SPL GLW-15
3000W 15" Gorilla Series Dual 2 ohm Car Subwoofer
3000W 15" Gorilla Series Dual 2 ohm Car Subwoofer
• Peak Power: 3000W
• RMS Power: 1400W
• IMPP Cone
• Extended Excursion NBR Surround
• Peak Power: 3000W
• RMS Power: 1400W
• IMPP Cone
• Extended Excursion NBR Surround
SPL GLW-10 - Open Box, Very Good Condition (Used)
2200W 10" GLW Series Dual 2-Ohm Car Subwoofer (Very Good, Used)
2200W 10" GLW Series Dual 2-Ohm Car Subwoofer (Very Good, Used)
• 1000 Watts RMS
• 2200 Watts Max
• IMPP cone
• Extended excursion nitrile butadiene rubber surround
• Polpropylene Molded Dust Cap Textured Basket
• Built-in venting on back plate, voice coil and T-Yoke dissipates heat
• Woofers are double overcast stitched directly to the IMPP cone surface
• 1000 Watts RMS
• 2200 Watts Max
• IMPP cone
• Extended excursion nitrile butadiene rubber surround
• Polpropylene Molded Dust Cap Textured Basket
• Built-in venting on back plate, voice coil and T-Yoke dissipates heat
• Woofers are double overcast stitched directly to the IMPP cone surface
SPL GLW-12 Open Box Complete
2,500 Watt 12" Dual 2-Ohm Gorilla Series Car Subwoofer
2,500 Watt 12" Dual 2-Ohm Gorilla Series Car Subwoofer
• Open Box Complete
• 600W RMS
• 2500W Max
• Polypropylene Woofer Cone
• NBR Surround
• Stamped Steel Basket
• 254 oz. Double Stacked Magnet
• 2.5" High Temperature OFC Voice Coil
• Open Box Complete
• 600W RMS
• 2500W Max
• Polypropylene Woofer Cone
• NBR Surround
• Stamped Steel Basket
• 254 oz. Double Stacked Magnet
• 2.5" High Temperature OFC Voice Coil
SPL SP3-12
12" Dual 2 ohm SP3 Series Car Subwoofer
12" Dual 2 ohm SP3 Series Car Subwoofer
12" Dual 2 ohm SP3 Series Subwoofer • 2600W Max • 1000W RMS • Polypropylene injection molded cone woofer • Conex/Cotton composite spider • KSV Kapton voice coil • Nickel plated 8 Gauge compression wire terminal • Vented back plate
12" Dual 2 ohm SP3 Series Subwoofer • 2600W Max • 1000W RMS • Polypropylene injection molded cone woofer • Conex/Cotton composite spider • KSV Kapton voice coil • Nickel plated 8 Gauge compression wire terminal • Vented back plate
SPL SPLW-122X
12" Dual 2 Ohm SPLW Series Car Subwoofer
12" Dual 2 Ohm SPLW Series Car Subwoofer
12" Dual 2 Ohm SPLW Series Car Subwoofer • 2500W Peak • 600W RMS • Non-Pressed Pulp Cone • Polyether Foam Surround • Candy Apple Red Finish • Diamond Cut Accents • Die-Cast Aluminum Frame • 2-1/2” Dual 4-Layer Voice Coil
12" Dual 2 Ohm SPLW Series Car Subwoofer • 2500W Peak • 600W RMS • Non-Pressed Pulp Cone • Polyether Foam Surround • Candy Apple Red Finish • Diamond Cut Accents • Die-Cast Aluminum Frame • 2-1/2” Dual 4-Layer Voice Coil
SPL SP3-15
15" Dual 2 ohm SP3 Series Car Subwoofer
15" Dual 2 ohm SP3 Series Car Subwoofer
15" Dual 2 ohm SP3 Series Subwoofer • 2800W Max • 1200W RMS • Polypropylene injection molded cone woofer • Butyl rubber surround • Conex/Cotton composite spider • KSV Kapton voice coil • Nickel plated 8 Gauge compression wire terminal
15" Dual 2 ohm SP3 Series Subwoofer • 2800W Max • 1200W RMS • Polypropylene injection molded cone woofer • Butyl rubber surround • Conex/Cotton composite spider • KSV Kapton voice coil • Nickel plated 8 Gauge compression wire terminal
