See all parts that fit your 1995 B4000
5-1/4" DXi Series 2-way Car Speakers, Marine Certified, w/ 6 x 9 " Mounting Adapters
• 135 Watts Max Each, 45 Watts RMS Each
• 3/4" (19mm) aluminum dome tweeter
• Dynamic Balance polypropylene cone
• 4 Ohm Impedance
• Sensitivity: 93dB
• Mounting Depth: 2 5/16"
Polk Audio DXi521 (DXi 521) db521 inspired Car/Marine/ATV Speakers
5-1/4" DXi Series 2-way Car Speakers, Marine Certified for Boats/ATV/Motorcycles - Same Performance as DB521
Quantity: 1
Priced Per Pair
Priced Per Pair
Important Note: Brackets are intended for custom installs and may require some modifications to fit a given speaker and/or location. For example, Most 6.5" will fit, but given the narrow opening to accommodate a 5.25" speaker, the bracket may require said modification. Please plan accordingly and/or consult with your installer.
Best selling similar products
Manufacturer:
Model Number:
DXI521_SA69
Weight:
5.11lbs
Internal SKU:
dxi521_sa69
Internal Product ID:
133941
good product
They worked well for adapting my 6x9 opening to 6.5" component speakers. Had to modify them a little because the holes on my speakers didn't match but the end result was nice and clean. Very sturdy.
80 found this helpful
Better then nothing
this item is exactly as mention and shown. It worked great the only con to this product is the fact when you have to modify it i.e cut out the tweeter part it is pretty hard to do without the right tools. also all the holes dont line up so instead of mounting using all 4 bolts in the corners i had to choose 2 so its not fully attached but it still works.
73 found this helpful
SA69
Solid and clean, perfect if using for 5.25 otherwise have to Cut\saw the opening. I believe these should be sold in separate sizes for use of 5.12 or 6.5 as they are not 1 size fits all. Gave ease of use a 1 for this reason and I needed 6.5 and had to saw the circles bigger.
73 found this helpful
Sufficient, Not Efficient
Exactly sized to match, but the tweeter space is extremely difficult to utilize. I am unimpressed by the lack of instruction as to make that piece come out without the use of a drill &/or dremel which causes innaccurate shapes for the tweeter holes. It cannot be cut out, I am extremely strong, but cuts in those notches are innaccurate and too shallow to be effective. The piece (where a separate tweeter would be) is necessary in the case of coaxial speakers, but needs to be easily removable for the installation of separate speakers. Waste of money for this brand of adapter.
72 found this helpful
not too bad
Not too bad, but installing 6.5"" speakers was a challenge. There are no provisions to make the hole bigger, so I had to hack away at it with my dremel, shaving away a little bit at a time until the speakers fit.
The plastic is nice and thick though, which is great once they are installed, but also make cutting that much more difficult.
70 found this helpful
Works good
The item did what I required it to do, which is fit a 6'5" speaker in a 6'9" box.
72 found this helpful
Fit like a glove.
Fit my 2003 Ram 1500 front doors perfectly. One issue I had with the Alpine component speakers I installed was that the 1.75'' dome tweeter would not fit next to the 6.5'' mid. I had to mount them in the door sail. Quality product made from quality material. Would recommend to a friend.
67 found this helpful
Fit Great
Used the product to install door speakers in an 08 Dodge Avenger for a friend. Speakers fit perfectly in the mold and the mold fit perfectly into the door openings. There is a notch for the wires to fit through. I would recommend for any upgrade installation!
70 found this helpful
Garbage!!!
Won't fit 6.5" speakers, utterly worthless. Don't bother wasting money, make your own adapters out of balsa wood.
68 found this helpful
Good product that suited my needs
These worked out pretty good for me. The only issue I had was I had to make the opening a little larger to fit my 6.5" speakers. Solidly enough made to handle what I throw at them.
67 found this helpful
Cancel
Modern vehicles often require specific brackets, wiring harnesses, and mounting solutions. A fit guide ensures:
Whether you're replacing a factory stereo or upgrading your entire audio system, the Fit Finder eliminates uncertainty.