Kicker CXARC (46CXARCT)
Wired Bass Remote Controller for CX Series Amplifiers
Wired Bass Remote Controller for CX Series Amplifiers
• Wired bass remote controller for Kicker CX series amplifiers
• Works with DX or PX series amplifiers with remote bass jack
• Includes 19.5 ft. cable and mounting accessories
• Wired bass remote controller for Kicker CX series amplifiers
• Works with DX or PX series amplifiers with remote bass jack
• Includes 19.5 ft. cable and mounting accessories
Kicker KISL (46KISL)
Speaker-level to RCA Low-level for Amplifier Input Converter for Amps with a High-Low Switch
Speaker-level to RCA Low-level for Amplifier Input Converter for Amps with a High-Low Switch
• 2-Channel Speaker to RCA Cable
• Split-Pin RCAs
• 16 Gauge Speaker Wire to RCA
• K-Grip Line & K-Grip Connectors
• Ergonomic Design • 2 Feet
• 2-Channel Speaker to RCA Cable
• Split-Pin RCAs
• 16 Gauge Speaker Wire to RCA
• K-Grip Line & K-Grip Connectors
• Ergonomic Design • 2 Feet
Kicker KISLOC2 (46KISLOC2)
K Series 2-Channel Line Output Converter With 12-Volt Turn-on
K Series 2-Channel Line Output Converter With 12-Volt Turn-on
• 2-ch speaker-to-RCA converter, LOC
• Compatible with OEM radios that have short circuit protection
• Take as much as 55 watts of input and deliver up to 8 volts of output
• 2-ch speaker-to-RCA converter, LOC
• Compatible with OEM radios that have short circuit protection
• Take as much as 55 watts of input and deliver up to 8 volts of output
Kicker Warhorse HPBT6 (50HPBT6)
6-Output Warhorse Series High-Power Battery Terminal Block
6-Output Warhorse Series High-Power Battery Terminal Block
• 6-Position High-Power Battery Terminal
• Positive and negative polarity
• 5/16" stud connectors to accept most ring terminals
• Nickel-plated brass connection posts
• 6-Position High-Power Battery Terminal
• Positive and negative polarity
• 5/16" stud connectors to accept most ring terminals
• Nickel-plated brass connection posts
Kicker DBRC (51DBRC)
Dual-Amp Remote Level Bass Control Knob for Kicker Mono Amplifiers
Dual-Amp Remote Level Bass Control Knob for Kicker Mono Amplifiers
• Controls 1-2 mono-channel amps with a 3.5mm level controller input
• Compatible with PTRTP and Hideaway powered sub enclosures
• Compatible with WXA, KEY, CXA, PXA and KPX-series amps
• Flush or surface-mountable
• Heavy-duty aluminum design with laser etching
• Single knob with high-end, metal look
• Controls 1-2 mono-channel amps with a 3.5mm level controller input
• Compatible with PTRTP and Hideaway powered sub enclosures
• Compatible with WXA, KEY, CXA, PXA and KPX-series amps
• Flush or surface-mountable
• Heavy-duty aluminum design with laser etching
• Single knob with high-end, metal look
Kicker CK4 (46CK4)
Complete 4 Gauge OFC CK-Series 2-Channel Amplifier Installation Kit
Complete 4 Gauge OFC CK-Series 2-Channel Amplifier Installation Kit
• self tapping bolt and washer
• FHS fuse holder
• gauge remote wire
• AWG butt connecter
In stock
Available Offers (2) for Kicker CK4 (46CK4)
Kicker BT4 (46BT4)
Positive or Negative Brass Battery Terminal with Two 1/0-8 Gauge and One 4-8 Gauge Output
Positive or Negative Brass Battery Terminal with Two 1/0-8 Gauge and One 4-8 Gauge Output
