Discontinued 2-Channel Amplifiers

• 900W Peak
• 450W RMS
• Titanium deposit Impregnated Cone Woofer with Rolled Outer Edge
• Santoprene Rubber Surround
• Highly-Efficient UniPlate™ Pole-Piece and Back Plate
• 125 Watts RMS x 2 @ 4 ohm
• 250 Watts RMS x 2 @ 2 ohm
• 500 Watts RMS x 1 @ 4 ohm, Bridged
• Mono or 2-Channel Operation
• CEA-2006 Compliant
• Signal to Noise Ration: 105 dBA
• Selectable crossover modes: FULL / HPF / LPF

XA Series 2-Channel Car Amplifier • 60W RMS x 2 Chan. @ 4 Ohm • 85W RMS x 2 Chan. @ 2 Ohm • 160W RMS x 1 Chan. @ 4 Ohm Bridged • MOSFET Power Supply • Variable Bass Boost • Variable High Pass • Variable Low Pass

• RMS: 4 ohm: 139 watts x 2 chan., 2 ohm: 203 watts x 2 chan., Bridged, 4 ohm: 250 watts x 1 chan.
• Total Peak Power: 1200W
• Signal to Noise Ratio: >80 dB
• Frequency Response: 10 - 20,000 Hz
• 2 or Mono channel operation
• 6.49 W x 7.91 L x 2.20 H

600 watt 2-Channel Class-A/B Amplifier • 150W RMS x 2 @ 2 Ohm • Built-In Crossover • Adjustable Input Gain • Large Gold-Plated Terminals

2-Channel, 520W Amplifier • 130W RMS x 2 @ 4 ohm • 350W RMS x 1 @ 4 ohm bridged • Bass Boost • 2 RCA Inputs, 2 RCA Outputs • 2 Ohm Stable

• 200W RMS x 2 Chan. @ 4 ohm
• Max 1000W x 2 Chan. @ 2 ohm
• Max 2000W x 1 Chan. @ 4 ohm
• 2-Way System Protection
• 2/1 Channel Operation
• 8 Gauge Power and Ground Inputs
• Silver Anodized Heatsink

Full Range 2-Channel Class A/B Car Amplifier • 360W • Dual N-Channel MOSFET output stage • Speaker-level inputs • Preamp RCA outputs • Variable low/high-pass filter • Adjustable input sensitivity

Tarantula Series 2-Channel Class A/B Car Amplifier • 175W x 2 Chan. @ 2 Ohm • 110W x 2 Chan. @ 4 Ohm • Double Side PCB And SMD Components • Remote Bass Level Input • Active X-Over • 3-Way System Protection Circuitry

250W RMS x 2 chan at 4 ohm • 1000W RMS x 1 chan in bridged mode • 500W RMS x 2 chan at 2 ohm • Bass Remote Included • 2 ohm stereo stable

• 500 Watts RMS x 2 @ 4 ohm
• 1000 Watts RMS x 2 @ 2 ohm
• 2000 Watts RMS x 1 @ 4 ohm Bridged
• Total Peak Power: 4000 Watts
• Variable high-pass filter: 60 - 1200 Hz
• Variable low-pass filter: 30 - 250 Hz
• Variable Bass Boost: 0 to +9 dB bass boost
• Dimensions: 11.4"W x 20"L x 3.8"H

2-Channel High Current Amplifier • 175W x 2 @ 2 Ohm • 100 x 2 @ 4 Ohm • 500W x 1 @ 2 Ohm (Bridged) • Built-In Crossover • DPS • Q-Tune

2-Channel Class AB ATX Series Car Amplifier • PWM MOSFET Power Supply • Bass Boost • Soft Start Turn-On • High Level Inputs • Preamp RCA Outputs • 4-Way System Protection Circuitry • Flat Panel Heatsink Design • Subsonic Filter

2 channel audio amplifier • 50 watts x 2 chan. @ 4 ohm • 75 watts x 2 chan. @ 2 ohm • Continuous variable High-Pass and Low-Pass crossover settings • Continuous variable bass boost settings • 0 - 12dB Bass boost • RCA Inputs

• 500W Max x 2 Channels
• 1000W Max x 1 Channel Bridged @ 4 ohm
• Variable Electronic Crossovers
• Variable Bass Boost
• High/Low Level Inputs
• RCA Preamp Output

