Discontinued 2-Channel Amplifiers

360W RMS 2 channel Xstream Series • 180W x 2 channel power output at 2 ohm • 90W x 2 channel at 4 ohm • Bass EQ Control • Drive Delay II • Selectable X-Over HPF / Full / LPF

4 ohm: 60 watts x 2 • 2 ohm: 125 watts x 2 • Bridged, 4 ohm: 250 watts x 1 • CEA-2006 Compliant • Focused mass heatsink design • S/N ratio: >80 dB • Frequency Response: 20 Hz - 20 kHz

• RMS: 75W x 2 @ 4 ohm, 150W x 2 @ 2 ohm, Bridged 300W x 1 @ 4 ohm
• Total Peak Power: 600W
• High Speed MOSFET Power Supply
• Silver Pate Connectors
• Heavy Duty Aluminum Heat Sink
• 8.00" W x 9.10" L x 2.00" H

2 Channel Amplifier • 200W RMS X 4 @ 2 • RCA Outputs • Built-In Crossover • Bass Remote Included • Hifonics Generation Heatsink Design

• 130 Watts RMS x 2 @ 4 ohm
• 200 Watts RMS x 2 @ 2 ohm
• 400 Watts RMS x 1 @ 4 ohm Bridged
• Total Peak Power: 800 Watts
• Variable high-pass filter: 20 - 4500 Hz, 12 dB/octave
• Variable low-pass filter: 50 - 4500 Hz, 12 dB/octave
• Variable Bass Boost: 0 to +12 dB bass boost
• Dimensions: 5"W x 11.50"L x 5"H

40W x 4 RMS • Tri Mode Operation • Bass Boost

• Max Power Output: 500 watts x 2 Channel @ 4 ohm
• Variable Bass Boost
• Soft Start Turn-On
• Gain Adjustment
•

APX Series 2-Channel Class AB Car Amplifier • 60W x 2 chan. @ 4 ohm • 80W x 2 chan. @ 2 ohm • 160W x 1 chan. @ 4 ohm • 100W x 2 chan. Max • MOSFET power supply • Speaker-level inputs • Gold-plated connectors

Auto Sound 2-Channel Class A/B Car Amplifier • 75 Watts x 2 Chan. @ 4 Ohm • 150 Watts x 2 Chan. @ 2 Ohm • 600 Watts Max • 3-Way System Protection Circuitry • LED Power And Protect Indicators • MOSFET Power Supply

• 625 Watts Peak x 2 @ 4 ohm
• 1250 Watts Peak x 2 @ 2 ohm
• 2500 Watts Peak x 1 @ 4 ohm, Bridged
• Total Peak Power: 2500 Watts
• Built-In High and Low Pass Filters
• Heavy Duty Aluminum Heatsink
• Dimensions: 10.75" W x 10.25" L x 2" H

Cobalt 2-Channel Class A/B Car Amplifier • 60 Watts x 2 Chan. @ 4 Ohm • 80 Watts x 2 Chan. @ 2 Ohm • 300 Watts Max • Tri-Mode Capable • High-Level Inputs • Selectable Bass Boost • LED Power/Protect Indicators

• 240W x 2 Chan. @ 4 ohm
• 800W x 1 Chan. @ 4 ohm
• 3-Way System Protection
• 2/1 Channel Operation
• 4 Gauge Power and Ground Inputs
• 2 Ohm Stable Stereo Operation with Power Output Increase

• 4 ohm: 200 watts x 2
• 2 ohm: 300 watts x 2
• Bridged, 4 ohm: 600 watts x 1
• CEA-2006 compliant
• Optional remote bass/treble boost
• S/N ratio: 85 dB
• Frequency Response: 20 Hz - 20 kHz

• RMS Power: 450W x 2 @ 4 ohm, 900W x 2 @ 2 ohm, 1800 x 1 @ 4 ohm Mono Bridged
• Total Peak Power: 1800W
• Variable Bass Boost
• Speaker Level Inputs
• 9.05"W x 12.36"L x 2.29"H

