KEY series powered line-out converter; RoHS Compliant
Product highlights
• 2-channel active line output converter
• 2 speaker-level inputs with up to 400 watts RMS power handling
• 2 preamp-level outputs (up to 10V)
Internal Product ID:
178761
| 5 star |
|
100% |
| 4 star |
|
0% |
| 3 star |
|
0% |
| 2 star |
|
0% |
| 1 star |
|
0% |
| Durability | ||
| Value | ||
| Features | ||
| Design | ||
| Usability |
KEYLOC bass correction
This KEYLOC processor replaced an Audiocontrol LC2i for bass tuning. It flattened out the response curve of my 2019 Rav4 and restored the ultra-low bass (30-40Hz) that the LC2i could not do. I had to increase the bass boost (@ 50Hz) on my amplifier a bit and low-pass crossed over at 80Hz, and it sounds amazing. This KEYLOC does the job that I would've had an Epicenter or JL Fix processor do for a fraction of the price.
26
found this helpful.It works as advertised
I have a 2017 gmc pickup with bose system had lc2i was going to upgrade to lc2i pro but decided to go with this product instead hooked it up as directions stated then played a song with bass in it subs sounded weak didn’t realize I had the hi/lo button in instead of out as soon as I pressed the button booooooommmmm subs slamming hard now I gotta retune everything was disappointed at first but this thing does it’s job I must say
Verified purchase
22
found this helpful.Pretty Cool
Had to do the set up process a few times, but other than that it is pretty east straightforward install.
Verified purchase
22
found this helpful.Great product!
I bought this to hook up a monoblock amp and sub combo to my factory head unit in a non-amplified f150. It works great and was an easy setup with a quick question to kicker tech support. They were great! It makes my system sound great and I couldn't be happier!
Verified purchase
13
found this helpful.Works as expected. Sonic Electronix customer service is second to none.
Verified purchase
13
found this helpful.Best selling similar products
• Plug and Play Design (No cutting or splicing)
• Provides 12-volt 500-mA remote wire
• Includes gain level controller to adjust the overall output
• Designed to provide 2-channels of low-level audio
$53.99
• Adjustable 2-channel line out converter
• Separate level adjustment for each channel
• 400 watt maximum output
• AccuBASS circuitry restores bass signal
$139.00
• Plug and Play Design (No cutting or splicing)
• Provides 12-volt 500-mA remote wire
• Includes gain level controller to adjust the overall output
• Designed to provide 2-channels of low-level audio
$49.99
• Plug and Play Design (No cutting or splicing)
• Provides 12-volt 500-mA remote wire
• Includes gain level controller to adjust the overall output
• Designed to provide 2-channels of low-level audio
$49.99
• Gain Controller is included
• 55 watts per channel
• Features a T-harness that installs quickly
$59.99
• Plug and Play Design (No cutting or splicing)
• Provides 12-volt 500-mA remote wire
• Includes gain level controller to adjust the overall output
• Designed to provide 2-channels of low-level audio
$49.99
• Plug and Play Design (No cutting or splicing)
• Provides 12-volt 500-mA remote wire
• Includes gain level controller to adjust the overall output
• Designed to provide 2-channels of low-level audio
$49.99
• Fully Active, Speaker Level to Line Output Converter with Auto Turn On
•Fully-Regulated Switching MOSFET Power Supply
• Differential-balanced Input Architecture
• 40V RMS Per Channel
•DC-Offset Sensing or Signal Sensing Automatic Turn-On
• Ultra Compact Chassis Design
•Onboard LED Clipping Indicator
$99.99
• Plug and Play Design (No cutting or splicing)
• Provides 12-volt 500-mA remote wire
• Includes gain level controller to adjust the overall output
• Designed to provide 2-channels of low-level audio
$49.99
