Find car audio that fits your 2024 Ford Escape

---

• Maintain use of factory steering wheel and other controls
• Remote start ready
• Doesn't interfere with upgraded start functions or keyless entry
• Designed for DS4 system
• Compatible with select Ford/Lincoln vehicles

• Compatible with select 2009-2025 vehicles from Ford, Mazda, Lincoln Vehicles
• Connects aftermarket speakers to the factory speaker harness
• Quick and easy installation
• No cutting needed

• ABS speaker adapter plates (pair)
• Speaker adapter harnesses (pair)
• One convenient package to assist in replacing a pair of speakers
• Designed for installation of 6.5" to 6.75" speakers

• Plug and Play T-harness for faster installation
• 15-band graphic EQ or 5-band Parametric EQ
• Can be used with OE and aftermarket radios
• Retains OE voice prompts (Sync®)
• Settings adjusted wirelessly from smart device
• Selectable high pass, low pass, or bandpass filters

• Plug and Play T-harness for faster installation
• 31-band graphic EQ or 5-band Parametric EQ
• Can be used with OE and aftermarket radios
• Settings adjusted wirelessly from smart device
• Selectable high pass, low pass, or bandpass filters

• Provides 12-Volt accessory power (RAP)
• Compatible with non-amplified audio systems
• Pre-wired AXSWC harness (AXSWC sold separately)
• Micro-B USB Updatable

• Supports HDMI and 3.5mm inputs
• Works with USB 2.0 storage devices
• Up to 12Mbps transfer rate
• Designed to work with aftermarket stereos

• For Select 2020 to 2024
• Ford
• Lincoln

• T-Harness for Select 2013-Up Ford and Lincoln Vehicles
• Used with the FlashLogic FLRSBA Module

• Retain the Bang and Olufsen or Sony amplifier
• Retain the balance audio feature
• Works with 99-5834CH & 99-5841B Dash kits
• Micro-B USB Updatable

• Provides 12-Volt accessory power (RAP)
• Designed for non-amplified models
• Micro-B USB Updatable
• Retains all safety and warning chimes
• Built-in ASWC-1

• Data and SWC interface with vehicle-specific harnessing
• Provides accessory power (12-volt 10-amp)
• Retains R.A.P. (Retained Accessory Power)
• Designed for non-amplified models only
• Micro “B” USB updatable

• Provides 12-Volt accessory power (RAP)
• Color coded wires for easy installation
• Designed for non-amplified vehicles
• Retains factory sub

• 300 watts Peak Each, 100 watts RMS Each
• 1/2" PEI (Polyetherimide) Balanced Dome zero-protrusion tweeters with neodymium magnets
• Polypropylene cone material with Extended Voice Coil (EVC) technology
• Impedance: 4 ohm
• Sensitivity: 90 dB

• Speaker adapter for select 1955-2025 vehicles from Chevrolet, Ford, Dodge
• For the installation of 5.25” or 6.5” speakers
• One pair of adapters included in each package

• 90 watts Peak Each, 45 watts RMS Each
• 1/2" Piezo pole-mounted Silk Dome tweeters
• Polypropylene cone material
• Impedance: 4 ohm
• Sensitivity: 91 dB

• 450 watts Peak Each, 150 watts RMS Each
• 1/2" PEI (Polyetherimide) Balanced Dome tweeters
• Polypropylene cone material
• Impedance: 4 ohm
• Sensitivity: 92 dB

• 180 watts Peak Each, 60 watts RMS Each
• 1/2" PEI (Polyetherimide) Dome Tweeters
• Polypropylene cone material
• Impedance: 4 ohm
• Sensitivity: 91 dB

• 120 watts Peak Each, 60 watts RMS Each
• 1" PEI (Polyetherimide) Dome tweeters
• Injection molded Mineral-Filled Polypropylene cone material
• Impedance: 4 ohm
• Sensitivity: 89 dB

• 40 watts Peak Each, 20 watts RMS Each
• 3/4" PEI (Polyetherimide) Dome tweeters
• Mineral-Filled Polypropylene cone material
• Impedance: 4 ohm
• Sensitivity: 85 dB