• 250 Watts RMS x 2 @ 4 ohm
• 500 Watts RMS x 2 @ 2 ohm
• 1000 Watts RMS x 1 Bridged @ 4 ohm
• Total Peak Power: 1000 Watts
• Speaker-level (high-level) inputs
• Variable high-pass filter: 120 - 3000 Hz
• Variable low-pass filter: 50 - 250 Hz
• Variable Bass Boost: 0 to +12 dB bass boost

Thunder Series 2-Channel Class AB Car Amplifier • 75W x 2 chan. @ 4 ohm • 150W x 2 chan. @ 2 ohm • 300W x 2 chan. Max • Semi Unregulated MOSFET • Speaker-level inputs with signal sensing for automatic turn-on • MTX Prizm EFX™

PowerZone Series 2-Channel Class AB Car Amplifier • 100W x 2 chan. @ 4 ohm • 200W x 2 chan. @ 2 ohm • 400W x 1 chan. Max • MOSFET power supply • Stereo / Mono Amplifier Mode Switch • Silver-coated RCA level inputs

• 875 Watts Max x 2 @ 4 ohm
• 1750 Watts Max x 2 @ 2 ohm
• 3500 Watts Max x 1 @ 4 ohm, bridged
• Total Peak Power: 3500 Watts
• Built-in Low- and High-Pass Filters
• 0/+6/+12 Bass Boost
• Aluminum Heatsink
• Dimensions: 12.75" W x 10.25" L x 2" H

2/1 Channel operation • 225W Peak / 100W RMS x 2 channel (4 ohm) high power amplifier • 600W Peak / 340W RMS x 1 channel Bridged Power • adjustable low-pass crossover • preamp outputs • MOSFET power supply • Bass EQ Circuit • STAR circuitry • bass engine

SPL DK2-2000 2000W Max Phantom Series 2-Channel Amplifier • 4 ohm: 370 watts x 2 chan. • 2 ohm: 440 watts x 2 chan. • Bridged, @ 4 ohm: 880 watts x 1 chan.

2-Channel Class AB Car Amplifier • 60W x 2 chan. @ 4 ohm • 150 • 300W x 2 chan. Max • MOSFET Power supply • Tuned Bass EQ (0-18 dB bass boost at 45 Hz) • Bridgeable operation • Preamp RCA outputs • Auto-reset thermal, short-circuit, and low impedance protection circuitry

Series II 1600 W 2-Channel Amplifier • 310W x 2 chan. @ 4 Ohm • 370W x 2 chan. @ 2 Ohm • MOSFET power supply • preamp inputs and outputs

DTS Series 2-Channel Class A/B Car Amplifier • 400W Dynamic • 2-Way System Protection • Brushed Aluminum Alloy Convection Cooled Heatsink • Variable High/Low-Pass Filter • Selectable Bass Boost

• 800 Watts RMS x 2 @ 4 ohm
•1600 Watts RMS x 2 @ 2 ohm
• Total Peak Power: 3200 Watts
• Class-AB Full Range 2-Channel Amplifier
• High-density split-dome convection heat-sink for extreme heat dissipation
• 8.97"W x 14.17"L x 2.41"H

2-Channel Class AB Car Amplifier • 50W x 2 chan. @ 4 ohm • 75W x 2 chan. @ 4 ohm • PWM MOSFET Power supply • Tuned Bass EQ (0-12 dB bass boost) • Speaker short circuit protection • Extruded aluminum heatsink

• 4 ohm: 150 watts x 2 chan.
• 2 ohm: 300 watts x 2 chan.
• Bridged, 4 ohm: 600 watts x 1 chan.
• Pulse Width Modulated MOSFET Power Supply
• 2/1 Channel Operation

X Thunder Series 2-Channel Class AB Car Amplifier • 50W x 2 chan. @ 4 ohm • 75W x 2 chan. @ 2 ohm • Stereo gain control • Heavy duty aluminum construction with large heat-sinks

550W Punch Series 2-Channel Amplifier • 150W x 2 chan. @ 4 Ohm • 275W x 2 chan. @ 2 Ohm • mass heatsink design • specially designed MOSFETs • preamp inputs and outputs • CEA-2006 compliant