SPL SP2-12
12" Dual 4 ohm SP2 Series Car Subwoofer
12" Dual 4 ohm SP2 Series Car Subwoofer
12" Dual 4 ohm SP2 Series Subwoofer • 1400W Max • 600W RMS • Polypropylene injection molded cone woofer • Butyl rubber surround • Texture coat finish on stamped steel basket • KSV Kapton voice coil • Nickel plated 8 Gauge compression wire terminal
12" Dual 4 ohm SP2 Series Subwoofer • 1400W Max • 600W RMS • Polypropylene injection molded cone woofer • Butyl rubber surround • Texture coat finish on stamped steel basket • KSV Kapton voice coil • Nickel plated 8 Gauge compression wire terminal
SPL SPLW-152X
15" Dual 2 ohm SPLW Series Car Subwoofer
15" Dual 2 ohm SPLW Series Car Subwoofer
15" Dual 2 Ohm SPLW Series Car Subwoofer • 2800W Peak • 700W RMS • Non-Pressed Pulp Cone • Polyether Foam Surround • Candy Apple Red Finish • Diamond Cut Accents • Die-Cast Aluminum Frame • 2-1/2” Dual 4-Layer Voice Coil
15" Dual 2 Ohm SPLW Series Car Subwoofer • 2800W Peak • 700W RMS • Non-Pressed Pulp Cone • Polyether Foam Surround • Candy Apple Red Finish • Diamond Cut Accents • Die-Cast Aluminum Frame • 2-1/2” Dual 4-Layer Voice Coil
SPL SP3-10
10" Dual 2 ohm SP3 Series Car Subwoofer
10" Dual 2 ohm SP3 Series Car Subwoofer
10" Dual 2 ohm SP3 Series Subwoofer • 2000W Max • 800W RMS • Polypropylene injection-molded cone woofer • Butyl rubber surround • Nickel plated 8 Gauge compression wire terminal • Conex, cotton composite spider
10" Dual 2 ohm SP3 Series Subwoofer • 2000W Max • 800W RMS • Polypropylene injection-molded cone woofer • Butyl rubber surround • Nickel plated 8 Gauge compression wire terminal • Conex, cotton composite spider
SPL SP1-12X
900W Peak, 12" Dual 4 ohm SP1 Series Subwoofer
900W Peak, 12" Dual 4 ohm SP1 Series Subwoofer
• 900W Peak
• 400W RMS
• Polypropylene injection molded cone woofer
• Butyl rubber surround
• Texture coat finish on stamped steel basket
• KSV Kapton voice coil
• Nickel plated 8 Gauge compression wire terminal
• 900W Peak
• 400W RMS
• Polypropylene injection molded cone woofer
• Butyl rubber surround
• Texture coat finish on stamped steel basket
• KSV Kapton voice coil
• Nickel plated 8 Gauge compression wire terminal
SPL SP2-15
15" Dual 4 ohm SP2 Series Car Subwoofer
15" Dual 4 ohm SP2 Series Car Subwoofer
15" Dual 4 ohm SP2 Series Subwoofer • 1600W Max • 700W RMS • Polypropylene injection molded cone woofer • Butyl rubber surround • Texture coat finish on stamped steel basket • KSV Kapton voice coil • Nickel plated 8 Gauge compression wire terminal
15" Dual 4 ohm SP2 Series Subwoofer • 1600W Max • 700W RMS • Polypropylene injection molded cone woofer • Butyl rubber surround • Texture coat finish on stamped steel basket • KSV Kapton voice coil • Nickel plated 8 Gauge compression wire terminal
SPL SP2-10
10" Dual 4 ohm SP2 Series Car Subwoofer
10" Dual 4 ohm SP2 Series Car Subwoofer
10" Dual 4 ohm SP2 Series Subwoofer • 900W Max • 400W RMS • Polypropylene injection-molded cone woofer • Butyl rubber surround • Nickel plated 8 Gauge compression wire terminal • Suspension integrated tinsel leads
10" Dual 4 ohm SP2 Series Subwoofer • 900W Max • 400W RMS • Polypropylene injection-molded cone woofer • Butyl rubber surround • Nickel plated 8 Gauge compression wire terminal • Suspension integrated tinsel leads
SPL SP1-10
10" Dual 4 ohm SP1 Series Car Subwoofer
10" Dual 4 ohm SP1 Series Car Subwoofer
10" Dual 4 ohm SP1 Series Subwoofer • 700W Max • 350W RMS • Polypropylene injection-molded cone woofer • Butyl rubber surround • Poly cotton spider • Nickel plated 8 Gauge compression wire terminal • Suspension integrated tinsel leads
10" Dual 4 ohm SP1 Series Subwoofer • 700W Max • 350W RMS • Polypropylene injection-molded cone woofer • Butyl rubber surround • Poly cotton spider • Nickel plated 8 Gauge compression wire terminal • Suspension integrated tinsel leads
SPL S1-10L-Open Box
10" Dual 4 ohm S1 Series Subwoofer
10" Dual 4 ohm S1 Series Subwoofer
10" Dual 4 ohm S1 Series Subwoofer • 800 Watts Peak • 300 Watts RMS • Dual 4 ohm • Polypropylene Cone • Rolled Surround • 1-1/2" BASV Aluminum voice coil • 70 oz. Magnet
10" Dual 4 ohm S1 Series Subwoofer • 800 Watts Peak • 300 Watts RMS • Dual 4 ohm • Polypropylene Cone • Rolled Surround • 1-1/2" BASV Aluminum voice coil • 70 oz. Magnet
SPL GLW-12
2,500 Watt 12" Dual 2-Ohm Gorilla Series Car Subwoofer
2,500 Watt 12" Dual 2-Ohm Gorilla Series Car Subwoofer
• 600W RMS
• 2500W Max
• Polypropylene Woofer Cone
• NBR Surround
• Stamped Steel Basket
• 254 oz. Double Stacked Magnet
• 2.5" High Temperature OFC Voice Coil
• 600W RMS
• 2500W Max
• Polypropylene Woofer Cone
• NBR Surround
• Stamped Steel Basket
• 254 oz. Double Stacked Magnet
• 2.5" High Temperature OFC Voice Coil
SPL APW-12
1200W 12" APW Series Single 4-Ohm Car Subwoofer
1200W 12" APW Series Single 4-Ohm Car Subwoofer
• FEATURE 1
• FEATURE 2
• FEATURE 3
• FEATURE 4
• FEATURE 5
• FEATURE 6
• FEATURE 7
• FEATURE 1
• FEATURE 2
• FEATURE 3
• FEATURE 4
• FEATURE 5
• FEATURE 6
• FEATURE 7
SPL GLW-10
2200W 10" GLW Series Dual 2-Ohm Car Subwoofer
2200W 10" GLW Series Dual 2-Ohm Car Subwoofer
• 1000 Watts RMS
• 2200 Watts Max
• IMPP cone
• Extended excursion nitrile butadiene rubber surround
• Polpropylene Molded Dust Cap Textured Basket
• Built-in venting on back plate, voice coil and T-Yoke dissipates heat
• Woofers are double overcast stitched directly to the IMPP cone surface
• 1000 Watts RMS
• 2200 Watts Max
• IMPP cone
• Extended excursion nitrile butadiene rubber surround
• Polpropylene Molded Dust Cap Textured Basket
• Built-in venting on back plate, voice coil and T-Yoke dissipates heat
• Woofers are double overcast stitched directly to the IMPP cone surface
SPL APW-10
900W Max (360W RMS) 10" APW Series Single 4-Ohm Car Subwoofer
900W Max (360W RMS) 10" APW Series Single 4-Ohm Car Subwoofer
• 360 Watts RMS
• 900 Watts Max
• Polypropylene Cone
• 2" Single Voice Coil
• Top-mount depth: 4.875"
• 360 Watts RMS
• 900 Watts Max
• Polypropylene Cone
• 2" Single Voice Coil
• Top-mount depth: 4.875"































