Garage
Shop
Account Icon
Account
Box Icon
Track
order
Telephone Icon
Call
Help Icon
Help
Door with Arrow Icon
Sign In
  1. Home
  2. Belva Store
  3. Discontinued Belva Car Audio & Electronics
  4. Discontinued Belva Car Amplifiers
  5. Discontinued Belva Monoblock Amplifiers

Discontinued Belva Monoblock Amplifiers

Belva has many years of car audio and monoblock amplifier experience.

Match Amps to Subs
Filters
Belva ✕
Clear Filters
Reset Done
Product Type
Price Range
Number of Channels
Each channel on an amplifier will power one speaker using a positive and negative cable. There are various types of amplifiers, each designed to power a certain number of speakers. Monoblock amplifiers, also known as single channel, are designed to power one or more subwoofers. These amplifiers often have very high power ratings. On the other hand, multi-channel amplifiers power multiple speakers, usually at lower power ratings. 2-Channel and 4-Channel amplifiers can power car speakers or low powered subwoofers. Occasionally you might see a 5 or 6-channel amplifier that can power speakers and subwoofers at the same time. The most common setup is a monoblock amp to run subwoofers and a 4-channel amp to run door speakers. Check out our Knowledge Base for more information.
Amplifier Key Features
Amplifiers can offer a diverse array of features. If you select more than one feature, then you will view amplifiers that have ALL features selected. These include speaker-level inputs that facilitate seamless integration with factory audio systems, Bluetooth connectivity suitable for ATV/UTV or Classic vehicle setups, built-in DSPs that provide enhanced control over your audio signal, and a host of other functionalities to explore.
Amplifier Class

An amplifier increases the power of the signal being fed to it by taking energy from its power supply and matching the signal but increasing its amplitude. Amplifiers use many different methods for converting these electrical signals and have been categorized into classes.

Class A/B: Greater than 50% of the input signal is amplified while the other percentage is “off”. These amplifiers have a small amount of current flowing through the output transistors all the time which almost eliminates crossover distortion. Class A/B has great sound quality but is not as efficient as class D. These amps are most commonly used to drive speakers.

Class D: Also known as switching amplifiers, class D amps have output transistors that are completely turned “on” or “off”. This means that when the transistors are on, there is almost no voltage across them but when they are off there is significant voltage but no current flowing through it which makes these amplifiers very efficient at the cost of sound quality. These amps are most commonly used to drive subwoofers.

Other Classes: You may see classes such as GH, bD, X, FD, etc. by some manufactures. These amplifiers tend to be either class A/B, D or a hybrid of the two but with improvements to their designs that can make them more efficient or offer better sound quality.
Total RMS Power Output
Total RMS power is measured by multiplying RMS power per channel by the number of channels, and is calculated at the lowest level of operating impedance.

RMS power is the amount of continuous power, measured in watts, that an amplifier produces is called RMS power. The higher the RMS figure, the louder and cleaner your music sounds.

The RMS output figure is much more accurate than the peak rating when comparing products.
Total Peak Power Output
The total peak power output is measured as the wattage per channel multiplied by the number of channels, and is calculated at the lowest level of operating impedance.

It is measured during a brief musical burst, such as a sudden drum accent. Some manufacturers display peak power ratings on the face of their products to increase the appeal.

The RMS power rating is more accurate, and we recommend using it for product comparison.
Series
Many brands group their products into series or lines of products to help customers know the level of quality (good, better, best for example). You can filter by series and the brand using our guided browsing.
Minimum Impedance Unbridged
The lowest impedance the amplifier will handle when it is not bridged.
Minimum Impedance Bridged
The lowest impedance the amplifier will handle when it is bridged.
Remote bass/level controller
If the amp comes with a bass/gain remote you will be able to control the level of your bass from your dashboard. Typically bass remotes also include a 16-20 ft. wire for installation.
Sonic Certified Amplifier
Sonic Certified amplifiers have been tested by the experts at Sonic Electronix to meet or exceed the wattage ratings provided by the manufacturer. If this is marked as Yes, then you can trust the wattage ratings. If marked as No, then we have tested the amplifier and it did not meet the advertised wattage ratings. If marked as Not Tested, then the Sonic Electronix experts have not yet been able to test the amp.
Preamp Outputs
Many amplifiers are equipped with RCA preamp outputs which pass the original music signal from the source to additional amplifiers. This is known as daisy chaining because the source connects to the first amp, and the first amp connects to the second amp, etc. The advantage to daisy chaining is you only need one 2-channel RCA cable to transfer the signal from the head-unit to the amplifier, and then one additional cable for each amp being daisy chained.
Built-in Crossover

A crossover is a type of filtering system that permits only certain frequencies to play. A Low-Pass (LP) crossover allows only frequencies below its setting to get through which is good in the case of some subwoofers. A High-Pass(HP) filter allows frequencies above its setting to pass through, this is normally used on speakers.