• RMS: 4 ohm: 65 Watts x 2 chan.
• RMS: 2 ohm: 90 Watts x 2 chan.
• Total Peak Power: 400 Watts
• Speaker-level (high-level) inputs
• low and high pass filter
• Frequency Response: 5 - 50,000 Hz

Power Reference Series 2-Channel Class AB Car Amplifier • 75W x 2 chan. @ 4 ohm • 100W x 2 chan. @ 2 ohm • 200W Max x 1 chan. Bridged • LED power and protection indicators • Bridgeable operation

1000 watts, 2-channel amplifier • Ultra slim 1-1/4" height • Blue light illumination • Tri-mode capable • Remote bass control • 2 ohm stereo stable, 4 ohm momo

1200 watts 2-channel Gothic Series car amplifier • 300 watts RMS x 2 chan @ 2 ohm • 250 watts RMS x 2 chan. @ 4 ohm • Bridgeable • S/N Ratio: >97 dB

• 4 ohm: 25 watts x 2 chan.
• 2 ohm: 50 watts x 2 chan.
• Bridged, 4 ohm: 100 watts x 1 chan
• Uses the vehicle’s charging system as power supply for 90-percent efficiency

• ZX Series 2-Channel Class AB Car Amplifier
• 150W x 2 chan. @ 4 ohm
• 225W x 2 chan. @ 2 ohm
• 450W x 1 chan. @ 4 ohm
• Tuned Bass EQ
• Balanced differential inputs
• Low-Pass & High-Pass Filters

800 watts, 2-channel amplifier • Ultra slim 1-1/4" height • Blue light illumination • Tri-mode capable • Remote bass control • 2 ohm stereo stable, 4 ohm momo

MTX Audio 2-Channel Amplifier • MOSFET Power Supply • Thermal and Overload protection • High and Low Level Input • 3) 35 amp Fuses • High-Pass and Low-Pass Crossover • 100mV-10V Stereo Gain Control • 0 - 12dB Bass Boost • Fan Cooled

• 1200 Watts Max
• 600 Watts x 2 Chan. @ 2 Ohm
• 4-Way System Protection
• Selectable Highpass/Lowpass Filters

1200W 2-Channel Amplifier • Built-in Full/HP/LP Crossovers • Bass Remote Control Included • PWM MOSFET Power Supply • Selectable Bass Boost • 2-Way System Protection Circuitry

CEA compliant • 600 watts RMS x 1 at 4 ohm • 4-ohm stable in bridged mode • MOSFET power supplies and output stages • MEHSA transfers heat efficiently from the MOSFET devices to the heat sink for high performance • TOPAZ eliminates ground loop noise • variable Punch Bass boost (0-18 dB at 45 Hz) with remote

• 125 Watts Peak x 2 @ 4 ohm
• 250 Watts Peak x 2 @ 2 ohm
• Total Peak Power: 500 Watts
• Low-Pass Filter and High-Pass Filter
• Variable Bass Boost
• Aluminum Heatsink
• 11.4" W x 10" L x 2.4" H

• 600W Max, FX Series 2-Channel Amplifier • 4 ohm: 95 watts x 2 chan • 2 ohm: 120 watts x 2 chan • Bridged, @ 4 ohm: 240 watts x 1 chan • S/N Ratio: 98dB •THD: 0.02%

DTX Series 2-Channel Class AB Amplifier • 60W x 2 Chan. @ 4 ohm • 80W x 2 Chan. @ 2 ohm • 4-Way System Protection • 2/1 Channel Operation • 8 Gauge Power and Ground Inputs • Variable Bass Boost (0-12 dB)

• 4 ohm: 400 watts x 2 chan.
• 2 ohm: 800 watts x 2 chan.
• Bridged, 4 ohm: 1600 watts x 1 chan.
• SEPP Class A/B Analog Amplifier

