• 400 Watts RMS
• 1200 Watts Max
• Composite Cone
• Santoprene surround
• Fiberglass-Reinforced ABS Basket
• IP56 Ultra Marine Certified
• Vented Pole and Basket Structure
Polk Audio MM 1042 SVC (MM1042SVC)
1200W Peak (400W RMS) 10" MM1 Series Single 4-Ohm Car Subwoofer (MM 1042SVC)
1.2 Cu Ft - Single 10" Sealed MDF Subwoofer Enclosure (Belva MDFS1012)
10-inch Sealed Car Sub Box Made with 3/4" MDF and lined w/ Polyfil (1.2 cu ft airspace 10SQTC)
You've got an awesome subwoofer there, pal. But where's it gonna go? You can't just throw that thing in the trunk and call it a day. Don't worry, Belva's got your back. With superior construction, great features and everything you need for bass, you'll be ready to pass up that entry-level box you've been eyeballing.
You get quality boxes with solid 3/4" MDF because nothing else will do the job right. You want to flex your windshield, not your box's innards. You get polyfill built into the box, making sure your subs perform perfectly. On top of that, you get a box that's CARB Phase 2 Compliant, meaning your box won't emit as much nasty formaldehyde as the competition. Better for your bass and better for you.
Look, nobody buys a subwoofer and says, 'Aw man, I just want a teeny bit of thump.' Naw man, you want something that kicks you in the chest, but you need a box that's gonna put up with it. That's where Belva comes in. While other brands use less-than-optimal 1/2-inch MDF, we've got 3/4-inch MDF to make sure you get all the bass you can handle. Why risk a busted box? Belva's the obvious choice when it comes to giving your sub a good home and giving you the low end you're looking for.
Complete 8 Gauge Amplifier Wiring Kit with 2-Channel RCA Interconnects (CCA Wiring)
1500W Max Armor Series Class A/B Monoblock Amplifier with Remote Subwoofer Level Control Included
(newest, current model)
(previous model, replaced by Polk Audio MM1042SVC 10” 1200w Car Subwoofer+Sealed Sub Box+Amplifier+Amp Kit)
(previous model, replaced by Polk Audio MM1040DVC)
Overall rating distribution
By feature average rating
August 14, 2012
Don't know what the other guy is talking about.
This kit was awesome and included with my package that I bought. In comparison to others for the same price, there is simply not a comparison and the other review is just wrong on so many levels I felt compelled to write this.
The reality is there are a lot of real shoddy amp kits and wire as a whole being used in car audio in terms of cheap amp kits that have over-insulating wires and fake gauge ratings, huge amounts of aluminum, lousy RCA cables, fuse holders and other accessories. BUT and a BIG BUT, this kit excels in those areas where others fall flat on their face. I have bought a few inexpensive 8 gauge kits in my day and XScorpion, Raptor, Install Bay and others haven't even given me the 8 gauge of wire that I paid for, and in some cases gave me wire that heated up to a dangerous level due to the actual make up of the wire.
I also literally laughed when I see that the other reviewer was intending to use spade terminals to connect his amp power and ground wire... It is for the SPEAKER wire knucklehead :-). I am an installer and the smaller accessories work just fine when you use them correctly. Most amps will still work with them when used with the speaker wire. Of course one can be used for the remote wire connection to the amp and the other end with the butt connector being used to connect to the stereo. The funny thing is, if you do not need them, who cares? It is like ordering this kit for a compact car or single cab pickup. You will not use all of the power wire for these applications, so do you complain that the manufacturer gave you extra wire? That just made me laugh.
Now, onto the other accessories. The AFS fuse and holder that are included are so far superior to others in this price range and the amount of copper (albeit CCA) is much better than others in the price range. Lastly, the RCAs included are awesome for the price. I cannot find ANYTHING to complain about here for $21.99.
All in all, you will not get a better value for the money.
January 31, 2014
Good kit for basic setups. Using it right now in my mothers system powering a simple 12. Could handle more if needed.
Pros: Handles power, Wires are HQ, More copper than rubber, Wires are good length, Fuse is HQ, Comes with lots of ties and rubbers.
I would recommend this kit to anyone who has a simple system. All around good kit.
December 19, 2013
I used this kit to install a 2 channel Boss amp. The quality of the pieces in this kit is five stars, but I'm giving it 4 because it is my belief that to do a clean install you need (4) 8 gauge terminals (one at the batt, one at the amp, one at ground, one at the amp), not just two. I had to spend an extra six bucks at Orchard for the extra terminals, but since the cost of the kit here at Sonic was only $20 at the time, it was still a good deal.
June 22, 2013
Exactly what you need
Comes with everything you need, literally. Ring terminals are good quality, insulation is very good quality on the wires, fuse is good quality, currently connected 2x 600 watt Pioneer 6x9 speakers to a 450 watt amp (250RMS) with this wiring kit. Plenty of length to get from the battery to the back of my car. For 21$ this is a steal! Does its job, does it well. Highly recommend this, you won't beat this price for everything you get.
October 24, 2013
Price is right
This wiring kit is very good quality. Although this was my first subwoofer install, I consider myself an expert when it come any kind of stereo hookup. This kit comes with everything you will need for a professional install. I installed a MTX self contained in the rear of my 1999 Explorer Sport. This kit made eazy.
Best selling similar products
• Bracket/Flush Mount Rearview Backup Camera
• Waterproof IP67 Compact Design
• Resolution: 720 x 480
• Adjustable 170 degree Viewing Angle
• RMS: 300W x 1 @ 4 ohms, 500W x 1 @ 2 ohms
• Total Peak Power: 1000W
• CEA-2006 Compliant Amplifier
• 4-Channel Speaker-Level Inputs
• Heavy Duty Aluminum Alloy Heat-Sink
• Dimensions: 7-7/8"W x 7-7/8"L x 2-3/16"H
• ASK Long Range Technology
• 66 Bit Random Code Hopping
• Factory keyless door locking before and after start
• Code Learning / Anti-scan Receiver
• Peak Power: 270W Each
• RMS Power: 90W Each
• 2-Way Coaxial
• 4 ohms Impedance
• Polypropylene Cone Material
• Nitrile Butadiene Rubber Surround
• 20mm Silk Dome Tweeter
• 340W Max Each, 60W RMS Each
• 1" Polypropylene Balanced Dome Tweeter
• Graphite-Injected Reinforced Polypropylene Cone
• 4 ohms Impedance
• Mounting Depth: 2.24"
Internal Product ID: