General Features:
- 10" VS-Series Version 2 Dual 2-ohm Car Subwoofer
- Power Handling:
- RMS: 350 - 500watts
- Recommended power range: 175 - 500 RMS
- Aluminum Shorting Ring to prevent rises in inductance
- Non Pressed Paper cone
- High Roll Custom Blended Foam surround
- Stamped Steel basket
- 60oz Y30 High Energy Ferrite Magnet
- Impedance: Dual 2 Ohm
- Mounting depth: 5.00" (127 mm)
- Cutout diameter: 9.15" (236 mm)
- Mounting Diameter: 9.65" (245 mm)
- Overall Diameter: 10.35" (263 mm)
- Frequency Response: 20 - 200 Hz
- Sensitivity: 87 dB (1W/M)
- Xmax: 11mm
- Sd: 33.00 cm²
- Resonance Frequency (Fs): 30 Hz
- Net Weight: 13.15 lbs (5.95 kg)
- Recommended Ported Enclosure: 1.00ft³
- Recommended Sealed Enclosure: 0.70ft³
- Authorized Internet Dealer
- 1-year Manufacturer's Warranty
Priced Individually
Additional Information:
Why a 10" Subwoofer? Choosing the right subwoofer size can be a difficult decision to make. To help with your decision, you can check out our K-Base Article, that breaks down the difference in the sound generated by the four most common subwoofer sizes. Click Here to read about The Differences In Subwoofer Sizes.
JBL MS-A5001
Tested at 750W RMS on our Amp Dyno! (Rated 500W RMS by JBL), 1-Channel Monoblock Class D Car Amplifier with Digital Input Mixer and Graphical Status Display
Quantity: 1
General Features
- MS Series Monoblock Class D Car Amplifier
- RMS Power Rating:
- 4 ohm: 500 watts x 1 chan.
- 2 ohm: 500 watts x 1 chan.
- Sonic Electronix Certified Power Rating*:
- 4 ohm: 468 watts x 1 chan.
- 2 ohm: 692 watts x 1 chan.
- CEA-2006 compliant amplifier
- Digital signal processing amplifier
- Pulse Width Modulated MOSFET power supply
- Wireless Remote bass level input (JBL MS-WBC remote level control sold separately)
- Built-in display shows tone and gain settings
- Soft Start Turn-on
- Mono channel operation
- "Hi2" input setting provides factory system amps with output loads, eliminating "speaker disconnected" error messages
- Speaker-level inputs with signal sensing for automatic turn-on
- Preamp RCA outputs to daisy chain multiple amps
- 3-Way System Protection circuitry (thermal, overload, and speaker short protection)
- Digital input-mixer control eliminates the need for Y adapters
- Heavy duty aluminum alloy heatsink for extreme heat dissipation
- CD for system setup included
- Gold-plated RCA level inputs
- Gold-plated screw terminals
- Input sensitivity: 100mV - 20V
- Signal to Noise Ratio: 80 dB
- Frequency Response: 20 - 270 Hz
- Selectable crossover slopes: 6 dB/oct, 12 dB/oct, 24 dB/oct
- Variable low-pass filter: 97 points from 20 - 140 Hz
- Variable high-pass filter: 97 points from 20 - 140 Hz
- Dimensions: 8-13/16"L x 7-1/4"W x 2-13/16"H
- 4 - 8 gauge power and ground wiring is recommended for installation. Contact us for information regarding a discount on select amplifier kits when purchased together with this amplifier.
- Authorized Internet Dealer
- 1-year Manufacturer's warranty
*The Sonic Electronix Certified Power Ratings listed are based on a test of a specific sample amplifier. Actual power ratings may slightly vary between amps.
NVX XKIT42
100% Copper, 2-Chan. True Spec 4 Gauge Amp Installation Kit w/RCA Interconnect & 40 ft Speaker Cable
Quantity: 1
General Features:
- 4 Gauge 2-Channel X-Series Complete Amplifier Installation Kit
- Designed specifically for car audio systems up to 1000 watts RMS
- Premium power and ground wire provides optimal power transfer
- Made from silver-tinned 100% virgin copper for a pure uninterrupted transfer of power and signal
- Audio Interconnect RCA cables are made with twisted-pair technology for noise reduction
- Solid Brass and satin-chromed ANL/Mini-ANL Fuse holder offers ideal protection for high powered systems
- True-to-Gauge cables/wires meet or exceed the industry standard of copper required for the gauge size
- Strand Count: 1862
- BC-5W2 Compliant
- Authorized Internet Dealer
- 1-year Manufacturer's Warranty
Kit includes:
- 20 ft. (6.1 meters) Frosted Blue 4 gauge power wire with seamless crimp ring terminal
- 3 ft. (.91 meters) Frosted Black 4 gauge ground wire with seamless crimp ring terminal
- 20 ft. (6.1 meters) Clear 18 gauge remote lead wire
- 40 ft. (12.2 meters) Frosted Black/Blue 16 gauge speaker wire
- One 16 ft. (5 meters) 2-channel twisted construction RCA interconnect Cable (NVX XIV25)
- One NVX XMANL04 ANL/Mini-ANL Fuse Holder with 100 amp Mini-ANL fuse
- One Black rubber firewall grommet
- Two 4 Gauge Nickel Plated spade terminals
- Four 18 Gauge Spade terminal
- Two 18 Gauge Red butt connectors
- Four 16 Gauge quick disconnect
- Five 16 Gauge Nickel Plated spade terminals
- Ten 6" Black zip ties



























