Gothic Series 2-Channel Car Amplifier • 150W x 2 Chan. @ 4 Ohm • 180W x 2 Chan. @ 2 Ohm • Bridged 350W x 1 Chan. @ 4 Ohm • Pulse Width Modulation Circuitry • Tri-Mode Capable • LED Power Indicators • Level Inputs

Power One Series 2-Channel Class A/B Car Amplifier • 600W Max • 150W x 2-Chan @ 2 Ohm • SEPP Analog Amplifier • Variable Bass Boost • Speaker-Level Inputs • Preamp RCA Outputs • Included 4 AWG Amplifier Kit

• 480W Max
• MOSFET Power Supply
• LED Power/Protect Indicators
• Ultimate Mounting Flexibility
• Mill Spec Double Sided PCB with SMD Parts

SPL DK2-1500 1500W Max, Phantom Series 2-Channel Amplifier • 4 ohm: 300 watts x 2 chan. • 2 ohm: 380 watts x 2 chan. • Bridged, @ 4 ohm: 760 watts x 1 chan. • Full Mosfet Power Supply

• RMS: 4 ohm: 75 watts x 2 chan., 2 ohm: 110 watts x 2 chan., Bridged, 4 ohm: 150 watts x 1 chan.
• Total Peak Power: 1000W
• Signal to Noise Ratio: >80 dB
• Frequency Response: 10 - 20,000 Hz
• 2 or Mono channel operation
• 6.49 W x 6.88L x 2.20 H

• 1800W Max, FX Series 2-Channel • 4 ohm: 300 watts x 2 chan • 2 ohm: 380 watts x 2 chan • Bridged, @ 4 ohm: 760 watts x 1 chan • S/N Ratio: 98dB • THD: 0.02%

• 2600W Max, FX Series 2-Channel Amplifier • 4 ohm: 450 watts x 2 chan • 2 ohm: 540 watts x 2 chan • Bridged, @ 4 ohm: 1080 watts x 1 chan • S/N Ratio: 98dB • THD: 0.02%

• 250 Watts RMS x 2 @ 4 ohm
• 500 Watts RMS x 2 @ 2 ohm
• 1,000 Watts RMS x 1 @ 4 ohm, bridged
• Total RMS Power: 1,000 Watts
• Built-in High and Low Pass Filters
• Heavy Duty Aluminum Alloy Heatsink
• NVX VUBT2 Universal Waterproof Bluetooth Receiver for Cars/Motorcycles/ATVs/Boats

Picasso Series 2-Channel Class AB Car Amplifier • 220W x 2 Chan. @ 4 ohm • 350W x 2 chan. @ 2 ohm • 700 Watts Total • Bi-linear selectable • Tuned Bass EQ • Platinum-Plated Contacts • End Caps Included

3000W 2-Channel Amplifier • Built-in Full/HP/LP Crossovers • Bass Remote Control Included • PWM MOSFET Power Supply • Selectable Bass Boost • 2-Way System Protection Circuitry

• RMS: 90W x 2 @ 4 ohm, 135W x 2 @ 2 ohm, 270W x 1 @ 4 ohm Bridged
• Total Peak Power: 600W
• High Speed MosFET Power Supply
• 16V Capable Power Supplies
• Full Range Class A/B
• BiPolar Professional Audio Grade Output Transistors
• 12.1" L x 7.9" W x 2.4 H

40W x 2 RMS • Tri Mode Operation • Bass Boost

• 113 Watts RMS x 2 @ 4 ohm
• 225 Watts RMS x 2 @ 2 ohm
• 450 Watts RMS x 1 @ 4 ohm Bridged
• Total Peak Power: 600 Watts
• Variable low-pass filter: 50 - 250 Hz
• Fixed high-pass filter: 200 Hz
• Variable Bass Boost: 0 to +18 dB bass boost
• Dimensions: 10"W x 9.5"L x 2"H

** FREE GROUND SHIPPING AND 8 GAUGE AMPLIFIER KIT WITH PURCHASE **
150 watts RMS x 2 at 2 ohm • 100 watts RMS x 2 at 4 ohm • Full MOSFET Circuitry • Thermal/Short/Overload Protection Circuitry