When a crossover is set to FULL it means no filtering is added and the full frequency spectrum is allowed through the amplifier. Filtering is important because feeding a speaker frequencies it cannot reproduce effectively creates distortion.

Amp Bluetooth Connectivity
This feature will tell you if the amplifier has the capability to connect to a Bluetooth device.
Deals
Promotions we have offer More Ways to Shop for items that are on clearance, last chance, special offer and sales, Made in America, and more!
Condition

Find compatible amplifiers for subs you own or want with our powerful AmpliFinder® tool.

Match Amps to Subs

Shop the Category

filter-icon Filters & Sort
You are currently viewing discontinued products.

Belva BB200ABv2 Open Box, Accepatble Condition (Used)

Belva BPKG MonoBlock Amp Version 2(Open Box Complete Used Functional)

BB200ABv2 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Belva BB200ABv2 Open Box, Accepatble Condition (Used)

Belva BPKG MonoBlock Amp Version 2(Open Box Complete Used Functional)

• tem Condition - Open Box, Acceptable Condition (Used)
• Class A/B Monoblock Amplifier
• Adjustable Gain Controls
• Low-Pass Filter: 40-300Hz
• Bass Boost: +0-12DB
• One pair of preamp outputs
• Remote bass knob included

• tem Condition - Open Box, Acceptable Condition (Used)
• Class A/B Monoblock Amplifier
• Adjustable Gain Controls
• Low-Pass Filter: 40-300Hz
• Bass Boost: +0-12DB
• One pair of preamp outputs
• Remote bass knob included

Belva BB2000D

2000W Max (1200W RMS) Class AB Monoblock BB Series Car Amplifier

BB2000D big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Belva BB2000D

2000W Max (1200W RMS) Class AB Monoblock BB Series Car Amplifier

• RMS: 540W x 1 @ 4 ohm, 900W x 1 @ 2 ohm, 1200W x 1 @ 1 ohm
• Total Peak Power: 2000W
• 1 Pair of Preamp Outputs
• Bass Boost 0-12 dB at 30-80 Hz
• Subsonic Filter From 20-50 Hz
• Dimensions: 12-1/2"W x 8-1/4"D x 2-1/4"H

35

• RMS: 540W x 1 @ 4 ohm, 900W x 1 @ 2 ohm, 1200W x 1 @ 1 ohm
• Total Peak Power: 2000W
• 1 Pair of Preamp Outputs
• Bass Boost 0-12 dB at 30-80 Hz
• Subsonic Filter From 20-50 Hz
• Dimensions: 12-1/2"W x 8-1/4"D x 2-1/4"H

Belva BB200AB 500 Watt Monoblock

Class A/B Monoblock Amplifier

BB200AB big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Belva BB200AB 500 Watt Monoblock

Class A/B Monoblock Amplifier

• Class A/B Monoblock Amplifier
• Adjustable Gain Controls
• Low-Pass Filter: 40-300Hz
• Bass Boost: +0-12DB
• One pair of preamp outputs
• Remote bass knob included

• Class A/B Monoblock Amplifier
• Adjustable Gain Controls
• Low-Pass Filter: 40-300Hz
• Bass Boost: +0-12DB
• One pair of preamp outputs
• Remote bass knob included

Belva BB2000Dv2 (BB2000D v2) LIKE NEW DAMAGED PACKAGING

2000W Max (1200W RMS) Class D Monoblock BB Series Version 2 Car Amplifier

BB2000Dv2 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Belva BB2000Dv2 (BB2000D v2) LIKE NEW DAMAGED PACKAGING

