Discontinued Line Out Converters

• 400 Watts Per Channel input
• Two channel level input converts your signal from your factory amps to enhance your bass output with an external sub and amp
•Easy to tune with main level, bass, and bass enhancer knobs to reach your perfect bass frequencies that you are targeting
• Bass enhancer that brings out even more bass where there once was very little, you will get more output
• .01% THD

• 2-Channel Input
• Adjustable Gain For Each Channel
• 80W Max Per Channel
• 12V Signal Sense Turn On
• Universal Application

• Speaker Cable to RCA Adapter
• 2-Channel K-Series
• Line Out Converter
• K Grip Connectors w/ Split Pin RCA
• Silver Tinned OFC Wire

• 50 watts maximum input
• 20 to 20,000Hz output based on input signal Transformer
• 2-channel adjustable high-power line out converter
• Works with most factory-installed radios

• Six channels line output converter
• Bass enhancer processing
• Audio sense turn-on
• Ground isolation feature

• Adjustable Line Output Converter
• Two channel
• Gold Plated RCA Jacks
• 10 ohm Input impedance

• Full Range and Sub outputs
• 400W per channel @ 4 Ohm
• Max Preamp Output: 9.8 VRMS
• Signal Sense turn on with 12V Output

• 6 Channel high end line output converter

• 2 channel input
• Compatible with OEM radios that have short circuit protection
• Separate level adjustment for each channel
• Molded channels so zip ties will not slip

• 4-Channel Premium Adjustable Line Output Converter
• 6:1 Step Down With Adjustable Output
• 600w Total Maximum Input (150w Per Channel)
• Super Low Distortion

• Stereo Amplified Signal Converter
• Eliminates noise interference – separated grounds
• Selectable DC and AC voltages detection – full compatibility with any original manufacturer head-units
• Automatically generates a remote control signal to activate the associated amplifier
• Bandwidth (+/- 1dB): 10 Hz – 80 kHz
• Signal/noise ratio: > 100dB

• 8 Channel Line Output Converter

• Fully Active, Speaker Level to Line Output Converter with Auto Turn On
•Fully-Regulated Switching MOSFET Power Supply
• Differential-balanced Input Architecture
• 40V RMS Per Channel
•DC-Offset Sensing or Signal Sensing Automatic Turn-On
• Ultra Compact Chassis Design
•Onboard LED Clipping Indicator

• 6-channel audio integration interface
• Designed to integrate with factory OEM systems
• 6 channel analog output (Front L/R, Rear L/R, Sub and Center)
• Compatible with select 2010-2025 vehicles from GMC, Chevrolet, Cadillac with factory BOSE audio systems

• Six Channel Line Output Converter with AccuBASS
• Six Channels Of Active Speaker Level Inputs – Accepts Up To 400 Watts Per Channel
• AccuBASS Circuitry
• GTO Circuit – Powers Up The Lc7i When It Detects Signal On The Speaker Level Input

• 2-channel line out converter
• Speaker Level Input Accepts Up To 400 Watts RMS
• Bass Enhancer And Bass Compensation
• xBOOST Technology
• Selectable Auto On
• 9.5 Volt Pre-Out
• 12 Volt Trigger Out

• 2-Channel Speaker Level Inputs
• Adjustable xBOOST corrects for bass roll-off
• Handles up to 30V (225 watts RMS)
• Provides up to 9.5 Volts of output
• Auto turn-on via DC offset or Audio detection 
• Load selection switch (20, 60, or 20K ohm)
• Wired remote bass level control included
• LED Clip indicator

• 8-Channel Speaker Level Inputs
• 8-Channel RCA Outputs
• Handles up to 40V (400 watts RMS)
• Provides up to 9.5 Volts of output
• Auto turn-on via DC offset or Audio detection 
• Load selection switch (20, 60, or 20K ohm)
• Wired remote bass level control included
• LED Clip indicator

• 2-channel line out converter
• Speaker Level Input Accepts Up To 400 Watts RMS
• Bass Enhancer And Bass Compensation
• xBOOST Technology
• Selectable Auto On
• 9.5 Volt Pre-Out
• 12 Volt Trigger Out

• 6:1 Step Down With Adjustable Output
• DC Amplifier Turn On Trigger
• 80w Maximum Input total (40w per channel)