Two NVX Subs + Belva Monoblock Amplifier Upgrade Bundle

General Features:

• 12" Dual 4-ohm VC-Series Car Subwoofer
• Power Handling:
• RMS Power Range: 1000 watts
• Recommended power range: 850 - 1000 watts RMS
• Impedance: Dual 4 ohm
• Woven fiber pressed paper cone
• Custom High Roll foam surround with Nylon stitching
• Die Cast aluminum basket for maximum rigidity
• Dual Poly-Cotton Spiders
• 3" High Temperature Aluminum Voice coil
• 195 oz. Triple stacked High Energy magnet motor structure with protective rubber boot
• Frequency response: 20-200 Hz
• Resonance Frequency (Fs): 26 Hz
• Optimal sealed box volume: 0.85 cubic feet
• Optimal ported box volume: 1.85 cubic feet
• Top-mount depth: 7.02"
• Sensitivity: 85dB
• Authorized Internet Dealer
• 1-year Manufacturer's Warranty

Additional Information:

Why a 12" Subwoofer? Choosing the right subwoofer size can be a difficult decision to make. To help with your decision, you can check out our K-Base Article, that breaks down the difference in the sound generated by the four most common subwoofer sizes. Click Here to read about The Differences In Subwoofer Sizes.

General Features:

• BB Series Monoblock Class D Car Amplifier
• RMS Power Rating:
• 4 ohm: 780 watts x 1 chan.
• 2 ohm: 1260 watts x 1 chan.
• 1 ohm: 1800 watts x 1 chan.
• Max power output: 3000 watts x 1 chan.
• Pulse Width Modulated MOSFET power supply
• Wired remote bass level control included
• LED power (green) and protect (red) indicators
• Variable Bass Boost (0 to +12 dB bass boost adjustable between 30-80 Hz)
• Preamp RCA outputs to daisy chain multiple amps
• 3-way protection circuitry (thermal, overload, and speaker short protection)
• Heavy duty aluminum alloy heat-sink
• Input sensitivity:
• Low level: 100mV-6V
• Variable low-pass filter (40-180 Hz, 12 dB/octave)
• Subsonic filter (12 dB variable from 20Hz - 50 Hz)
• Frequency response: 20-30,000 Hz
• 200-240 Amp in-line fuse required, see our selection of recommended fuse holders
• Dimensions: 13-3/4"W x 8-1/4"D x 2-1/4"H
• Authorized Internet Dealer
• 1-year Manufacturer's Warranty

Note: Internal fuses are not included, so an external 200-240 Amp ANL Fuse is required to safely operate this amplifier.

General Features:

• Complete 4 Gauge 2-Channel Amplifier Installation Kit
• Designed specifically for car audio systems up to 1000 watts RMS
• Premium Powerflex power and ground wire provides optimal power transfer
• Made from Copper-Clad Aluminum for a pure uninterrupted transfer of power and signal
• Belva CCA wire is made from 30% copper while KnuKonceptz, XS Power and other CCA wire is just 10% copper
• Helical Twist Construction Audio Interconnect RCA cables minimize noise and interference
• In-line Mini-ANL Fuse holder with a 80 amp Mini-ANL fuse offers ideal protection for high powered systems
• Also available as 4-Channel Kit
• Authorized Internet Dealer
• 1-year Manufacturer's Warranty

Kit includes:

1. 17 ft. (5.2 meters) Blue 4 gauge power wire
2. 3 ft. (.91 meters) Black 4 gauge ground wire
3. 17 ft. (5.2 meters) Gray 18 gauge remote lead wire
4. 17 ft. (5.2 meters) Helical Twist 2-channel RCA interconnect cable
5. 20 ft. (6.1 meters) Speaker cable
6. One In-line Mini-ANL Fuse Holder with a 80 amp Mini-ANL fuse
7. One Black rubber firewall grommet
8. One 4 Gauge Blue chrome plated ring terminals
9. One 4 Gauge Black chrome plated ring terminal
10. Three 18 Gauge Blue Spade terminal
11. Two 18 Gauge Black Spade terminal
12. One 18 Gauge Red butt connector
13. Ten 4" Black zip ties