2000W Max (1200W RMS) Class D Monoblock BB Series Version 2 Car Amplifier

• Like new Damaged Package
• RMS: 540W x 1 @ 4 ohm, 900W x 1 @ 2 ohm, 1200W x 1 @ 1 ohm
• Total Peak Power: 2000W
• 1 Pair of Preamp Outputs
• Bass Boost 0-12 dB at 30 - 80 Hz
• Subsonic Filter From Off - 50 Hz
• Dimensions: 12-1/2"W x 8-1/4"D x 2-1/4"H

• Like new Damaged Package
• RMS: 540W x 1 @ 4 ohm, 900W x 1 @ 2 ohm, 1200W x 1 @ 1 ohm
• Total Peak Power: 2000W
• 1 Pair of Preamp Outputs
• Bass Boost 0-12 dB at 30 - 80 Hz
• Subsonic Filter From Off - 50 Hz
• Dimensions: 12-1/2"W x 8-1/4"D x 2-1/4"H

Belva BB3000Dv2 (BB3000D v2) - Open Box, Very Good Condition (Used)

3000W Max (1800W RMS) Class D Monoblock BB Series Car Amplifier

BB3000Dv2 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Belva BB3000Dv2 (BB3000D v2) - Open Box, Very Good Condition (Used)

3000W Max (1800W RMS) Class D Monoblock BB Series Car Amplifier

• RMS: 780W x 1 @ 4 ohm, 1260W x 1 @ 2 ohm, 1800W x 1 @ 1 ohm
• Total Peak Power: 3000W
• 1 Pair of Preamp Outputs
• Bass Boost 0-12 dB from 30-80 Hz
• Subsonic Filter from 20-50 Hz
• Dimensions: 13-3/4"W x 8-1/4"D x 2-1/4"H

• RMS: 780W x 1 @ 4 ohm, 1260W x 1 @ 2 ohm, 1800W x 1 @ 1 ohm
• Total Peak Power: 3000W
• 1 Pair of Preamp Outputs
• Bass Boost 0-12 dB from 30-80 Hz
• Subsonic Filter from 20-50 Hz
• Dimensions: 13-3/4"W x 8-1/4"D x 2-1/4"H

Belva BB3000D Open Box Complete

3000W Max (1800W RMS) Class AB Monoblock BB Series Car Amplifier

BB3000D big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Belva BB3000D Open Box Complete

3000W Max (1800W RMS) Class AB Monoblock BB Series Car Amplifier

• Item Condition: Open Box Complete
• RMS: 780W x 1 @ 4 ohm, 1260W x 1 @ 2 ohm, 1800W x 1 @ 1 ohm
• Total Peak Power: 3000W
• 1 Pair of Preamp Outputs
• Bass Boost 0-12 dB from 30-80 Hz
• Subsonic Filter from 20-50 Hz
• Dimensions: 13-3/4"W x 8-1/4"D x 2-1/4"H

• Item Condition: Open Box Complete
• RMS: 780W x 1 @ 4 ohm, 1260W x 1 @ 2 ohm, 1800W x 1 @ 1 ohm
• Total Peak Power: 3000W
• 1 Pair of Preamp Outputs
• Bass Boost 0-12 dB from 30-80 Hz
• Subsonic Filter from 20-50 Hz
• Dimensions: 13-3/4"W x 8-1/4"D x 2-1/4"H

Belva BB3000D

3000W Max (1800W RMS) Class AB Monoblock BB Series Car Amplifier

BB3000D big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Belva BB3000D

3000W Max (1800W RMS) Class AB Monoblock BB Series Car Amplifier

• RMS: 780W x 1 @ 4 ohm, 1260W x 1 @ 2 ohm, 1800W x 1 @ 1 ohm
• Total Peak Power: 3000W
• 1 Pair of Preamp Outputs
• Bass Boost 0-12 dB from 30-80 Hz
• Subsonic Filter from 20-50 Hz
• Dimensions: 13-3/4"W x 8-1/4"D x 2-1/4"H

34

• RMS: 780W x 1 @ 4 ohm, 1260W x 1 @ 2 ohm, 1800W x 1 @ 1 ohm
• Total Peak Power: 3000W
• 1 Pair of Preamp Outputs
• Bass Boost 0-12 dB from 30-80 Hz
• Subsonic Filter from 20-50 Hz
• Dimensions: 13-3/4"W x 8-1/4"D x 2-1/4"H

Belva BB2000D - Open Box, Very Good Condition (Used)

