Discontinued 2-Channel Amplifiers

300 watts 2-channel Gothic Series car amplifier • 85 watts RMS x 2 chan @ 2 ohm • 70 watts RMS x 2 chan. @ 4 ohm • Bridgeable • S/N Ratio: >97 dB

300 watts RMS x 2 at 2 ohm • 200 watts RMS x 2 at 4 ohm • Full MOSFET Circuitry • Thermal/Short/Overload Protection Circuitry

Ryval Series 2-Channel Class AB Car Amplifier • 75W x 2 chan. @ 4 ohm • 120W x 2 chan. @ 2 ohm • 250W x 1 chan. @ 4 ohm • 500W x 1 chan. Max • Speaker-level input • Preamp RCA outputs

GTX Series 2-Channel Car Amplifier • Class AB • 800 Watts Max • 130W x 2 Chan. @ 4 Ohm • 170W x 2 Chan. @ 2 Ohm • 0-10 Tuned dB Bass Boost • Speaker-Level Inputs • Gold-Plated Contacts • CEA-2006 Compliant

500W Peak / 250W RMS x 2 Channel Vibe Series Amplifier • Electronic Crossover Network • gold RCA inputs • bass boost circuit • 2 ohm stable • MOSFET Power Supply

XT V3 Series 2-Channel Digital Car Amplifier • Class AB • 150W x 2 Chan. @ 2 Ohm • 100W x 2 Chan @ 4 Ohm • 300W Bridged • Elevated Efficiency Platform • High-Pass Filter • Low-Pass Filter • Aluminum HeatSink

400W 2 channel Amplifier • 200W x 2 channel power output at 2 Ohm • 100W x 2 channel power output at 4 Ohm • 2-way Highpass/Lowpass Xover • Intelli Bass

• 900W Peak
• 450W RMS
• Titanium deposit Impregnated Cone Woofer with Rolled Outer Edge
• Santoprene Rubber Surround
• Highly-Efficient UniPlate™ Pole-Piece and Back Plate
• 125 Watts RMS x 2 @ 4 ohm
• 250 Watts RMS x 2 @ 2 ohm
• 500 Watts RMS x 1 @ 4 ohm, Bridged
• Mono or 2-Channel Operation
• CEA-2006 Compliant
• Signal to Noise Ration: 105 dBA
• Selectable crossover modes: FULL / HPF / LPF

XA Series 2-Channel Car Amplifier • 60W RMS x 2 Chan. @ 4 Ohm • 85W RMS x 2 Chan. @ 2 Ohm • 160W RMS x 1 Chan. @ 4 Ohm Bridged • MOSFET Power Supply • Variable Bass Boost • Variable High Pass • Variable Low Pass

• RMS: 4 ohm: 139 watts x 2 chan., 2 ohm: 203 watts x 2 chan., Bridged, 4 ohm: 250 watts x 1 chan.
• Total Peak Power: 1200W
• Signal to Noise Ratio: >80 dB
• Frequency Response: 10 - 20,000 Hz
• 2 or Mono channel operation
• 6.49 W x 7.91 L x 2.20 H

600 watt 2-Channel Class-A/B Amplifier • 150W RMS x 2 @ 2 Ohm • Built-In Crossover • Adjustable Input Gain • Large Gold-Plated Terminals

2-Channel, 520W Amplifier • 130W RMS x 2 @ 4 ohm • 350W RMS x 1 @ 4 ohm bridged • Bass Boost • 2 RCA Inputs, 2 RCA Outputs • 2 Ohm Stable

• 200W RMS x 2 Chan. @ 4 ohm
• Max 1000W x 2 Chan. @ 2 ohm
• Max 2000W x 1 Chan. @ 4 ohm
• 2-Way System Protection
• 2/1 Channel Operation
• 8 Gauge Power and Ground Inputs
• Silver Anodized Heatsink

Full Range 2-Channel Class A/B Car Amplifier • 360W • Dual N-Channel MOSFET output stage • Speaker-level inputs • Preamp RCA outputs • Variable low/high-pass filter • Adjustable input sensitivity

Tarantula Series 2-Channel Class A/B Car Amplifier • 175W x 2 Chan. @ 2 Ohm • 110W x 2 Chan. @ 4 Ohm • Double Side PCB And SMD Components • Remote Bass Level Input • Active X-Over • 3-Way System Protection Circuitry

250W RMS x 2 chan at 4 ohm • 1000W RMS x 1 chan in bridged mode • 500W RMS x 2 chan at 2 ohm • Bass Remote Included • 2 ohm stereo stable

• 500 Watts RMS x 2 @ 4 ohm
• 1000 Watts RMS x 2 @ 2 ohm
• 2000 Watts RMS x 1 @ 4 ohm Bridged
• Total Peak Power: 4000 Watts
• Variable high-pass filter: 60 - 1200 Hz
• Variable low-pass filter: 30 - 250 Hz
• Variable Bass Boost: 0 to +9 dB bass boost
• Dimensions: 11.4"W x 20"L x 3.8"H

2-Channel High Current Amplifier • 175W x 2 @ 2 Ohm • 100 x 2 @ 4 Ohm • 500W x 1 @ 2 Ohm (Bridged) • Built-In Crossover • DPS • Q-Tune

2-Channel Class AB ATX Series Car Amplifier • PWM MOSFET Power Supply • Bass Boost • Soft Start Turn-On • High Level Inputs • Preamp RCA Outputs • 4-Way System Protection Circuitry • Flat Panel Heatsink Design • Subsonic Filter

2 channel audio amplifier • 50 watts x 2 chan. @ 4 ohm • 75 watts x 2 chan. @ 2 ohm • Continuous variable High-Pass and Low-Pass crossover settings • Continuous variable bass boost settings • 0 - 12dB Bass boost • RCA Inputs