Discontinued Line Out Converters for your 2006 Outback

• 2 Channel Line Output Converter
• Excellent signal to noise ratios
• High level/low level input
• Aux input
• Adjustable gain output

• 5-channel line output converter
• Integrate any amplifier to your existing factory audio system easily
• Handles up to 4V (50 watts RMS)
• 4 CH High Level Input / 5 CH RCA Output
• Direct Insert Power / Speaker Terminal
• Lowest Impedance and Best Power Filter
• FR4 Double Sides PCB
• Remote Trigger Output with Signal Sensing
• Power / Clipping LED Indicators

• 2-channel active line output converter
• 2 speaker-level inputs with up to 400 watts RMS power handling
• 2 preamp-level outputs (up to 10V)

• 2-Channel High-to-Low Level Converter
• High-to-Low Signal Converter to Connect 2-Channel Amplifiers to Radios Without RCA Output
• Output Voltage: Up to 3V (low-level)
• Mounting: Behind Dash

• Remote Level Control
• Converts the speaker levels of a factory or aftermarket radio to RCA (pre-amp level)
• In-dash or under-dash mount control knob

• Two channels line output converter
• Selectable DC offset and auto turn-on
• Low impedance outputs
• Compact design with maximum 11V preout

• 2-Channel line output converter with speaker emulator<
• Remote output with signal sensing
• Features power LED indicator
• Small and compact design

• Designed to install additional aftermarket amplifier
• Provides 55-watt maximum input
• Separate level adjustment for each channel
• Signal sense turn-on

• 2-Channel Adjustable Line Level Converter with EIA Color Coded Inputs
• Adds Amplifier to OEM System
• Converts Speaker Wire Inputs to RCA Outputs

2-Channel High Level Speaker Output From Your Car Stereo To The 2-Channel Low Level (RCA) Line Input Of Your Amplifier • Output Signal Is Adjustable For Each Channel &bull • Gold Plated RCA Connection For Better Signal Transfer •

• 4-channel High-powered
• Premium adjustable line output converter
• 6:1 Step Down With Adjustable Output
• DC Amplifier Turn On Trigger
• Super Low Distortion

• 2-channel High-powered
• Premium adjustable line output converter
• 6:1 Step Down With Adjustable Output
• DC Amplifier Turn On Trigger
• Super Low Distortion

• 2-Channel Input
• Adjustable Gain For Each Channel
• 150W Max Per Channel
• 12V Signal Sense Turn On
• Universal Application

• High to Low 4-Channel Compact Line Output Converter
• Perfect for Adding an Amplifier to an OEM System
• Gold-Plated Contacts
• Durable Plastic Casing
• Adjustable Gain Control

• 2 Inputs - 2 Outputs
• Incredible input power capabilities
• Enhanced output controls
• Noise isolation countermeasures.
• Combined with the newest vehicle systems' compatibility

• 4-Channel Input
• Adjustable Gain For Each Channel
• 80W Max Per Channel
• 12V Signal Sense Turn On
• Universal Application

• 400 Watts Per Channel input
• Two channel level input converts your signal from your factory amps to enhance your bass output with an external sub and amp
•Easy to tune with main level, bass, and bass enhancer knobs to reach your perfect bass frequencies that you are targeting
• Bass enhancer that brings out even more bass where there once was very little, you will get more output
• .01% THD

• 2-Channel Input
• Adjustable Gain For Each Channel
• 80W Max Per Channel
• 12V Signal Sense Turn On
• Universal Application

• Speaker Cable to RCA Adapter
• 2-Channel K-Series
• Line Out Converter
• K Grip Connectors w/ Split Pin RCA
• Silver Tinned OFC Wire

• 50 watts maximum input
• 20 to 20,000Hz output based on input signal Transformer
• 2-channel adjustable high-power line out converter
• Works with most factory-installed radios

• Six channels line output converter
• Bass enhancer processing
• Audio sense turn-on
• Ground isolation feature

• Adjustable Line Output Converter
• Two channel
• Gold Plated RCA Jacks
• 10 ohm Input impedance

• Full Range and Sub outputs
• 400W per channel @ 4 Ohm
• Max Preamp Output: 9.8 VRMS
• Signal Sense turn on with 12V Output