2000W Max (1200W RMS) Class AB Monoblock BB Series Car Amplifier

BB2000D big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Belva BB2000D - Open Box, Very Good Condition (Used)

2000W Max (1200W RMS) Class AB Monoblock BB Series Car Amplifier

• RMS: 540W x 1 @ 4 ohm, 900W x 1 @ 2 ohm, 1200W x 1 @ 1 ohm
• Total Peak Power: 2000W
• 1 Pair of Preamp Outputs
• Bass Boost 0-12 dB at 30-80 Hz
• Subsonic Filter From 20-50 Hz
• Dimensions: 12-1/2"W x 8-1/4"D x 2-1/4"H

• RMS: 540W x 1 @ 4 ohm, 900W x 1 @ 2 ohm, 1200W x 1 @ 1 ohm
• Total Peak Power: 2000W
• 1 Pair of Preamp Outputs
• Bass Boost 0-12 dB at 30-80 Hz
• Subsonic Filter From 20-50 Hz
• Dimensions: 12-1/2"W x 8-1/4"D x 2-1/4"H

Belva BB2000Dv2 - Open Box, Acceptable Condition (Used)

2000W Max (1200W RMS) Class D Monoblock BB Series Version 2 Car Amplifier(Open Box Complete Used Functional)

BB2000Dv2 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Belva BB2000Dv2 - Open Box, Acceptable Condition (Used)

2000W Max (1200W RMS) Class D Monoblock BB Series Version 2 Car Amplifier(Open Box Complete Used Functional)

• Item Condition: Open Box, Acceptable, Used
• RMS: 540W x 1 @ 4 ohm, 900W x 1 @ 2 ohm, 1200W x 1 @ 1 ohm
• Total Peak Power: 2000W
• 1 Pair of Preamp Outputs
• Bass Boost 0-12 dB at 30 - 80 Hz
• Subsonic Filter From Off - 50 Hz
• Dimensions: 12-1/2"W x 8-1/4"D x 2-1/4"H

1

• Item Condition: Open Box, Acceptable, Used
• RMS: 540W x 1 @ 4 ohm, 900W x 1 @ 2 ohm, 1200W x 1 @ 1 ohm
• Total Peak Power: 2000W
• 1 Pair of Preamp Outputs
• Bass Boost 0-12 dB at 30 - 80 Hz
• Subsonic Filter From Off - 50 Hz
• Dimensions: 12-1/2"W x 8-1/4"D x 2-1/4"H

Belva BB3000Dv2 Amplifier w/1.0 Farad Capacitor + 2000 Watt Handling Amp Kit

1800W RMS Class D Monoblock BB Series Car Amplifier w/ 1.0 Farad Capacitor & 4 AWG Amp Kit

BB3000Dv2_BB1D_BAK42 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Belva BB3000Dv2 Amplifier w/1.0 Farad Capacitor + 2000 Watt Handling Amp Kit

1800W RMS Class D Monoblock BB Series Car Amplifier w/ 1.0 Farad Capacitor & 4 AWG Amp Kit

• Belva BB3000Dv2 1800W RMS Class D Monoblock BB Series Car Amplifier
• Belva BAK42Complete 4 Gauge 2-Channel Amplifier Installation Kit
• Belva BB1D 1.0 Farad Capacitor
• RMS: 780W x 1 @ 4 ohm
• Premium Power and Ground Wire Provides Optimal Power Transfer

• Belva BB3000Dv2 1800W RMS Class D Monoblock BB Series Car Amplifier
• Belva BAK42Complete 4 Gauge 2-Channel Amplifier Installation Kit
• Belva BB1D 1.0 Farad Capacitor
• RMS: 780W x 1 @ 4 ohm
• Premium Power and Ground Wire Provides Optimal Power Transfer

Belva BB5000D (Factory Refurbished)

3000W RMS Class D Monoblock BB Series Car Amplifier

BB5000D-RB big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Belva BB5000D (Factory Refurbished)

3000W RMS Class D Monoblock BB Series Car Amplifier

• RMS: 1200W x 1 @ 4 ohm, 1800W x 1 @ 2 ohm, 3000W x 1 @ 1 ohm
• Total Peak Power: 5000W
• 1 Pair of Preamp Outputs
• Bass Boost 0-12 dB from 30-80 Hz
• Subsonic Filter from 20-50 Hz
• Dimensions: 20-3/8"W x 8-1/4"D x 2-1/4"H