880W RMS 2 channel Xstream Series • 440W x 2 channel power output at 2 ohm • 220W x 2 channel at 4 ohm • Bass EQ Control • Drive Delay II • Selectable X-Over HPF / Full / LPF

340 watts RMS x 1 bridged • Bass Engine® with variable high-pass/low-pass crossover and tuned Bass EQ

820 watts 2-channel Gothic Series car amplifier • 230 watts RMS x 2 chan @ 2 ohm • 180 watts RMS x 2 chan. @ 4 ohm • Bridgeable • S/N Ratio: >97 dB

Ground Pounder Series Amplifier • 2-Channel • 175W x2 Chan @ 4 ohm • 350W x2 Chan @ 2 ohm • 700 Watts Max • Full Range Line Output • High Level Inputs • Illuminated Crunch Badge • Unbalanced Input RCA Jack •

Titan TXi Series 2-Channel Class AB Car Amplifier • 150W x 2 chan. @ 4 ohm • 300W x 2 chan. @ 2 ohm • 600W x 1 chan. @ 4 ohm • Pulse width modulated (PWM) MOSFET power supply • Preamp RCA outputs

2 Channel Bridgeable MOSFET Power Amplifier • V-flex double bump suspension • 1000 watts Total Power • Bass Remote Control • Gold Plated RCA Jacks

• 420W Max, FX Series 2-Channel • 4 ohm: 80 watts x 2 chan • 2 ohm: 95 watts x 2 chan • Bridged, @ 4 ohm: 190 watts x 1 chan • S/N Ratio: 98dB • THD: 0.02%

• RMS: 500W x 2 @ 4 ohm, 1000W x 2 @ 2 ohm, Bridged: 2000W x 1 @ 4 ohm
• Total Peak Power: 2000W
• Pro- Fi High Speed MOSFETs
• Auto-Step PWM MOSFET Power Supply
• ROAD WORTHYTM TCID
• 4/2 channel operation

2-Channel Amplifier • 1000 watts and CEA-2006 Compliant • 2-Ohm Stereo Stable • Built-in Infrasonic Filter • 3 (2-speed) fans • MOSFET power supply • Large secondary capacitors

ZX Series 2-Channel Class AB Car Amplifier • 205W x 2 chan. @ 4 ohm • 275W x 2 chan. @ 2 ohm • 550W x 1 chan. @ 4 ohm • 550W x 2 chan. Max • Balanced differential inputs make KICKER ZX Amplifiers compatible with any factory radios

2-Channel Picasso Series Amplifier • 80W RMS x 2 @ 4 • 260W RMS Bridged • High & Low Inputs • Line Out • PWM MOSFET Circutry • Tri-Guard • Tri-Mode Operation • Phase Inversion Switch

Chaos Exxtreme Series 2-Channel Class AB Car Amplifier • 110W x 2 chan. @ 4 ohm • 300W x 2 chan. Max • Pulse width modulated (PWM) MOSFET power supply • Speaker-level inputs • Soft power-on/off

2 Channel bridgeable high power amplifier • 175W X 2 @ 2 Ohm • 125W X 2 @ 4 Ohm • 350W X 1 chan. Bridged • Variable bass boost 0-18dB • Fully variable crossover control • Wired bass remote control • Regulated MOSFET power supply

• 2-Channel XR Series Car Amplifier
• 4 ohm: 65 watts x 2 chan.
• 2 ohm: 95 watts x 2 chan.
• Bridged, 4 ohm: 190 watts x 1 chan.
• Max power output: 280 watts x 1 chan.
• Pulse Width Modulated MOSFET Power Supply

1500W 2-Channel Amplifier • Built-in Full/HP/LP Crossovers • Bass Remote Control Included • PWM MOSFET Power Supply • Selectable Bass Boost • 2-Way System Protection Circuitry

692W Power Series 2-Channel Amplifier • 180W x 2 chan. @ 4 Ohm • 290W x 2 chan. @ 2 Ohm • MOSFET power supply • die-cast aluminum chassis • DBO filter • preamp outputs • CEA-2006 compliant

200 watts, 2-Channel Amplifier • CEA-2006 Compliant • Adjustable 12dB/octave Crossover • Pass-Thru Outputs • S/N ratio: >70 dB • Frequency Response: 15 Hz - 20 kHz

