Ground Termination Block with Two 1/0-8 Gauge Inputs
Product highlights
• GT2 Ground Termination Block, (2) 1/0-8AWG in
• Dual inputs allow for a single ground point for multiple amplifiers
KICKER® brass hardware uses Versa-Gauge™ connection points with oversized convex screws for rock-solid connections. Use multiple gauge wires with no adapters needed. You get a clean, sharp install that lasts for years.
|
(newest, current model)
|
|
(previous model, replaced by Kicker GT2 (46GT2))
|
Internal Product ID:
173295
| 5 star |
|
100% |
| 4 star |
|
0% |
| 3 star |
|
0% |
| 2 star |
|
0% |
| 1 star |
|
0% |
| Durability | ||
| Value | ||
| Features | ||
| Design | ||
| Usability |
Best price I found
I ended up buying the Kicker ground for less than $20 with a special coupon. Best price I could find. I only need a single ground but having room for 1 more ground if I add a capacitor or 2nd amp would be helpful.
Verified purchase
22
found this helpful.Best selling similar products
• One 1/0 Gauge Input
• Two 4 Gauge or 8 Gauge Output
• Satin Chrome Plated Terminals
• All Brass Hardware
$15.99
• Premium Series Distribution Block
• MAXI Fuses
• 1/0 or 4 AWG Input
• 4 or 8 AWG Outputs
• Nickel Plated • Includes Grommets and Wrenches
$39.99
• HPM Series Power or Ground Distribution Block
• Two 1/0 Gauge or 4 Gauge Inputs
• Four 4/8 Gauge Outputs
• Multiple Input/Output Design
• Protective Cover Included
• Corrosion Resistant Satin Chrome Finish
$23.99
• HPM Series Fused Power Distribution Block
• Two 1/0 Gauge or 4 Gauge Inputs
• Four 4/8 Gauge Outputs
• Multiple Input/Output Design
• Protective Cover Included
• Corrosion Resistant Satin Chrome Finish
$33.99
• PRO Series Maxi Fuse Power Distribution Block
• Two 1/0 Gauge Inputs
• Four 4/8 Gauge Outputs
• High Power MAXI Fuse Protection
• Deep Wire Recesses
• High Quality ShocKrome Plating
• Snap-Off Cover
$32.99
• Independently MANL fused outputs
• (1) 1/0 AWG - 8 AWG In
• (3) 4 AWG - 10 AWG Out
• Nickel finish for durability
• Compact design for simpler installation
• Solid brass construction for maximum conductivity
$26.99
• Easy-to-use bus/bar distribution block
• 6 Ring Terminal Connections
• Use when installing multiple amps
• 3/4" PVC body
• 1/4" aluminum bus bar
• 3/16" Clear acrylic cover
• Use as a grounding block or positive distribution
$49.99
• MANL 4 Position Distribution Block
• Small Footprint
• 1) 1/0 AWG Input
• (4) 4/8 AWG outputs
$36.00
• Versatile Power Distribution Block
• Used For Ground Or +12V Connections
• Three 1/0 Or 2 Gauge Connections, Plus Three 4 Or 8 Gauge Connections
$64.99
• PRO Series Power Distribution T-Block
• Three 4 Gauge Inputs/Outputs
• Daisy Chain Design
• Deep Wire Recesses
• Oversized Set Screws
• Corrosion Resistant ShocKrome-Plated
• Protective Cover Included
$10.99