3

• RMS: 1200W x 1 @ 4 ohm, 1800W x 1 @ 2 ohm, 3000W x 1 @ 1 ohm
• Total Peak Power: 5000W
• 1 Pair of Preamp Outputs
• Bass Boost 0-12 dB from 30-80 Hz
• Subsonic Filter from 20-50 Hz
• Dimensions: 20-3/8"W x 8-1/4"D x 2-1/4"H

Belva BB3000D Open Box

1800W RMS Class D Monoblock BB Series Car Amplifier

BB3000D big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Belva BB3000D Open Box

1800W RMS Class D Monoblock BB Series Car Amplifier

BB Series Monoblock Class D Amplifier • 780W x 1 Chan. @ 4 ohm • 1260W x1 Chan. @ 2 ohm • 1800W x 1 Chan. @ 1 ohm • 3-Way System Protection • Mono Channel Operation • 4 Gauge Power and Ground Inputs • Brushed Metal Design

BB Series Monoblock Class D Amplifier • 780W x 1 Chan. @ 4 ohm • 1260W x1 Chan. @ 2 ohm • 1800W x 1 Chan. @ 1 ohm • 3-Way System Protection • Mono Channel Operation • 4 Gauge Power and Ground Inputs • Brushed Metal Design

EXCLUSIVE

Belva Dual 10" Loaded Enclosure with Crunch Amp and Wiring Kit Package

BBLE210 Dual 10" Loaded Enclosure + PDX-2000.1D Crunch Monoblock Amplifier + BAK42 Complete 4 Gauge Amplifier Wiring Kit

BBLE210_PDX-2000.1D_BAK42 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Belva Dual 10" Loaded Enclosure with Crunch Amp and Wiring Kit Package

BBLE210 Dual 10" Loaded Enclosure + PDX-2000.1D Crunch Monoblock Amplifier + BAK42 Complete 4 Gauge Amplifier Wiring Kit

• Loaded Enclosure with 2 10" Woofers
• Dual 10" Belva Subwoofer Box
• RMS Power Output: 500W Total / 250 Each
• Power One Series Monoblock Class A/B Car Amplifier
• Preamp RCA Outputs
• Complete 4 Gauge 2-Channel Amplifier Installation Kit

• Loaded Enclosure with 2 10" Woofers
• Dual 10" Belva Subwoofer Box
• RMS Power Output: 500W Total / 250 Each
• Power One Series Monoblock Class A/B Car Amplifier
• Preamp RCA Outputs
• Complete 4 Gauge 2-Channel Amplifier Installation Kit

Belva BB3000D (Factory Refurbished)

1800W RMS Class D Monoblock BB Series Car Amplifier

BB3000D big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Belva BB3000D (Factory Refurbished)

1800W RMS Class D Monoblock BB Series Car Amplifier

• RMS: 780W x 1 @ 4 ohm, 1260W x 1 @ 2 ohm, 1800W x 1 @ 1 ohm
• Total Peak Power: 3000W
• 1 Pair of Preamp Outputs
• Bass Boost 0-12 dB from 30-80 Hz
• Subsonic Filter from 20-50 Hz
• Dimensions: 13-3/4"W x 8-1/4"D x 2-1/4"H

• RMS: 780W x 1 @ 4 ohm, 1260W x 1 @ 2 ohm, 1800W x 1 @ 1 ohm
• Total Peak Power: 3000W
• 1 Pair of Preamp Outputs
• Bass Boost 0-12 dB from 30-80 Hz
• Subsonic Filter from 20-50 Hz
• Dimensions: 13-3/4"W x 8-1/4"D x 2-1/4"H

Belva BB5000D

5000W (3000W RMS) Class D Monoblock BB Series Car Amplifier

BB5000D big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Belva BB5000D

5000W (3000W RMS) Class D Monoblock BB Series Car Amplifier

• RMS: 1200W x 1 @ 4 ohm, 1800W x 1 @ 2 ohm, 3000W x 1 @ 1 ohm
• Total Peak Power: 5000W
• 1 Pair of Preamp Outputs
• Bass Boost 0-12 dB from 30-80 Hz
• Subsonic Filter from 20-50 Hz
• Dimensions: 20-3/8"W x 8-1/4"D x 2-1/4"H

