Two Kicker 12" Subs + Belva Monoblock Amp Upgrade Bundle

Subwoofer Features:

• 12" Dual 4 Ohm CompVX (CVX) Subwoofer
• The most advanced and powerful round subwoofer from Kicker!
• The round equivalent of the Kicker Solo-Baric L7 subwoofer
• Power Handling:
  • Peak: 1500 watts
  • RMS: 750 watts
• Impedance: Dual 4 Ohm
• Improved injection-molded SoloKon cone
• Ribbed Santoprene surround
• Ultra strong adhesive and a stitched surround ensure the cone and surround do not separate
• 360-Degree back bracing, along with the SoloKon cone produce zero distortion
• Cast aluminum basket is designed with perimeter venting around the voice coil
• T-cut top plate along the motor structure results in stronger bass, as well as better sound
• Excellent heat dissipation from the solid pole piece and the aluminum basket
• Solid pole piece also assists in the playing of a larger range of low frequencies
• Aluminum basket is non-ferrous and does not effect the strength of the magnet
• Poly-cotton, semi-progressive-roll spider
• Spiralead tinsel leads woven into the spider
• Spring loaded push terminals are compatible with up to 10 AWG wire
• High temperature voice coil
• Large, powerful magnet
• Frequency response: 20-500 Hz
• Sensitivity: 87.1 dB
• Mounting depth: 6-11/16"
• Also found as: 10CVX12-4 ohm, CompVX124, CompVX 124, CompVX 12" 4 ohm, 2010 CVX124
• Authorized Internet Dealer
• 1-year Manufacturer's warranty

General Features:

• BB Series Monoblock Class D Car Amplifier
• RMS Power Rating:
• 4 ohm: 540 watts x 1 chan.
• 2 ohm: 900 watts x 1 chan.
• 1 ohm: 1200 watts x 1 chan.
• Max power output: 2000 watts x 1 chan.
• Pulse Width Modulated MOSFET power supply
• Wired remote bass level control included
• LED power (green) and protect (red) indicators
• Variable Bass Boost (0 to +12 dB bass boost adjustable between 30-80 Hz)
• Preamp RCA outputs to daisy chain multiple amps
• 3-way protection circuitry (thermal, overload, and speaker short protection)
• Heavy duty aluminum alloy heat-sink
• Input sensitivity:
• Low level: 100mV-6mV
• Variable low-pass filter (40-180 Hz, 12 dB/octave)
• Subsonic filter (12 dB variable from 20Hz - 50 Hz)
• Frequency response: 20-30,000 Hz
• 4 gauge power and ground wiring is required for installation. Contact us for information regarding a discount on select amplifier kits from our website when purchased together with this amplifier.
• Dimensions: 12-1/2"W x 8-1/4"D x 2-1/4"H
• Authorized Internet Dealer
• 1-year Manufacturer's Warranty

General Features:

• Complete 4 Gauge 2-Channel Amplifier Installation Kit
• Designed specifically for car audio systems up to 1000 watts RMS
• Premium Powerflex power and ground wire provides optimal power transfer
• Made from Copper-Clad Aluminum for a pure uninterrupted transfer of power and signal
• Belva CCA wire is made from 30% copper while other CCA wire is just 10% copper
• Helical Twist Construction Audio Interconnect RCA cables minimize noise and interference
• In-line Mini-ANL Fuse holder with a 80 amp Mini-ANL fuse offers ideal protection for high powered systems
• Also available as 4-Channel Kit
• Authorized Internet Dealer
• 1-year Manufacturer's Warranty

Kit includes:

1. 17 ft. (5.2 meters) Blue 4 gauge power wire
2. 3 ft. (.91 meters) Black 4 gauge ground wire
3. 17 ft. (5.2 meters) Gray 18 gauge remote lead wire
4. 17 ft. (5.2 meters) Helical Twist 2-channel RCA interconnect cable
5. 20 ft. (6.1 meters) Speaker cable
6. One In-line Mini-ANL Fuse Holder with a 80 amp Mini-ANL fuse
7. One Black rubber firewall grommet
8. One 4 Gauge Blue chrome plated ring terminals
9. One 4 Gauge Black chrome plated ring terminal
10. Three 18 Gauge Blue Spade terminal
11. Two 18 Gauge Black Spade terminal
12. One 18 Gauge Red butt connector
13. Ten 4" Black zip ties