Rockford Fosgate Tweeters at Sonic Electronix

Rockford Fosgate Tweeters

Audio systems are not complete without the treble and highs Rockford Fosgate tweeters will provide.
Loading...
Refers to the size of the tweeter. Typically, smaller tweeters produces less output with higher frequency response.
Designs such as cone, dome, semi-dome, balanced dome, and whizzer are most popular. Cone tweeters are simple, efficient and typically are the most reasonably priced. Dome tweeters are used in most home speakers, and provide a smoother and more accurate sound. Semi-dome design is one with a dome placed inside a cone. A Balanced dome driver is a semi-dome with equal reproduction area given the cone and dome portions of the driver. A whizzer tweeter is a separate tweeter cone driven by the voice coil of the woofer.
The RMS power is the amount of power the speaker requires to operate safely and properly. RMS Power Handling refers to the amount of power a speaker can handle on a continuous basis. We recommend powering your speakers or subwoofer with 80%-120% of its recommended RMS rating. The RMS power handling specification is typically rated per speaker unless otherwise noted.
Peak power handling refers to the amount of power a speaker can handle during a brief musical burst. The RMS power range figure is a much more reliable rating for determining the speaker's power requirements. The Peak power handling specification is typically rated per speaker unless otherwise noted.
An efficiency or sensitivity rating tells you how effectively a speaker converts power into sound. The higher the number, the more efficient the speaker and the louder it will play with the same input power. An efficient speaker helps you maximize your available power. Most sensitivity ratings measure the speaker's output with 1 watt of input, 1 meter from the speaker. Some speakers' sensitivity is measured with 2.83 volts of input, instead of 1 watt.
 
Efficiency (1w/1m) is not an accurate indicator of a subwoofer's output capability and should not be used as a comparison to other speakers or subwoofers to determine which one is "louder".
If the speaker or tweeter is flush mountable, then it can be installed flush to the mounting surface.

When installing a flush mount tweeter, make sure that there is enough room behind the mounting surface for the tweeter and magnet. Check the mounting depth with your specific vehicle.

If the speaker or tweeter is surface mountable, then it can be installed to be raised above the mounting area.

When installing a surface mountable tweeters, make sure that there are no obstructions that will prevent the tweeter from being installed correctly.

If the speaker or tweeter is able to be angle mounted, then the installed tweeter can be positioned at an angle. An angle mounted tweeter can improve the audible sound quality of your system.

When installing a angle mountable tweeters, make sure that there are no obstructions that will prevent the tweeter from being installed correctly.

The load value (in ohms) that the speakers present to the amplifier per voice coil - the amount of resistance to the current flow. This is a key specification as subs wired in parallel or low impedances can create problems with your amplifier and potentially void all warranties. We encourage you to ask our support department prior to purchase if you do not understand which impedance level will suit your application best.
listview icon
gridview icon
Rockford Fosgate Punch Pro PP4-NT (Sold Individually)

100W Peak (50W RMS) 1.0" Single Punch Pro Series 4-Ohm High SPL Neodymium Tweeter

PP4-NT main
Go to item page

100W Peak (50W RMS) 1.0" Single Punch Pro Series 4-Ohm High SPL Neodymium Tweeter

• 100 Watts Max, 50 Watts RMS
• 1" High Efficiency Horn Tweeter
• Aluminum Diaphragm and Phase Plug
• 4 ohms Impedance

3
Rockford Fosgate Punch Pro PP4-NT (Sold Individually)

100W Peak (50W RMS) 1.0" Single Punch Pro Series 4-Ohm High SPL Neodymium Tweeter

In stock

Only 3 Left!

 
$149.99
Rockford Fosgate Punch Pro PP4-T (Sold Individually)

1-1/2" Punch Series Car Tweeter with 4ohm Voice Coil

PP4-T main
Go to item page

1-1/2" Punch Series Car Tweeter with 4ohm Voice Coil

1-1/2" Punch Series Car Tweeter • Aluminum Bullet Construction • 100W Max • 50W RMS • 4 ohms Impedance • Integrated 6dB High-Pass Crossover • High-Temperature Voice Coil • CEA-2031 Compliant

5
Rockford Fosgate Punch Pro PP4-T (Sold Individually)

1-1/2" Punch Series Car Tweeter with 4ohm Voice Coil

In stock

 
$99.99
Rockford Fosgate Power T1T-S

1" Power T1 Series Component Tweeter Kit

T1T-S main
Go to item page

1" Power T1 Series Component Tweeter Kit

Power Series 1 Component Tweeter Kit • 150 Watts Max • 75 Watts RMS • Treated Cloth Dome Tweeter • External Crossover • PTC Protection • DDC Tweeter • Includes Grilles and Mounting Hardware

11
Rockford Fosgate Power T1T-S

1" Power T1 Series Component Tweeter Kit

Special order

Ships at Later Date

$299.99 (60.00% off)
$119.99

PAIR

4) Rockford Fosgate PP4-T 1.5" 400 Watt Heavy Duty Bullet Tweeters

1-1/2" Punch Series Car Tweeter with 4ohm Voice Coil Package

PP4-T 4 Pack main
Go to item page

1-1/2" Punch Series Car Tweeter with 4ohm Voice Coil Package

1-1/2" Punch Series Car Tweeter • Aluminum Bullet Construction • 100W Max • 50W RMS • 4 ohms Impedance • Integrated 6dB High-Pass Crossover • High-Temperature Voice Coil • CEA-2031 Compliant

5
4) Rockford Fosgate PP4-T 1.5" 400 Watt Heavy Duty Bullet Tweeters

1-1/2" Punch Series Car Tweeter with 4ohm Voice Coil Package

In stock

Only 1 Left!