HRA Series 2-Channel Class AB Car Amplifier • 300W x 2 chan. @ 4 ohm • 500W x 2 chan. @ 2 ohm • 700W x 2 chan. Max • MOSFET power supply • Bridgeable operation • Speaker-level inputs

• 70 Watts RMS x 2 @ 4 ohm
• 125 Watts RMS x 2 @ 2 ohm
• Total Peak Power: 1000 Watts
• Selectable Bass Boost: 0/+6/+12 dB
• Heavy duty aluminum alloy heat-sink for extreme heat dissipation
• 9"W x 9-1/2"L x 2"H

QX-Series 2-Channel Class AB Car Amplifier • 220W x 2 chan. @ 4 ohm • 280W x 2 chan. @ 2 ohm • 560W x 1 chan. @ 4 ohm • 980W x 1 chan. Max • Pulse width modulated MOSFET power supply • Wired remote bass level control included • Preamp RCA outputs

QX-Series 2-Channel Class AB Car Amplifier • 150W x 2 chan. @ 4 ohm • 180W x 2 chan. @ 2 ohm • 360W x 1 chan. @ 4 ohm • 620W x 1 chan. Max • Pulse width modulated MOSFET power supply • Trimode capable • Preamp RCA outputs

• 4 ohm: 120 watts x 2
• 2 ohm: 240 watts x 2
• Bridged, 4 ohm: 400 watts x 1
• CEA-2006 compliant
• Optional remote bass/treble boost
• S/N ratio: 85 dB
• Frequency Response: 20 Hz - 20 kHz

• 260W x 2 Chan. @ 4 ohm
• 1600W Max
• MOSFET PWM Power supply
• Wired remote bass level control
• Heavy-duty heatsink
• Low- and high-pass crossover

Street Machine AT 2-Channel Class A/B Car Amplifier • 1000 Watts Max • 500 Watts RMS • Twin Coil MOSFET Auto Step Power Supply • Pro-Fi Outputs • Soft Start Turn-On • 4-Way System Protection Circuitry • Bass Boost

300W 2 channel Amplifier • 150W x 2 channel power output at 2 Ohm • 75W x 2 channel power output at 4 Ohm • 2-way Highpass/Lowpass Xover • Intelli Bass

• 2200W Max, FX Series 2-Channel Amplifier • 4 ohm: 370 watts x 2 chan • 2 ohm: 450 watts x 2 chan •Bridged, @ 4 ohm: 900 watts x 1 chan • S/N Ratio: 98dB • THD: 0.02%

• Road Thunder Series 2-Channel Class AB Car Amplifier
• 90W x 2-Chan @ 2 Ohm
• 60W x 2-Chan @ 4 Ohm
• Speaker-level (high-level) inputs
• Preamp RCA outputs
• High/Low-Pass Filters

Bridgeable MOSFET 2 Channel Amplifier • 600W Peak / 300W RMS x 1 bridged power output • 80Hz selectable low-pass crossover • 4-way protection circuitry • gold-plated RCA jacks

Picasso Series 4-Channel Class AB Car Amplifier • 150W x 2 Chan. @ 4 ohm • 220W x 2 chan. @ 2 ohm • 440 Watts Total • Bi-linear selectable • Tuned Bass EQ • Platinum-Plated Contacts • End Caps Included

• 4 ohm: 40 watts x 2 chan.
• 60 watts x 2 chan.
• Bridged, 4 ohm: 120 watts x 1 chan.
• 2/1-channel operation

JackHammer Series 2-Channel Class AB Car Amplifier • 50W x 2 chan. @ 4 ohm • 100W x 2 chan. @ 2 ohm • 200W x 1 chan. @ 4 ohm • 200W x 2 chan. Max • Patented Pure N-Channel technology • Smart Engage circuitry • Stackable configuration • Built-in active fan cooling

• 137 Watts RMS x 2 @ 4 ohm
• 275 Watts RMS x 2 @ 2 ohm
• 550 Watts RMS x 1 @ 4 ohm Bridged
• Total Peak Power: 1100 Watts
• Variable low-pass filter: 40 - 150 Hz
• Subsonic filter: 15 - 55 Hz
• Variable Bass Boost: 0 to +9 dB bass boost
• Complete 4 Gauge 2-Channel Amplifier Installation Kit