Discontinued Monoblock Amplifiers

• DX Series Monoblock Class D Car Amplifier
• 275 Watts x 1-Channel @ 2 Ohm
• 140 Watts x 1-Channel @ 4 Ohm
• Muting Circuit
• 3 Automatic Turn-On Modes
• Balanced Differential Inputs

• RMS Power: 500W x 1 @ 4 ohm, 1000W x 1 @ 2 ohm, 1500W x 1 @ 1 ohm
• Total Peak Power: 1500W
• Variable Low-Pass Filter (40-180 Hz)
• Dimensions: 6"W x 13.5"L x 2"H

HFi Series Single Channel Monoblock Class D Car Amplifier • PWM MOSFET power supply • High Performance Battery from Shuriken • 80 Amp Hours • 1900 Crank Amps • 200 amp Battery Isolator and Relay • Extends battery life

1300 watts RMS x 1 at 2 ohm • Class-D • variable low-pass filter • Dynamic Bass Optimization circuit • preamp outputs

• 500 Watts RMS x 1
• Sensitivity: 87.15 dB
• Mounting depth: 6.65 "
• Injection-molded, mineral-filled polypropylene cone
• Nitrile butadiene rubber surround
•Customization trim ring
• Floating Cone Attach Method
• DMA Optimized Motor
• Wired remote bass level control included
• CEA-2006 Compliant
• Signal to Noise Ration: 105 dBA
• Variable Bass Boost: 0 to +12 dB bass boost at 44 Hz
• Dimensions: 6-3/4" W x 12-15/16" L x 1-13/16" H

• R1200-1D 1200W RMS Prime Series Monoblock Class D Car Amplifier
• Two VSW124V2 600W RMS 12" VS-Series Dual 4-ohm Car Subwoofers

Factory Reconditioned with 90 Days Manufacturer's warranty, 750W RMS x 1 at 2 ohm • Class D design • wired remote bass level control • preamp outputs • CEA-2006 compliant • subsonic filter

• RMS: 200W x 1 @ 4 ohm, 400W x 1 @ 2 ohm, 800W x 1 @ 1 ohm
• Total Peak Power: 1600W
• CEA-2006 Compliant
• Selectable Bass Boost: 0, +6, +12 dB
• Class D Circuitry
• NVX XKIT42 100% Copper 4 Gauge Car Amp Install Kit w/ 2-Ch RCA

DX Series Monoblock Class D Car Amplifier • 1000 Watts x 1-Channel @ 1 Ohm • 550 Watts x 1-Channel @ 2 Ohm • 280 Watts x 1-Channel @ 4 Ohm • Muting Circuit • 3 Automatic Turn-On Modes • Balanced Differential Inputs

• 2 RE Audio Subs with a Matching Kicker Amp
• RMS: 1200W x 1 @ 4 ohm, 2400W x 1 @ 2 ohm
• Total Peak Power: 3200W
• CEA-2006 Compliant
• Kick EQ+ Bass Boost: 0-18 dB from 20-80 Hz
• Magnetic Panel Covers Controls
• Dimensions: 8-5/16"W x 15-1/2"L x 2-1/8"H

1600W Max, Intake Monoblock Amplifier • Optional bass remote and digital volt-meter display available and sold separately • Class A/B • 800W RMS @ 2 ohm • 400W RMS @ 4 ohm • Preamp outputs • Cobalt Blue Illumination • Intake cooling fan • 4-way protection circuitry

Picasso Series Monoblock Class D Car Amplifier • 800W x 1 chan. @ 4 ohm • 1500W RMS • Twin Stack Technology • Anodized heatsink • Variable low-pass filter • Subsonic filter

• RMS: 250W x 1 @ 4 ohm, 400W x 1 @ 2 ohm
• Total Peak Power: 700W
• CEA-2006 Compliant
• Bass Boost: 0-18 dB
• Class D Circuitry
• Dimensions: 13-3/16"L x 7-1/2"W x 2"H

• RMS: 475W x 1 @ 4 ohm, 750W x 1 @ 2 ohm, 1000W x 1 @ 1 ohm
• Total Peak Power: 1000W
• Fluid-Fets MOSFET Power Supply
• Q-Stasis Pre-Amplifier Stage
• Heavy Duty Aluminum Alloy Heat-Sink
• Dimensions: 9.50"W x 14.41"L x 2.34"H

• Peak: 750W x 1 @ 4 ohm, 1500W x 1 @ 2 ohm
• Total Peak Power: 1500W
• 1 Pair of Preamp Outputs
• Bass Boost: 0-12 dB at 50 Hz
• Low Pass Filter: 40-150 Hz
• Dimensions: 9-1/16"W x 17-1/8"D x 2-5/16"H

• 300 Watts RMS x 1 @ 2 ohm
• Total Peak Power: 600 Watts
• Variable low-pass filter: 32 - 320 Hz, 24 dB/octave
• Variable Bass Boost: 0 to +12 dB bass boost at 45 Hz
• 0 to 180 degree Phase Output
• Dimensions: 12.3" W x 7.4" L x 3.74" H

1800W Class-D Monoblock Amplifier • 500W RMS x 1 @ 4 ohm • 900W RMS x 1 @ 2 ohm • Variable Low-Pass and Subsonic Filter • High and Low Level Inputs • 1 Pair RCA Outputs • 0 - 18 dB Bass Boost

Item is used and has been installed
• Peak: 475W x 1 @ 4 ohm, 750W x 1 @ 2 ohm, 1000W x 1 @ 1 ohm
• Total Peak Power: 1000W
• Built-In System Diagnostics
• Variable Bass EQ: 0 to +10 dB at 45 Hz
• Class D Circuitry
• Dimensions: 8-5/16"W x 15-1/2"D x 2-3/8"H

• 450 Watts RMS x 1 @ 4 ohm
• 700 Watts RMS x 1 @ 2 ohm
• 1400 Watts RMS x 1 @ 1 ohm
• Total Peak Power: 2800 Watts
• CEA-2006 Compliant
• Built for Powersports and Marine Applications
• HEATSINK
• Dimensions: 11.5" W x 4.25" L x 1.6" H

100W x 1 Chan. @ 2 Ohm RMS • Description Coming Soon!