• BT4 Pos/Neg Battery Terminal. (2) 1/0-8AWG, (1) 4-8AWG
• (2) 1/0-4 Gauge out
• 4-8 Gauge out
• Brass construction
• BT4 Pos/Neg Battery Terminal. (2) 1/0-8AWG, (1) 4-8AWG
• (2) 1/0-4 Gauge out
• 4-8 Gauge out
• Brass construction
Kicker Warhorse BT4S (50BT4S)
4-Output Warhorse Series Battery Terminal Block
4-Output Warhorse Series Battery Terminal Block
• 4-Output Battery Terminal Block
• Positive and negative polarity
• Versa-Gauge connection points with oversized connection screws
• Nickel-plated brass connection posts
• 4-Output Battery Terminal Block
• Positive and negative polarity
• Versa-Gauge connection points with oversized connection screws
• Nickel-plated brass connection posts
Kicker CK8 (46CK8)
K-Series 8 Gauge Amp Kit with 2-Channel Interconnects; RoHS Compliant
K-Series 8 Gauge Amp Kit with 2-Channel Interconnects; RoHS Compliant
• 8AWG 2-Channel Amp Kit
• Top-quality Hyper-Flex power, ground and turn-on cables
• K Series speaker wire & interconnects + heavy-duty AFS fuse holder and fusing are all included
VIP Product Get $8.00 in rewards to spend later
In stock
Available Deal
Eligible items
Shop items below for 15% off up to $100 discount on Get 15% off an NVX XCAP1F
Kicker PKD1 (46PKD1)
1/0 Gauge Power Amplifier Installation Kit for Dual or Single Amp Installs
1/0 Gauge Power Amplifier Installation Kit for Dual or Single Amp Installs
• P-Series PKD1 1/0AWG 2-Channel
• Complete with Full Spec wire, hardware, distribution block and fusing
• 4-8 Gauge out
• Brass construction
• P-Series PKD1 1/0AWG 2-Channel
• Complete with Full Spec wire, hardware, distribution block and fusing
• 4-8 Gauge out
• Brass construction
Kicker DB4 (46DB4)
Distribution Block with Two 1/0-8 Gauge Inputs and Four 4-8 Gauge Outputs
Distribution Block with Two 1/0-8 Gauge Inputs and Four 4-8 Gauge Outputs
• Brass Construction
• (2) 1/0-8 Gauge In
• (4) 4-8 Gauge Out
• Uses Strong 5mm Screws
• Brass Construction
• (2) 1/0-8 Gauge In
• (4) 4-8 Gauge Out
• Uses Strong 5mm Screws
Kicker KMWPR820 (47KMWPR820)
20 ft. 8 Gauge Full-Spec Hyper-Flex Marine Power Wire (Red)
20 ft. 8 Gauge Full-Spec Hyper-Flex Marine Power Wire (Red)
• 8 gauge Power Cable
• OFC (100% Oxygen-Free Copper) material
• Full-spec hyper-flex cable design
• Plated in anti-corrosive 99.9% tin
• Length: 20 feet (6 meter)
• 8 gauge Power Cable
• OFC (100% Oxygen-Free Copper) material
• Full-spec hyper-flex cable design
• Plated in anti-corrosive 99.9% tin
• Length: 20 feet (6 meter)
Kicker PKD1 (46PKD1) (Like New (Open Box))
1/0 Gauge Power Amplifier Installation Kit for Dual or Single Amp Installs
1/0 Gauge Power Amplifier Installation Kit for Dual or Single Amp Installs
• P-Series PKD1 1/0AWG 2-Channel
• Complete with Full Spec wire, hardware, distribution block and fusing
• 4-8 Gauge out
• Brass construction
• P-Series PKD1 1/0AWG 2-Channel
• Complete with Full Spec wire, hardware, distribution block and fusing
• 4-8 Gauge out
• Brass construction
Kicker KEYLOC® (47KEYLOC) (Like New (Open Box))
KEY series powered line-out converter; RoHS Compliant
KEY series powered line-out converter; RoHS Compliant
• 2-channel active line output converter