• 6 Channel high end line output converter

• 2 channel input
• Compatible with OEM radios that have short circuit protection
• Separate level adjustment for each channel
• Molded channels so zip ties will not slip

• 4-Channel Premium Adjustable Line Output Converter
• 6:1 Step Down With Adjustable Output
• 600w Total Maximum Input (150w Per Channel)
• Super Low Distortion

• 8 Channel Line Output Converter

• Stereo Amplified Signal Converter
• Eliminates noise interference – separated grounds
• Selectable DC and AC voltages detection – full compatibility with any original manufacturer head-units
• Automatically generates a remote control signal to activate the associated amplifier
• Bandwidth (+/- 1dB): 10 Hz – 80 kHz
• Signal/noise ratio: > 100dB

• Fully Active, Speaker Level to Line Output Converter with Auto Turn On
•Fully-Regulated Switching MOSFET Power Supply
• Differential-balanced Input Architecture
• 40V RMS Per Channel
•DC-Offset Sensing or Signal Sensing Automatic Turn-On
• Ultra Compact Chassis Design
•Onboard LED Clipping Indicator

• Six Channel Line Output Converter with AccuBASS
• Six Channels Of Active Speaker Level Inputs – Accepts Up To 400 Watts Per Channel
• AccuBASS Circuitry
• GTO Circuit – Powers Up The Lc7i When It Detects Signal On The Speaker Level Input

• 2-Channel Speaker Level Inputs
• Adjustable xBOOST corrects for bass roll-off
• Handles up to 30V (225 watts RMS)
• Provides up to 9.5 Volts of output
• Auto turn-on via DC offset or Audio detection 
• Load selection switch (20, 60, or 20K ohm)
• Wired remote bass level control included
• LED Clip indicator

• 2-channel line out converter
• Speaker Level Input Accepts Up To 400 Watts RMS
• Bass Enhancer And Bass Compensation
• xBOOST Technology
• Selectable Auto On
• 9.5 Volt Pre-Out
• 12 Volt Trigger Out

• 6:1 Step Down With Adjustable Output
• DC Amplifier Turn On Trigger
• 80w Maximum Input total (40w per channel)

• 4-Channel Speaker Level Inputs
• 4-Channel RCA Outputs
• Handles up to 40V (400 watts RMS)
• Provides up to 9.5 Volts of output
• Auto turn-on via DC offset or Audio detection 
• Load selection switch (20, 60, or 20K ohm)
• Wired remote bass level control included
• LED Clip indicator

• 2-Channel Speaker Level Inputs
• 4-Channel RCA Outputs
• Handles up to 40V (400 watts RMS)
• Provides up to 9.5 Volts of output
• Auto turn-on via DC offset or Audio detection 
• Load selection switch (20, 60, or 20K ohm)
• LED Clip indicator

• 2-Channel Speaker Level Inputs
• 4-Channel RCA Outputs
• Handles up to 40V (400 watts RMS)
• Provides up to 9.5 Volts of output
• Auto turn-on via DC offset or Audio detection 
• Load selection switch (20, 60, or 20K ohm)
• LED Clip indicator

• 2-Channel Micro Line Output Converter
• Input Circuit corrects crossover distortion
• Individual adjustable outputs
• Auto turn-on via DC offset
• Compact design allows for easy install

• Fully Active, Speaker Level to Line Output Converter with Auto Turn On
•Fully-Regulated Switching MOSFET Power Supply
• Differential-balanced Input Architecture
• 40V RMS Per Channel
•DC-Offset Sensing or Signal Sensing Automatic Turn-On
• Ultra Compact Chassis Design
•Onboard LED Clipping Indicator

• Fully Active, Speaker Level to Line Output Converter with Auto Turn On
•Fully-Regulated Switching MOSFET Power Supply
• Differential-balanced Input Architecture
• 40V RMS Per Channel
•DC-Offset Sensing or Signal Sensing Automatic Turn-On
• Ultra Compact Chassis Design
•Onboard LED Clipping Indicator

• Two Channels of Active Speaker Level Inputs
• AccuBASS Processing
• 9.5 Volt Pre-Amp Outs
• GTO - Signal Sensing Inputs