• 250 Watts Peak x 2 @ 4 ohm
• 500 Watts Peak x 2 @ 2 ohm
• 1000 Watts Peak x 1 @ 4 ohm, Bridged
• Total Peak Power: 1000 Watts
• High and Low Pass Filters
• 0/6/12 dB Bass Boost
• Heavy Duty Aluminum Heatsink
• 10.38" W x 10.25" L x 2" H

DX Series 2-Channel Class D Car Amplifier • 50 Watts x 2-Channel @ 2 Ohm • 25 Watts x 2-Channel @ 4 Ohm • 100 Watts x 1-Channel @ 4 Ohm • Muting Circuit • 3 Automatic Turn-On Modes • Balanced Differential Inputs

2-Channel Class AB Car Amplifier • 200W x 2 chan. @ 4 ohm • 600W x 2 chan. • MOSFET Power Supply • LED power and protection indicators • 1/2 channel operation • Gold-plated RCA level inputs • Gold-plated screw terminals

180 watts peak • 60W RMS x 2 chan. • 175W RMS x 1 chan. • High current, high efficiency MOSFET power supply • "Easy Tune" top-mounted controls

Punch Series 2-Channel Amplifier • 80W x 2 chan. @ 4 Ohm • 160W x 2 chan. @ 2 Ohm • focused mass heatsink design • special-design TO-247 MOSFETs • top mounted LED indicators • thermal sensing

300 Watt 2 Channel Amplifier

ZX Series 2-Channel Class AB Car Amplifier • 25W x 2 chan. @ 4 ohm • 50W x 2 chan. @ 2 ohm • 100W x 1 chan. @ 4 ohm • 100W x 2 chan. Max • Balanced differential inputs make KICKER ZX Amplifiers compatible with any factory radios

2 Channel Bridgeable MOSFET Power Amplifier • V-flex double bump suspension • 1600 watts Total Power • Bass Remote Control • Gold Plated RCA Jacks

• 400W x 2 Chan. @ 4 ohm
• 800W x 2 Chan. @ 2 ohm
• 1600W x 1 Chan. @ 4 ohm
• 3-Way System Protection
• 2/1 Channel Operation
• 2 Gauge Power and Ground Inputs
• Illuminated Logo for Stylish and Unique Design

• 125 Watts RMS x 2 @ 4 ohm
• 250 Watts RMS x 2 @ 2 ohm
• 500 Watts RMS x 1 @ 4 ohm, Bridged
• Mono or 2-Channel Operation
• CEA-2006 Compliant
• Signal to Noise Ration: 105 dBA
• Selectable crossover modes: FULL / HPF / LPF
• Dimensions: 6-3/4" W x 8-1/4" L x 1-13/16" H

MAX Series 2-Channel Class AB Car Amplifier • 1000W x 2 chan. @ 4 ohm • 1650W x 2 chan. @ 2 ohm • 4000W x 1 chan. Max • MOSFET power supply • Anti-Thump Turn-On • Variable Phase Shift Control

1500W 2-Channel Amplifier • Built-in Full/HP/LP Crossovers • Bass Remote Control Included • PWM MOSFET Power Supply • Selectable Bass Boost • 2-Way System Protection Circuitry

• Max Power: 275W x 2 @ 4 ohm, 550W x 2 @ 2 ohm
• Total Peak Power: 1100W
• Fully Adjustable Pro-Design Crossovers
• Dimensions: 9.72" W x 7.09" L x 2.28" H

• 60W x 2 chan. @ 4 ohm
• 80W x 2 chan. @ 2 ohm
• 160W x 1 chan. @ 4 ohm
• 160W x 2 chan. Max
• MOSFET power supply
• Preamp RCA outputs
• Thermal, voltage, and short protection circuitry

ADF Series 2-Channel Class AB Car Amplifier • 100W x 2 chan. @ 4 ohm • 150W x 2 chan. @ 2 ohm • 300W x 1 chan. @ 4 ohm • 600W x 2 chan. Max • MOSFET power supply • Oversized capacitor tanks • Preamp RCA outputs

1000W 2-Channel Amplifier • Built-in Full/HP/LP Crossovers • Bass Remote Control Included • PWM MOSFET Power Supply • Selectable Bass Boost • 2-Way System Protection Circuitry