47

• RMS: 1200W x 1 @ 4 ohm, 1800W x 1 @ 2 ohm, 3000W x 1 @ 1 ohm
• Total Peak Power: 5000W
• 1 Pair of Preamp Outputs
• Bass Boost 0-12 dB from 30-80 Hz
• Subsonic Filter from 20-50 Hz
• Dimensions: 20-3/8"W x 8-1/4"D x 2-1/4"H

Belva BB200AB - Open Box, Acceptable Condition (Used)

Belva BPKG MonoBlock Amp

BB200AB big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Belva BB200AB - Open Box, Acceptable Condition (Used)

Belva BPKG MonoBlock Amp

Belva BB5000D (OPEN BOX COMPLETE)

3000W RMS Class D Monoblock BB Series Car Amplifier

BB5000D big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Belva BB5000D (OPEN BOX COMPLETE)

3000W RMS Class D Monoblock BB Series Car Amplifier

• RMS: 1200W x 1 @ 4 ohm, 1800W x 1 @ 2 ohm, 3000W x 1 @ 1 ohm
• Total Peak Power: 5000W
• 1 Pair of Preamp Outputs
• Bass Boost 0-12 dB from 30-80 Hz
• Subsonic Filter from 20-50 Hz
• Dimensions: 20-3/8"W x 8-1/4"D x 2-1/4"H

• RMS: 1200W x 1 @ 4 ohm, 1800W x 1 @ 2 ohm, 3000W x 1 @ 1 ohm
• Total Peak Power: 5000W
• 1 Pair of Preamp Outputs
• Bass Boost 0-12 dB from 30-80 Hz
• Subsonic Filter from 20-50 Hz
• Dimensions: 20-3/8"W x 8-1/4"D x 2-1/4"H

Belva BB5000D-open box complete

3000W RMS Class D Monoblock BB Series Car Amplifier

BB5000D big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Belva BB5000D-open box complete

3000W RMS Class D Monoblock BB Series Car Amplifier

• RMS: 1200W x 1 @ 4 ohm, 1800W x 1 @ 2 ohm, 3000W x 1 @ 1 ohm
• Total Peak Power: 5000W
• 1 Pair of Preamp Outputs
• Bass Boost 0-12 dB from 30-80 Hz
• Subsonic Filter from 20-50 Hz
• Dimensions: 20-3/8"W x 8-1/4"D x 2-1/4"H

• RMS: 1200W x 1 @ 4 ohm, 1800W x 1 @ 2 ohm, 3000W x 1 @ 1 ohm
• Total Peak Power: 5000W
• 1 Pair of Preamp Outputs
• Bass Boost 0-12 dB from 30-80 Hz
• Subsonic Filter from 20-50 Hz
• Dimensions: 20-3/8"W x 8-1/4"D x 2-1/4"H

Belva BB200ABv2 Open Box Missing (Good, Used)

Class A/B Monoblock Replacement Amp for Bass Packages (BPKG110v2, BPKG112v2, BPKG210v2, BPKG212v2) Open Box Missing (Good, Used)

BB200ABv2 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Belva BB200ABv2 Open Box Missing (Good, Used)

Class A/B Monoblock Replacement Amp for Bass Packages (BPKG110v2, BPKG112v2, BPKG210v2, BPKG212v2) Open Box Missing (Good, Used)

• FEATURE 1
• FEATURE 2
• FEATURE 3
• FEATURE 4
• FEATURE 5
• FEATURE 6
• FEATURE 7

• FEATURE 1
• FEATURE 2
• FEATURE 3
• FEATURE 4
• FEATURE 5
• FEATURE 6
• FEATURE 7

Belva BB5000Dv2 Open Open Box (Good, Used)

5000W Max (3000W RMS) Class D Monoblock BB Series Car Amplifier Open Box Complete (Good, Used)

BB5000Dv2 big DISCONTINUED
Go to item page Right Arrow Icon of Right Arrow

Belva BB5000Dv2 Open Open Box (Good, Used)

5000W Max (3000W RMS) Class D Monoblock BB Series Car Amplifier Open Box Complete (Good, Used)