• 2 speaker-level inputs with up to 400 watts RMS power handling
• 2 preamp-level outputs (up to 10V)
• 2-channel active line output converter
• 2 speaker-level inputs with up to 400 watts RMS power handling
• 2 preamp-level outputs (up to 10V)
Kicker CK4 (46CK4) (Open Box, Good)
Complete 4 Gauge OFC CK-Series 2-Channel Amplifier Installation Kit
Complete 4 Gauge OFC CK-Series 2-Channel Amplifier Installation Kit
• self tapping bolt and washer
• FHS fuse holder
• gauge remote wire
• AWG butt connecter
• self tapping bolt and washer
• FHS fuse holder
• gauge remote wire
• AWG butt connecter
Kicker FHS (46FHS)
1/0 - 8 Gauge Single AFS Fuse Holder
1/0 - 8 Gauge Single AFS Fuse Holder
• FHS Single AFS Fuse Holder
• AFS, Mini-ANL fuse holder with one 1/0-8 Gauge input and output
• (1) 1/0-8 Gauge in
• (1) 1/0-8 Gauge out
• FHS Single AFS Fuse Holder
• AFS, Mini-ANL fuse holder with one 1/0-8 Gauge input and output
• (1) 1/0-8 Gauge in
• (1) 1/0-8 Gauge out
Kicker VK8 (47VK8)
8-Gauge Oxygen Free Copper (OFC) 2-Channel Complete Amplifier Installation Kit
8-Gauge Oxygen Free Copper (OFC) 2-Channel Complete Amplifier Installation Kit
• 8 gauge Complete Amplifier Installation Kit
• Designed specifically for car audio systems up to 600 watts
• Made from OFC (100% Oxygen-Free Copper)
• 2 Channel RCA interconnect cables included for the audio signal connection from the receiver to the amplifier
Available
Ships in 10-14 days
Available Deal
Eligible items
Shop items below for 15% off up to $100 discount on Get 15% off an NVX XCAP1F
• 8 gauge Complete Amplifier Installation Kit
• Designed specifically for car audio systems up to 600 watts
• Made from OFC (100% Oxygen-Free Copper)
• 2 Channel RCA interconnect cables included for the audio signal connection from the receiver to the amplifier
Kicker KISLOAD4 (46KISLOAD4)
K-Series interface for smart radios 25ohm load 4ch 20v inputs
K-Series interface for smart radios 25ohm load 4ch 20v inputs
• Interface For Smart Radios
• 25-ohm Load
• 4-Ch 20V Inputs
• Interface For Smart Radios
• 25-ohm Load
• 4-Ch 20V Inputs
Kicker KI25 (46KI25)
K-Series 2-Channel RCA Interconnect, 5m; RoHS Compliant
K-Series 2-Channel RCA Interconnect, 5m; RoHS Compliant
• Interconnect is Three Meters (16 Feet, 4 Inches) long
• Silver-tinned, OFC wire for superior signal clarity
• The K-Grip™ connectors offer sure grip and slip-free installation
• Interconnect is Three Meters (16 Feet, 4 Inches) long
• Silver-tinned, OFC wire for superior signal clarity
• The K-Grip™ connectors offer sure grip and slip-free installation
Kicker 50PWOR020
20 ft 1/0-Gauge Warhorse Series Power Wire (Orange)
20 ft 1/0-Gauge Warhorse Series Power Wire (Orange)
• 20 feet 1/0 gauge Power Wire
• OFC (100% Oxygen-Free Copper) material
• Color: Orange
• Easily routable Hyper-Flex insulation
VIP Product Get $19.00 in rewards to spend later
• 20 feet 1/0 gauge Power Wire
• OFC (100% Oxygen-Free Copper) material
• Color: Orange
• Easily routable Hyper-Flex insulation
All About
Kicker Car Amplifier Installation & Accessories
We love people and we're ready to help you! See what separates us from our competition.





























