300W Peak (150W RMS) 3.5" Kappa Perfect Series Midrange Car Speakers
• 300 Watts Max Each, 75 Watts RMS Each
• Plus One™ carbon fiber woofer cone
• 3.5 Ohms Impedance
• Sensitivity: 88 dB
Choose from any of our many bundles that include this product for even more savings!
Infinity Perfect 300M with Speaker Installation Kit
Includes: 3.5" 2-Way Speaker, Sound Damping Kit, Installer Panel Removal Tool Kit, Rubber Roller
(135)
$149.95
Looking for the ultimate for in-car audio performance? You've found it. Take your Infinity component system to the next level with these Kappa Perfect 300M speakers.
Built with Infinity's Perfect component systems in mind, the 300M adds yet another layer of depth to already-superbly engineered audio products. Just toggle the crossovers from two-way to three-way on the Kappa Perfect 500, Kappa Perfect 600 or Kappa Perfect 900, add the 300M speakers and get a fuller range of sound.
From the extra-strong cone to the rugged basket that houses everything, the 300M is built to add a tight, accurate midrange response to your system. Linked up with full-size woofers and tweeters, these mid-drivers complete the Perfect systems and produce the sound that others can't. Get even more from your components to make them truly perfect.
These 3.5" midrange speakers are built with Infinity's patented Plus One woofer cone, engineered from carbon fiber to optimize SPL and minimize distortion. An oversized voice coil flattens the frequency response, giving some of the most accurate sound reproduction available. On top of that, they're more reliable, making sure you get more life out of your speakers.
If this is the last piece for your Perfect system, go ahead and add these 300M speakers to your cart. Hear and feel the difference on your next ride.
Priced Per Pair
PROP 65 WARNING: This product can expose you to chemicals including lead and lead compounds, which are known to the State of California to cause cancer or birth defects or other reproductive harm. Wash hands after handling. For more information, visit www.P65Warnings.ca.gov
Internal Product ID:
116845
Its perfect.. really its Perfect!
I bought (2) sets of these midranges for both the front and rear doors of my 2003 Altima. It is paired up with the Infinity Perfect 600 components. The sound is indeed PERFECT! These are an upgrade to the infinity Kappa Co -axials powered by (2) Kenwood Excelon XR40004 set in 2 channel mode to each set of Perfect crossovers. Such beautiful sound .. crisp, not overly bright, detailed, full and Loud!! I believe this is my best set of speakers thus far. I couldn't be happier.
13
found this helpful.Infinity Perfect 300m Midrange Driver
Amazing sound quality. These reproduce sound at amazing volume without distortion. Great weather amplified or not. I installed in my 16 Ram ant it brought the stock head unit to life. I would recommend to anyone who covers quality at a bargain price.
10
found this helpful.Clear and precise
It's amazing. I never heard this size speaker to be so clear and crisp. Love them, I will definitely be buying this brandbin the near future!
10
found this helpful.Outstanding midrange speaker
I’m 62 and have been a car stereo nut since my first Craig Pioneer eight-track in 1974. The Perfect 300M is the best 150 bucks I ever spent on speakers, they are incredible, warm with excellent detail. I’m more of an SQ guy than SPL but they will play loud without any harshness, I couldn’t be happier. These replaced Audison Voce 3 in mids which are very good but don’t hold a candle to the perfects. I installed these in my 17 Outback 3.6R which wasn’t easy but more than worth it. Powered by Kenwood XR600DSP. Highly recommended!
8
found this helpful.Perfect. No pun intended
Sounds great as a center channel speaker in my 2017 Super Duty. Very smooth, blends well with the pillar tweeters to complete the soundstage.
9
found this helpful.Very Detailed!!!
Specs:
3 1/16” cutout diameter (basically a 3” with pressure fit ability)
75 watts RMS per speaker (I have more going to them but no sign of stress crossed over at 250, 280 or 315. I haven’t tried lower due to application)
Dry Carbon Fiber cone (no clear coat/not glossy but looks great)
Sewn-in Tinsel leads (I was so excited to see this tech on a 3.5”)
NO rubber magnet boot cover that I can find/see/touch.
Install:
Currently crossed over at 250-3.6k @24db (Lazy install or I would extend range to 5k)
Running
8
found this helpful.Infinity Perfect 300M Kappa, you know, you know.
I purchased these to throw in my Mustang. Before I did that I built a little box for them, powered them with a nice punch amp and WOW! If you're into audio then you probably know Infinity Kappa is a underrated and they really do sound great. The price IMHO is worth the value you're getting. They feel sturdy, like they'll last a normal person a long time... Anyway these things were clear and loud, I was blown away by these little guys. I now need another pair, sadly I accidently dropped the box and poked hooked in both of them. ???? So they never made it to my Mustang. My garage is a hazard, what can I say.
7
found this helpful.Pure Perfection Amazing Sound!
I would highly recommend these amps to brighten your center stage and raise the quality of mid range sounds, especially voices. I have a 2018 Dodge Charger GT and placed these in the dash (left and right) running of the Alpine V9 pdx and they handle all the power it puts out and love it. I have not tried these speakers off the factory deck but I have read nothing but improvements there also. If you want clear, perfect quality front stage and are running an Amp these baby's are Perfect. In fact if I had more 3.5 speaker areas I would be placing these speakers in all of them they are THAT good!
7
found this helpful.gotta have the mids
I purchased these to fill in the gaps in the Stage, when i hooked these up what a difference in the sound quality. get em while there HOT lol.
7
found this helpful.Very Detailed!!!
Specs:
3 1/16” cutout diameter (basically a 3” with pressure fit ability)
75 watts RMS per speaker (I have more going to them but no sign of stress crossed over at 250, 280 or 315. I haven’t tried lower due to application)
Dry Carbon Fiber cone (no clear coat/not glossy but looks great)
Sewn-in Tinsel leads (I was so excited to see this tech on a 3.5”)
NO rubber magnet boot cover that I can find/see/touch
Install:
Currently crossed over at 250-3.6k @24db (Lazy install or I would extend range to 5k)
Running
7
found this helpful.Best selling similar products
• Peak Power: 75 watts each
• RMS Power: 25 watts each
• 0.75" Silk Dome Tweeter
• Injection Molded, Mica-filled Polypropylene Cone
• Top-mount depth: 1.50"
• 4 Ohms Impedance
• Sensitivity: 83.0 dB @ 1 watt / 1 meter
(9)
$149.99
• 100 watts Peak Each, 35 watts RMS Each
• 3/4" Silk Dome Tweeters
• Polypropylene cone material
• Impedance: 4 ohms
• Sensitivity: 84 dB
• Mounting Depth: 1.65"
(43)
$34.99
• 75 watts Peak Each, 25 watts RMS Each
• Silk Dome Tweeters
• Injection Molded Polypropylene with UV Protection cone material
• Impedance: 3 ohms
• Sensitivity: 89 dB
$79.95
• 300 Watts Max Each, 75 Watts RMS Each
• Plus One™ carbon fiber woofer cone
• 3.5 Ohms Impedance
• Sensitivity: 88 dB
(15)
$149.95
• Peak Power: 80W
• RMS Power: 40W
• PEI Dome Tweeter
• Mounting Depth: 1-3/8"
• Mineral-Filled and Polypropylene Injection Molded Cone
• 4 Ohms Impedance
• Sensitivity: 85dB
(29)
$79.99
Save up to 10 different vehicles in your garage