• Item Condition - Good, Used
• RMS: 1200W x 1 @ 4 ohm, 1800W x 1 @ 2 ohm, 3000W x 1 @ 1 ohm
• Total Peak Power: 5000W
• 1 Pair of Preamp Outputs
• Bass Boost 0-12 dB from 30-80 Hz
• Subsonic Filter from 20-50 Hz
• Dimensions: 20-3/8"W x 8-1/4"D x 2-1/4"H

• Item Condition - Good, Used
• RMS: 1200W x 1 @ 4 ohm, 1800W x 1 @ 2 ohm, 3000W x 1 @ 1 ohm
• Total Peak Power: 5000W
• 1 Pair of Preamp Outputs
• Bass Boost 0-12 dB from 30-80 Hz
• Subsonic Filter from 20-50 Hz
• Dimensions: 20-3/8"W x 8-1/4"D x 2-1/4"H

1 2 Next

Items per page: 20 40 60

    Clear all

    Belva Monoblock Amplifiers Information

    The Belva monoblock amplifiers are designed for efficient power output. These amps take up little space and feature high quality platinum finished connections, and solid power ratings. You won't be disappointed with your Belva monoblock amplifier for your vehicle's needs.
    why-shoping-with-sonic

    We love people and we're ready to help you! See what separates us from our competition.

    Take advantage of our VIP rewards like 10% back on your purchases, free 2-day shipping, extended warranties, and free returns! Gain access to all of these rewards without any membership fees.
    Get great discounted (and possibly FREE) installation accessories with most car stereo purchases. This includes dash kits, wiring harnesses and antenna adapters that you will need to properly install your new car stereo.
    We are an Authorized Dealer for all the brands we sell, including the most premium brands in car and marine audio such as Hertz, JL Audio, NVX, Rockford Fosgate, Kicker, Alpine, Kenwood and many more.
    Shop Deals and get up to 30% off premium brands! Shop Now! We are always looking out for the best products and deals to offer our customers. Don’t pay too much by shopping elsewhere!
    We have information on brands, gear, and more for you to explore! Check out our YouTube Channel for helpful how-to videos, product reviews, and Q&As. For a more detailed look, also visit our Learning Center!
    Our trained experts are here to assist you! They are just a phone call or click away to help you get the right gear for you and your vehicle!
    Why Shop With Us?
    Save up to 10 different vehicles in your garage
    Vehicle
    Store     Delete

    2018 Lexus GS300

    1989 Dodge Colt

    1989 Ford Escort

    2002 Mazda B3000

    2024 Audi Q7

    1997 Subaru Impreza

    2015 Nissan Juke

    2008 GMC Canyon

    2022 Audi A7 Sportback

    2016 Acura MDX

    Add vehicle Clear all vehicles
    Where to find vehicle info
    Are you sure you want to clear your garage?
    This action cannot be undone. Confirm

    Cancel

    This category was not designed for products.
    If you continue, you will be redirected to a category customized for your vehicle. Continue

    Cancel

    Shop your 2018 GS300
    Why Use a Vehicle Fit Guide?
    Change vehicle | Shop without vehicle
    Whoa! Slow down. Add your details below!
    additional information required
    Add vehicle details to confirm fitment
    Ignore fitment details
    Find stereos and more that work -- fast.

    Additional information:

    Remove

    Can't find your vehicle? Click here and we'll help.

    Where to find vehicle info

    Go to Fitment

    Didn't find your car?

    Submit your details and we'll help!
    Please enter the letters as they are shown in the image above. Letters are not case-sensitive.
    Identify your vehicle and submodel details
    • Owner's manual
    • Vehicle's insurance card
    • Vehicle registration
    • Vehicle produced after 2005: Inside driver's side door
    • Vehicle produced before 2005: Rear passenger doorjamb, glove box, center console, or engine compartment
    Car Info Side Door Icon
    Vehicle Registration Icon
    Vehicle Insurance Icon
    Back

    Modern vehicles often require specific brackets, wiring harnesses, and mounting solutions. A fit guide ensures:

    • You see only parts engineered for your exact vehicle
    • You avoid incompatible radios, speakers, or wiring
    • Installation is smoother, faster, and frustration-free
    • You get the correct accessories the first time

    Whether you're replacing a factory stereo or upgrading your entire audio system, the Fit Finder eliminates uncertainty.

    Back
    Track your order
    Call our experts
    Support Center
    Return & Exchanges
    Follow on Instagram Instagram logo
    Subscribe on YouTube YouTube logo