory audio system, enhancing its performance without replacing the head unit. However, if you prefer additional audio customization features or advanced connectivity options, upgrading to an aftermarket head unit can be beneficial. Aftermarket head units often provide RCA outputs, enabling a cleaner and noise-free connection to the mini amp. Whether you choose to use your factory stereo or upgrade to an aftermarket head unit, Sonic Electronix offers mini amps that cater to various installation requirements.
    why-shoping-with-sonic

    We love people and we're ready to help you! See what separates us from our competition.

    Take advantage of our VIP rewards like 10% back on your purchases, free 2-day shipping, extended warranties, and free returns! Gain access to all of these rewards without any membership fees.
    Get great discounted (and possibly FREE) installation accessories with most car stereo purchases. This includes dash kits, wiring harnesses and antenna adapters that you will need to properly install your new car stereo.
    We are an Authorized Dealer for all the brands we sell, including the most premium brands in car and marine audio such as Hertz, JL Audio, NVX, Rockford Fosgate, Kicker, Alpine, Kenwood and many more.
    Shop Deals and get up to 30% off premium brands! Shop Now! We are always looking out for the best products and deals to offer our customers. Don’t pay too much by shopping elsewhere!
    We have information on brands, gear, and more for you to explore! Check out our YouTube Channel for helpful how-to videos, product reviews, and Q&As. For a more detailed look, also visit our Learning Center!
    Our trained experts are here to assist you! They are just a phone call or click away to help you get the right gear for you and your vehicle!
    Why Shop With Us?
    Save up to 10 different vehicles in your garage
    Vehicle
    Store     Delete

    1998 Ford Expedition

    2012 Audi S5

    2013 Scion xB

    2009 Dodge Caliber

    2012 BMW M6

    2015 Dodge Ram C/V

    2008 Lexus IS350

    2014 Jeep Patriot

    2013 Subaru BRZ

    2000 Volvo V70

    Add vehicle Clear all vehicles
    Where to find vehicle info
    Are you sure you want to clear your garage?
    This action cannot be undone. Confirm

    Cancel

    This page was not designed for products.
    If you continue, you will be redirected to a category customized for your vehicle. Continue

    Cancel

    Shop your 1998 Expedition
    Why Use a Vehicle Fit Guide?
    Change vehicle | Shop without vehicle
    Whoa! Slow down. Add your details below!
    additional information required
    Add vehicle details to confirm fitment
    Ignore fitment details
    Find stereos and more that work -- fast.

    Additional information:

    Remove

    Can't find your vehicle? Click here and we'll help.

    Where to find vehicle info

    Go to Fitment

    Didn't find your car?

    Submit your details and we'll help!
    Please enter the letters as they are shown in the image above. Letters are not case-sensitive.
    Identify your vehicle and submodel details
    • Owner's manual
    • Vehicle's insurance card
    • Vehicle registration
    • Vehicle produced after 2005: Inside driver's side door
    • Vehicle produced before 2005: Rear passenger doorjamb, glove box, center console, or engine compartment
    Car Info Side Door Icon
    Vehicle Registration Icon
    Vehicle Insurance Icon
    Back

    Modern vehicles often require specific brackets, wiring harnesses, and mounting solutions. A fit guide ensures:

    • You see only parts engineered for your exact vehicle
    • You avoid incompatible radios, speakers, or wiring
    • Installation is smoother, faster, and frustration-free
    • You get the correct accessories the first time

    Whether you're replacing a factory stereo or upgrading your entire audio system, the Fit Finder eliminates uncertainty.

    Back
    Track your order
    Call our experts
    Support Center
    Return & Exchanges
    Follow on Instagram Instagram logo
    Subscribe on YouTube YouTube logo