(2) MTX 3512-02 12" 1000w Car Subwoofers+Sealed Sub Box+Mono Amplifier+Amp Kit

Product Details:

• 12" Single 2 ohm 35 Series Subwoofer
• Power Handling:
• Peak: 500 watts
• RMS: 250 watts
• Polypropylene Cone
• Rubber Surround
• Inverted apex surround for more air and higher SPL
• Plateau venting for mechanical cooling process
• 1.75" High Temperature Voice coil
• 8.128 mm Xmax
• 56 oz. Single Stacked magnet motor structure
• Frequency Response: 26 - 130 Hz
• Resonance Frequency (Fs): 30.4 Hz
• Sensitivity: 86 dB
• Recommended sealed box volume: 1.0 cubic feet
• Recommended ported box volume: 2.32 cubic feet
• Top-mount depth: 5.313"
• Cutout diameter: 11.125"
• Authorized Internet Dealer
• 1-year Manufacturer's Warranty



Priced Individually

Built for Bass

You've got an awesome subwoofer there, pal. But where's it gonna go? You can't just throw that thing in the trunk and call it a day. Don't worry, Belva's got your back. With superior construction, great features and everything you need for bass, you'll be ready to pass up that entry-level box you've been eyeballing.

You get quality boxes with solid 3/4" MDF because nothing else will do the job right. You want to flex your windshield, not your box's innards. You get polyfill built into the box, making sure your subs perform perfectly. On top of that, you get a box that's CARB Phase 2 Compliant, meaning your box won't emit as much nasty formaldehyde as the competition. Better for your bass and better for you.

	Look, nobody buys a subwoofer and says, 'Aw man, I just want a teeny bit of thump.' Naw man, you want something that kicks you in the chest, but you need a box that's gonna put up with it. That's where Belva comes in. While other brands use less-than-optimal 1/2-inch MDF, we've got 3/4-inch MDF to make sure you get all the bass you can handle. Why risk a busted box? Belva's the obvious choice when it comes to giving your sub a good home and giving you the low end you're looking for.

General Features:

• Dual Sealed 12" Enclosure
• Internal box volume: 2.5 cubic ft. total air space - 1.25 cubic ft. per chamber.
• High Quality 3/4" MDF Construction
• Durable black carpeting
• Pre-lined with Poly-Fil
• Seams are fully caulked for better efficiency
• 2 Separate chambers allowing each subwoofer its own air space
• Gold post terminals for clean and easy wiring access
• Box Dimensions: 28" Wide, 14" Depth, 14" Height
• 30 Day return policy

Product Details:

• 4 Gauge 2-Channel Complete Amplifier Installation Kit
• Designed for car audio systems up to 1200 watts RMS
• Made from 100% Copper-Clad Aluminum (CCA)
• Satin chromed Mini-ANL fuse holder offers ideal protection for high-powered systems
• Full spec power and speaker wire meet or exceed American Wire Gauge standards
• RCA Interconnect Cable
• Twisted-pair construction provides protection against interference
• Split-tip silver-plated ends offer high-quality performance
• Molded ends equipped with colored channel identifiers for easy recognition
• Includes an assortment of wire termination hardware and cable ties
• Authorized Internet Dealer
• 1-year Manufacturer's Warranty

Kit includes:

1. 17 ft. Gray 4 gauge power wire
2. 3 ft. Black 4 gauge ground wire
3. 17 ft. Gray 18 gauge remote lead wire
4. 20 ft. 16 gauge speaker wire
5. One 17 ft. 2-channel twisted-par construction RCA interconnect Cable
6. One Mini-ANL Fuse Holder with 80 amp Mini-ANL fuse
7. One Black rubber firewall grommet
8. Two 4 Gauge Chrome Plated ring terminals
9. Five 16 Gauge Spade terminal
10. One 18 Gauge Red butt connectors
11. Ten 4" Black zip ties

General Features:

• 16 Gauge Speaker Wire
• High strand count for maximum flexibility
• Ultra-flexible PVC blended jacket for easy installation
• Packed in resealable bag
• Length: 7m (23 Ft)
• Also available in 12 Gauge
• Authorized Internet Dealer
• 1-year Manufacturer's Warranty

Product Details:

• Hifonics Zeus ZXX-1200.1D
• Class-D 1-Ohm Stable Monoblock Amplifier
• Peak Power Rating:
• 4 ohm: 400 watts x 1 chan.
• 2 ohm: 600 watts x 1 chan.
• 1 ohm: 1200 watts x 1 chan.
• Total power output: 1200 watts
• CEA-2006 Compliant Amplifier
• Pulse Width Modulated MOSFET power supply
• Wired remote bass level control included
• LED power (green) and protect (red) indicators
• Mono channel operation
• Speaker-level (high-level) inputs
• Preamp RCA outputs to daisy chain multiple amps
• 3-way protection circuitry (thermal, overload, and speaker short protection)
• Heavy duty aluminum alloy heat-sink
• Frequency Response: 40 - 300 Hz
• Signal to Noise Ratio: >95 dB
• Variable low-pass filter: 40 - 300 Hz, 12 dB/octave
• Subsonic filter: 10 - 40 Hz , 12 dB/octave
• Variable Bass Boost: 0 to +12 dB bass boost at 50 Hz
• Fuse Rating: 80 A x 1
• 4 gauge power and ground wiring is recommended for installation. Contact us for information regarding a discount on select amplifier kits from our website when purchased together with this amplifier. Click Here for our contact information.
• Dimensions: 12.6"W x 10"L x 2.4"H
• Also found as: ZXX12001D, ZXX-12001.D, ZXX 1200-1D, ZXX 1200 1 D, Zeus 1200W
• Authorized Internet Dealer
• 1-year Manufacturer's Warranty