Package includes 2 12" subwoofers, 2000 Watt Amplifier, Vented Box and Wire Kit
• 1200W Peak
• 600W RMS
• Anodized Aluminum Heat Sinking Cone
• Santoprene Vertical Attach Surround Technique
• 4-Layer 2-1/2" Voice Coil
• Proprietary Spider Venting
Sonic Electronix is now carrying the brand new line of Rockford Fosgate Punch P3 Series Car Audio Subwoofers. The P3D2-12 Punch Series 12" Subwoofer has a peak power rating of 1200 watts and a RMS rating of 600 watts. This sub will produce some earth shaking bass and is constructed with an anodized aluminum cone and a vertical attach surround technique. This woofer is also equipped with a 2.5" Voice coil and a protective PVC textured magnet cover. Add some bumps in your trunk and enhance your cars stereo system with this Rockford Fosgate Punch Series Subwoofer.
While built on a long standing history of performance, the punch series woofers can deliver not only the output to satisfy you when you want it loud but maintain a level of sound quality for when you really want to "listen" to your music. Taking many design cues from the Power Series, Rockford Fosgate engineers continue to improve the Punch Series year after year making it one of the most sought after woofer lines for music and bass enthusiasts alike. With features like Dual tear & fatigue resistant poly-cotton spider for high strength and anodized aluminum voice coil formers to handle heat buildup in the motor structure under full power situations, these drivers are designed to perform.
Anodized Aluminum Voice Coil Former
By using an anodized aluminum voice coil former on their subwoofers, Rockford Fosgate is able to dissipate heat from the voice coil more efficiently. A hot voice coil can melt the adhesive bonds, which will lead to eventual subwoofer failure. The aluminum voice coil former acts as a heat-sink to dissipate thermal build-up on the voice coil cool during high SPL conditions.
Conforms to CEA-2031
Rockford Fosgate has built this subwoofer to conform to the CEA-2031 loudspeaker power handling industry standards. This means that you can trust the subwoofer to have the capacity to safely handle the continuous (RMS) power rating. Having a CEA-2031 power handling is important when matching a subwoofer to an amplifier because the power ratings are accurate.
Stitched Tinsel Leads
To improve the reliability and performance by reducing fatigue and possible shorting, Rockford Fosgate has stitched the tinsel leads to the spider. The multipoint periodic stitching lead wires reduce the mass of the tinsel leads to spread the stress over a greater area. This improves the reliability and performance of the subwoofer.
VAST: Vertical Attach Surround Technique
In order to increase the surface area of the cone without causing any installation issues, Rockford Fosgate designed the Vertical Attach Surround Technique (VAST). By redesigning the manner in which the surround adheres to the basket, these speakers gain up to 25% more effective radiating cone area. This improves the nominal efficiency and maximum output.
Rockford Fosgate Punch P3D2-12
1200W Max (600W RMS) 12" Punch P3 Series Dual 2-Ohm Car Subwoofer (Newest Model)
Quantity: 2
![]() |
Priced Individually
Belva BBX212BK (BLACK)
3.70 Total Cu Ft - Dual 12" 3/4" MDF Ported Subwoofer Box Enclosure with Custom Black Baffle
Quantity: 1
Autotek TA2050.1 (TA-2050.1)
2000W MAX Class D TA Series Monoblock Amplifier, 1 ohm stable
Quantity: 1
Belva BAK42BK
4 Gauge Premium (CCA) Copper Clad Aluminum Complete 2-Channel Amplifier Wiring Kit with RCA for Amplifiers up to 1200 Watts - GRAY
Quantity: 1
Manufacturer:
Model Number:
(2) P3D2-12,BAK42BK,TA 2050.1,BBX212BK
Weight:
114.40lbs
Internal SKU:
11p3d212_bbx212bk_ta20501
Internal Product ID:
164303
Quality Product
Works very well with my Rockford Fosgate sub system in my car.
81
found this helpful.good deal!
Pretty decent value for the price. Worked out great, thanks.
78
found this helpful.Usable
The wiring has done me right so far but the only thing I don't like is the speaker wires. You have to carefully split it so the wire doesn't show. Other than that minor thing everything was great and a great value!
76
found this helpful.Accessories for product
Just what I needed and made installation so much easier. Thanks
63
found this helpful.price is right
the price is right for this setup. the ground wire and the power wire are to big for my amp but i made them fit. better to have to much than not enough so if i upgrade to a larger amp it will be fine.
68
found this helpful.awesome products
I run 2 12inch audiobahn exursions on this amp and it pushes them very well. The size is perfect not to big and fits right unerneath the seat or small space. The best part is it stays pretty cool even after running most the day.
57
found this helpful.sounds great
Box sounds great. Only problem is the trim ring on the Hifonics subs wouldn't fit without a little grinding.
58
found this helpful.good wires
I like the wire kit I got with my amp it seems to be holding up goo it handles the power of the amp I got but I would of gave it 5 stars all the way around but I wold of like the ground at less 2 more feet for good use but over all its a nice kit
53
found this helpful.Great price
Speaker box is very nice the only problem I had was the face plate was to small for my speakers I had to cut a bigger hole so they can fit.So watch out for the size,dimension on this product. I would recommend this product
53
found this helpful.Great Subwoofer
Hi all,
I bought a used older model of the P3 but instead was sent the brand new Punch P3D212! So anyways, I have this in a 2.2-2.3 net cubic foot box tuned to about 30 hz and this thing slams in the 35-40hz range. It just goes bananas and sounds great as long as the amp you are using is clean. If this is one of your choices for a subwoofer, you will not be disappointed, however I know this isn't the best subwoofer ever.
The ONLY thing I would look for is that the glue connecting the spider to the cone began to crack, causing a rattle in the subwoofer, but I put some CA glue as well as GOOP around that area and all is well now.
48
found this helpful.Best selling similar products
Belva BPKG212v2 Complete Amplified Bass Package
• Works with both Factory and Aftermarket Audio Systems
• Dual 12" Belva Subwoofers
• Monoblock Amp with Bass Knob
• Ported Enclosure
• Complete Amp Wiring Kit
(75)
$249.99
MTX Audio TNP212D2 Terminator Dual Subwoofer Package + Amplifier
• 800W Peak (2 Subs)
• 400W RMS (2 Subs)
• 48oz. Magnet
• Terminator Series Class D Monoblock Car Amplifier
• Heavy 5/8" MDF Construction
• Black Carpeting
(150)
$279.95
Belva BPKG110v2 Complete Amplified Bass Package
• Works with both Factory and Aftermarket Audio Systems
• Single 10" Belva Subwoofer
• Monoblock Amp with Bass Knob
• Ported Enclosure
• Complete Amp Wiring Kit
(24)
$129.99
• XED Series Bass Package
• Two 12" Subwoofers with 2" Voice Coill
• 400W RMS Monoblock Amplifier
• Carpeted and Embroidered Enclosure
(1)
$329.99
• RMS: 1250 x 1 @ 4 ohms, 1950W x 1 @ 2 ohms, 2700W x 1 @ 1 ohm
• Total RMS Power: 2700W
• CEA-2006 Compliant
• Wired Bass Remote Included
• Efficient Class D Design
• Dimensions: 13.7"W x 5.4"D x 2.0H
• RMS Power: 1200 Watts Each
• 3” 4-Layer High-Temperature Black Aluminum Voice coil
• Carbon Fiber Enhanced Non-Pressed Paper Cone
• Custom High Roll foam surround with black nylon stitching
• 202 oz. Triple-stacked High Energy ferrite magnet
• Die Cast aluminum vented basket
(141)
$621.97
Save up to 10 different vehicles in your garage