NVX VCW122
1000W 12" VC-Series Dual 2-ohm Car Subwoofer
Quantity: 2
General Features:
- 12" Dual 2-ohm VC-Series Car Subwoofer
- Power Handling:
- RMS Power Range: 1000 watts
- Recommended power range: 850 - 1000 watts RMS
- Impedance: Dual 2 ohm
- Woven fiber pressed paper cone
- Custom High Roll foam surround with Nylon stitching
- Heavy Duty Die Cast aluminum basket for maximum rigidity
- Dual Poly-Cotton Spiders
- 3" High Temperature Aluminum Voice coil
- 195 oz. Triple stacked High Energy magnet motor structure with protective rubber boot
- Frequency response: 20-200 Hz
- Resonance Frequency (Fs): 24 Hz
- Optimal sealed box volume: 0.85 cubic feet
- Optimal ported box volume: 1.85 cubic feet
- Top-mount depth: 7.02"
- Sensitivity: 85dB
- Authorized Internet Dealer
- 1-year Manufacturer's Warranty
Additional Information:
Why a 12" Subwoofer? Choosing the right subwoofer size can be a difficult decision to make. To help with your decision, you can check out our K-Base Article, that breaks down the difference in the sound generated by the four most common subwoofer sizes. Click Here to read about The Differences In Subwoofer Sizes.
Check out the VC-Series Owner's Manual
Belva BB5000Dv2
3000W RMS Class D Monoblock BB Series Car Amplifier
Quantity: 1
General Features:
- BB Series Monoblock Class D Car Amplifier
- 300amp ANL fuse and holder included
- RMS Power Rating:
- 4 ohm: 1200 watts x 1 chan.
- 2 ohm: 1800 watts x 1 chan.
- 1 ohm: 3000 watts x 1 chan.
- Max power output: 5000 watts x 1 chan.
- Pulse Width Modulated MOSFET power supply
- Wired remote bass level control included
- LED power (green) and protect (red) indicators
- Variable Bass Boost (0 to +12 dB bass boost adjustable between 30-80 Hz)
- Preamp RCA outputs to daisy chain multiple amps
- 3-way protection circuitry (thermal, overload, and speaker short protection)
- Heavy duty aluminum alloy heat-sink
- Input sensitivity:
- Low level: 100mV-6V
- Variable low-pass filter (40-180 Hz, 12 dB/octave)
- Subsonic filter (12 dB variable from 20Hz - 50 Hz)
- Frequency response: 20-30,000 Hz
- 1/0 gauge power and ground wiring is required for installation. Contact us for information regarding a discount on select amplifier kits from our website when purchased together with this amplifier.
- Dimensions: 20-3/8"W x 8-1/4"D x 2-1/4"H
- Authorized Internet Dealer
- 1-year Manufacturer's Warranty
Belva BAK02BL (Blue)
Primary Color: Blue - Complete 0/1 Gauge Amplifier Wiring Kit with RCA Interconnects (CCA Wiring)
Quantity: 1
General Features:
- 1/0 Gauge 2-Channel Amplifier Installation Kit
- Designed specifically for car audio systems up to 1500 watts RMS
- Premium Powerflex power and ground wire provides optimal power transfer
- Made from Copper-Clad Aluminum for a pure uninterrupted transfer of power and signal
- Belva CCA wire is made from 30% copper while other CCA wire is just 10% copper
- Helical Twist Construction Audio Interconnect RCA cables minimize noise and interference
- ANL Fuse holder with a 150 amp ANL fuse offers ideal protection for high-powered systems
- Authorized Internet Dealer
- 1-year Manufacturer's Warranty
Kit includes:
- 17 ft. (5.2 meters) Blue 1/0 gauge power wire
- 3 ft. (.91 meters) Black 1/0 gauge ground wire
- 17 ft. (5.2 meters) Gray 18 gauge remote lead wire
- 17 ft. (5.2 meters) Helical Twist 2-channel RCA interconnect cable
- One In-line ANL Fuse Holder with a 150 amp ANL fuse
- One Black rubber firewall grommet
- Three 1/0 Gauge Blue chrome plated ring terminals
- One 1/0 Gauge Black chrome plated ring terminal
- One 18 Gauge Blue Spade terminal
- One 18 Gauge Red butt connector
- Eight 6" Black zip ties
