Microprocessor-Controlled 80 Amp, Dual Sensing Smart Relay Battery Isolator
• 80 Amp Battery Isolator
• 80 Amps at 12V Continuous
• 150 Amps Surge
• Switching Power: 10 - 16 VDC
These Smart Battery Isolators are designed specifically for use in multi-battery applications. The XSBi series of isolators primarily monitors the main starter battery voltage. Once the starter battery voltage reaches 13.2 volts, the solenoid automatically connects the auxiliary battery to the charging system. When the whole system drops below 12.7 volts, the solenoid opens and isolates the starter battery from the auxiliary battery. This ensures you should never have a drained starter battery again.
These smart battery Isolators also help lengthen the life of your starter battery. When two-vehicle batteries are wired in parallel they have a tendency to charge and drain one another. All relays disconnect the batteries when the engine is turned off. This prevents excessive wear and lengthens the life of the batteries. When you turn your engine back on, the batteries will be connected without any voltage drop to the second battery.
This smart isolator is a must when adding a second battery to your vehicle. In your car, you might be looking to add a second battery when installing a competition-grade amplifier. High power output amplifiers require a lot of power from your charging system. Upgrading it with a second battery will be a necessary addition to your car. For UTVs and ATVs, their batteries are too small to power any additional accessories like stereos and speakers. Therefore, if you want to add those additional accessories you will need an additional battery as well. In both of these applications, this smart isolator would be perfect to monitor your batteries’ voltage.
The NVX XSBi Series includes a manual override function that allows you to disconnect or link the two batteries with the push of a button. This is necessary for emergency situations like jump-starting your vehicle. In this case, you would want to use the override function to manually disconnect the batteries from one another so you could just power the main battery to start your vehicle.
Internal Product ID:
165465
Easy setup
Works great and was easy to install! Haven't had it for very long but will assess durability once I've had it for awhile.
Easy install, Worry-free battery isolation
I recommend battery isolators to every customer who has an auxiliary battery system installed, and have been using the NVX ones since opening the doors of my business two years ago. Love the quality, and now the smart isolators have made the process even easier, with no need to run a separate auxiliary wire anymore. Simply connect to primary battery, auxiliary battery, and ground. ¡Voila! Easy peasy
Best selling similar products
• 200 amp Battery Isolator and Relay
• Prevents primary battery discharge
• Maximum current transfer
• Extends battery life
• Universal 12V Applications
(8)
$55.99
• Battery Isolator and Relay
• 500 Amp
• Prevents Primary Battery Discharge
• Maximizes the Current Transfer
• Extends Battery Life
• Universal 12V Applications
(35)
$65.99
• Prevents Primary Battery Discharge
• Maximum Current Transfer
• Ideal for 2nd Audio Battery Isolation from Vehicle Systems
• 500A Constant/ 900A Peak
(1)
$87.99
• 80 Amp Battery Isolator
• 80 Amps at 12V Continuous
• 150 Amps Surge
• Switching Power: 10 - 16 VDC
(9)
$14.99
• 80 Amp Battery Isolator
• 80 Amps at 12V Continuous
• 150 Amps Surge
• Switching Power: 10 - 16 VDC
(2)
$29.99
Save up to 10 different vehicles in your garage