2) Kicker 44CWCD124 CompC 12" Subs+Sealed Enclosure+500W Mono Amplifier+Amp Kit

Product Details:

• 12" Dual 4 ohm CompC Series Subwoofer
• Power Handling:
• Peak: 600 watts
• RMS: 300 watts
• Injection Molded Polypropylene Cone
• Ribbed Polyurethane Surround
• Spring-Loaded Speaker Terminals
• High Temp Voice Coil
• Stamped Steel Basket
• High Temperature Voice coil
• 10.3 mm Xmax
• Ferrite magnet motor structure
• Frequency Response: 27 - 500 Hz
• Resonance Frequency (Fs): 30 Hz
• Sensitivity: 88.3 dB
• Sealed box volume: 1.25 cubic feet
• Ported box volume: 1.75 cubic feet
• Top-mount depth: 5-3/8"
• Cutout diameter: 11"
• Authorized Internet Dealer
• 1-year Sonic Electronix Warranty



Priced Individually

Built for Bass

You've got an awesome subwoofer there, pal. But where's it gonna go? You can't just throw that thing in the trunk and call it a day. Don't worry, Belva's got your back. With superior construction, great features and everything you need for bass, you'll be ready to pass up that entry-level box you've been eyeballing.

You get quality boxes with solid 3/4" MDF because nothing else will do the job right. You want to flex your windshield, not your box's innards. You get polyfill built into the box, making sure your subs perform perfectly. On top of that, you get a box that's CARB Phase 2 Compliant, meaning your box won't emit as much nasty formaldehyde as the competition. Better for your bass and better for you.

	Look, nobody buys a subwoofer and says, 'Aw man, I just want a teeny bit of thump.' Naw man, you want something that kicks you in the chest, but you need a box that's gonna put up with it. That's where Belva comes in. While other brands use less-than-optimal 1/2-inch MDF, we've got 3/4-inch MDF to make sure you get all the bass you can handle. Why risk a busted box? Belva's the obvious choice when it comes to giving your sub a good home and giving you the low end you're looking for.

General Features:

• Dual Sealed 12" Enclosure
• Internal box volume: 2.5 cubic ft. total air space - 1.25 cubic ft. per chamber.
• High Quality 3/4" MDF Construction
• Durable black carpeting
• Pre-lined with Poly-Fil
• Seams are fully caulked for better efficiency
• 2 Separate chambers allowing each subwoofer its own air space
• Gold post terminals for clean and easy wiring access
• Box Dimensions: 28" Wide, 14" Depth, 14" Height
• 30 Day return policy

General Features:

• 16 Gauge Speaker Wire
• High strand count for maximum flexibility
• Ultra-flexible PVC blended jacket for easy installation
• Packed in resealable bag
• Length: 7m (23 Ft)
• Also available in 12 Gauge
• Authorized Internet Dealer
• 1-year Manufacturer's Warranty

Product Details:

• 4 Gauge 2-Channel Complete Amplifier Installation Kit
• Designed for car audio systems up to 1200 watts RMS
• Made from 100% Copper-Clad Aluminum (CCA)
• Satin chromed Mini-ANL fuse holder offers ideal protection for high-powered systems
• Full spec power and speaker wire meet or exceed American Wire Gauge standards
• RCA Interconnect Cable
• Twisted-pair construction provides protection against interference
• Split-tip silver-plated ends offer high-quality performance
• Molded ends equipped with colored channel identifiers for easy recognition
• Includes an assortment of wire termination hardware and cable ties
• Authorized Internet Dealer
• 1-year Manufacturer's Warranty

Kit includes:

1. 17 ft. Gray 4 gauge power wire
2. 3 ft. Black 4 gauge ground wire
3. 17 ft. Gray 18 gauge remote lead wire
4. 20 ft. 16 gauge speaker wire
5. One 17 ft. 2-channel twisted-par construction RCA interconnect Cable
6. One Mini-ANL Fuse Holder with 80 amp Mini-ANL fuse
7. One Black rubber firewall grommet
8. Two 4 Gauge Chrome Plated ring terminals
9. Five 16 Gauge Spade terminal
10. One 18 Gauge Red butt connectors
11. Ten 4" Black zip ties

General Features:

• Crunch Power Drive PD 1500.1
• Class-A/B 2-Ohm Stable Monoblock Amplifier
• Max Power Rating:
• 4 ohm: 750 watts x 1 chan.
• 2 ohm: 1500 watts x 1 chan.
• Total power output: 1500 watts
• Pulse Width Modulated MOSFET power supply
• LED power (green) and protect (red) indicators
• Soft start turn-on
• 2 or Mono channel operation
• Preamp RCA outputs to daisy chain multiple amps
• 3-way protection circuitry (thermal, overload, and speaker short protection)
• Dual speaker terminals simplify the hookup of multiple speakers
• Quick Thermal Dispersion Technology adds more mass to aluminum heat sink to run cool
• Input sensitivity: 0.2V - 6V
• Variable low-pass filter: 40 - 300 Hz
• Subsonic Filter: 10 - 40 Hz
• Variable Bass Boost: 0 to +12 dB bass boost
• 4 gauge power and ground wiring is recommended for installation. Contact us for information regarding a discount on select amplifier kits from our website when purchased together with this amplifier. Click Here for our contact information.
• Dimensions: 11.4"W x 17"L x 3.8"H
• Authorized Internet Dealer
• 1-year Manufacturer's Warranty