 
$399.96
Rockford Fosgate Punch P1T-S

240W Peak (120W RMS) 1" Punch Series Car Tweeters Kit

P1T-S main
Go to item page

240W Peak (120W RMS) 1" Punch Series Car Tweeters Kit

1" Punch Series Car Tweeters Kit • 60 Watts RMS Each • Butyl Rubber Surround • PEI Dome Tweeter • Discreet Dual Clamp Tweeter Mounting • Recessed Tweeter Mount

16
Rockford Fosgate Punch P1T-S

240W Peak (120W RMS) 1" Punch Series Car Tweeters Kit

OUT OF STOCK

 
$89.99

PAIR

Rockford Fosgate PRIME R1T-S

160W Peak (80W RMS) 1" Mylar Balanced Dome Car Tweeters

R1T-S main
Go to item page

160W Peak (80W RMS) 1" Mylar Balanced Dome Car Tweeters

1" Prime Series Tweeter Kit • RMS: 80 Watts Per Set / 40 Watts Each Side • Peak: 160 Watts Per Set / 80 Watts Each Side • Lightweight Mylar Dome Tweeter • Frequency Response: 2,500 - 22,000 Hz • Grilles/Trim Rings Included

25
Rockford Fosgate PRIME R1T-S

160W Peak (80W RMS) 1" Mylar Balanced Dome Car Tweeters

OUT OF STOCK

$59.99 (25.00% off)
$44.99

PAIR

Rockford Fosgate Power T2T-S

1" T2 Power Series Aluminum Tweeter Kit

T2T-S main
Go to item page

1" T2 Power Series Aluminum Tweeter Kit

1" T2 Power Series Aluminum Tweeter Kit • 150W Max • 75W RMS • Aluminum Dome Neo-Tweeter • High-Pass Butterworth Crossover • DDC (Discrete Dual Clamp) Mounting • 4 ohms impedance

6
Rockford Fosgate Power T2T-S

1" T2 Power Series Aluminum Tweeter Kit

OUT OF STOCK

 
$169.99

PAIR

4) Rockford Fosgate R1T-S 1" 160 Watts Component Car Audio Tweeters System Kit

160W Peak (80W RMS) 1" Mylar Balanced Dome Car Tweeters Package

R1T-S 2 Pack main
Go to item page

160W Peak (80W RMS) 1" Mylar Balanced Dome Car Tweeters Package

1" Prime Series Tweeter Kit • RMS: 80 Watts Per Set / 40 Watts Each Side • Peak: 160 Watts Per Set / 80 Watts Each Side • Lightweight Mylar Dome Tweeter • Frequency Response: 2,500 - 22,000 Hz • Grilles/Trim Rings Included

25
4) Rockford Fosgate R1T-S 1" 160 Watts Component Car Audio Tweeters System Kit

160W Peak (80W RMS) 1" Mylar Balanced Dome Car Tweeters Package

OUT OF STOCK

$119.98 (25.00% off)
$89.98

PAIR

4) Rockford Fosgate P1T-S 1" 240 Watt Dome Tweeter Systems

240W Peak (120W RMS) 1" Punch Series Car Tweeters Kit Package

P1T-S 2 Pack main
Go to item page

240W Peak (120W RMS) 1" Punch Series Car Tweeters Kit Package

1" Punch Series Car Tweeters Kit • 60 Watts RMS Each • Butyl Rubber Surround • PEI Dome Tweeter • Discreet Dual Clamp Tweeter Mounting • Recessed Tweeter Mount

16
4) Rockford Fosgate P1T-S 1" 240 Watt Dome Tweeter Systems

240W Peak (120W RMS) 1" Punch Series Car Tweeters Kit Package

OUT OF STOCK

 
$179.98

PAIR

Rockford Fosgate M2-TS

800 Watts Marine Add-On 1" Tweeter Kit white w/ stainless grilles

M2-TS main
Go to item page

800 Watts Marine Add-On 1" Tweeter Kit white w/ stainless grilles

• 400 Watts Max Each, 100 Watts RMS Each
• 1" High Efficiency Tweeter
• Customizable Mounting
• 4 Ohms Impedance
• Sensitivity: 100 dB
• Tweeter Mounting Depth: 1.44"

Rockford Fosgate M2-TS

800 Watts Marine Add-On 1" Tweeter Kit white w/ stainless grilles

OUT OF STOCK

 
$169.99
2) Rockford Fosgate Punch Pro PP4-T

1-1/2" Punch Series Car Tweeter with 4ohm Voice Coil Super Tweeter Package

PP4-T x 2 main
Go to item page

1-1/2" Punch Series Car Tweeter with 4ohm Voice Coil Super Tweeter Package

1-1/2" Punch Series Car Tweeter • Aluminum Bullet Construction • 100W Max • 50W RMS • 4 ohms Impedance • Integrated 6dB High-Pass Crossover • High-Temperature Voice Coil • CEA-2031 Compliant

2) Rockford Fosgate Punch Pro PP4-T

1-1/2" Punch Series Car Tweeter with 4ohm Voice Coil Super Tweeter Package

OUT OF STOCK

$199.98 (15.04% off)
$169.90

Rockford Fosgate Tweeters Information

With improved clarity and high temperature voice coils, Rockford Fosgate tweeters are a must have for your audio system. With surface and flush mounting options available, these small speakers offer crisp sounds. When you think of tweeters, think of Rockford Fosgate.
    clear all items