Garage
Shop

Rockford Fosgate P300X1 + JL 10W1v32 Sub + Free Sealed Enclosure and Amp Kit

Rockford Fosgate Monoblock Amplifier + JL Audio 10W1v32 2 ohm Sub + Belva MDFS10 Sealed Enclosure + Amp kit

Lowest price in 30 days
highlight-star-icon

• RMS: 200W x 1 @ 4 ohm, 300W x 1 @ 2 ohm
• Total RMS Power: 300W
• Built-in NOMAD Circuit Protects Amplifier
• Tuned Bass EQ: 0 to +18 dB
• Cast Aluminum Heatsink with Dynamic Thermal Management
• Dimensions: 9-7/8"L x 7-3/4"W x 2-3/8"H

Learn more about the p300x1_10w1v32_mdfs10_bak42

We apologize

This item has been discontinued

NVX - Worth the Envy - Direct to Consumer Car Audio

Description


Rockford Fosgate brand icon

Authorized dealer

Rockford Fosgate Punch P300X1

300W RMS Class AB Punch Series Monoblock Car Amplifier
Quantity: 1

Product Details:

  • Punch Series Class A/B 2 ohm Stable Monoblock Amplifier
  • RMS Power Rating:
    • 4 ohm: 200 watts x 1 channel
    • 2 ohm: 300 watts x 1 channel
  • Total RMS power output: 300 watts
  • Power, protect, thermal, input, and output clip LED visual indicators
  • Wired bass level remote control with optional Rockford Fosgate PLC2
  • Speaker-level (high-level) inputs (Requires adapter like the Kicker KISL)
  • 1 pair of pre-amp outputs
  • On-board Punch EQ with +18dB boost @ 45Hz
  • 12dB/octave Butterworth crossover
  • High level input capable with Auto Turn-On circuit
  • Short circuit and over current protection
  • Muted turn on
  • 2/4 channel input switch
  • Features C.L.E.A.N. Set-up
  • Cast aluminum heatsink
  • Stealth top mounted control panel
  • CTA-2006 compliant
  • Input sensitivity: 150mV - 12 volts
  • Frequency Response: 20 - 20000 Hz
  • Total Harmonic Distortion (THD): 1%
  • Signal to Noise Ratio: 85 dB
  • Variable low-pass filter: 50 - 250 Hz
  • Variable Bass Boost: 0 - 18 dB
  • Fuse Rating: 50A
  • 8 AWG gauge amplifier wiring kit is recommended for installation
  • Dimensions: 7.76" L x 9.86" W x 2.38" H
  • Authorized Internet Dealer
  • 1-year Manufacturer's Warranty
  • MFR #: P300X1

JL Audio 10W1v3-2

300W RMS 10" W1v3 Series Single 2-ohm Subwoofer
Quantity: 1

Product Details:

  • 10" Single 2 ohm W1 v3 Series Subwoofer
  • Power Handling:
    • RMS: 300 watts
  • Mica Injected Polypropylene - MIPP Cone
  • Rubber Surround
  • DMA Optimized Motor
  • Elevated Frame Cooling design
  • Patented FCAM technology
  • Vented Reinforcement Collar (VRC) composite structure
  • 11 mm Xmax
  • Resonance Frequency (Fs): 25.23 Hz
  • Sensitivity: 83.9 dB
  • Recommended sealed box volume: 0.55 cubic feet
  • Recommended ported box volume: 0.90 cubic feet
  • Top-mount depth: 4.6"
  • Cutout diameter: 9.0625"
  • Authorized Internet Dealer
  • Does not includes subwoofer grille
  • 1-year Manufacturer's Warranty

  • Priced Individually

Single 10" Sealed MDF Subwoofer Enclosure (Belva MDFS10)

10-inch Sealed Car Sub Box Made with 3/4" MDF and lined w/ Polyfil (0.77 cu ft airspace 10SQTC)
Quantity: 1

General Features:

  • Single Sealed 10" Enclosure
  • Internal box volume: 0.77 cubic ft
  • High Quality 3/4" MDF Construction
  • Durable black carpeting
  • Pre-lined with Poly-Fil
  • Seams are fully caulked for better efficiency
  • Gold post terminals for clean and easy wiring access
  • Box Dimensions: 12-1/2"L x 12-1/2"D x 12-1/2"H
  • 30 Day return policy


Belva BAK42BL

4 Gauge Premium (CCA) Copper Clad Aluminum Complete 2-Channel Amplifier Wiring Kit with RCA for Amplifiers up to 1200 Watts - BLUE
Quantity: 1

Product Details:

  • Complete 4 Gauge 2-Channel Amplifier Installation Kit
  • Designed for car audio systems up to 1200 watts RMS
  • Premium Powerflex power and ground wire provides optimal power transfer
  • Belva CCA wire is made from 30% copper while the competition uses only 10%
  • Helical Twist Construction Audio Interconnect RCA cables minimize noise and interference
  • MINI-ANL Fuse holder with a 80 amp fuse offers ideal protection for high powered systems
  • Complies to American Wire Gauge standards
  • Also available in Black and Red
  • Authorized Internet Dealer
  • 1-year Manufacturer's Warranty

Kit includes:

  1. 17 ft. (5.2 meters) Blue 4 gauge power wire
  2. 3 ft. (.91 meters) Black 4 gauge ground wire
  3. 17 ft. (5.2 meters) Gray 18 gauge remote lead wire
  4. 17 ft. (5.2 meters) Helical Twist 2-channel RCA interconnect cable
  5. 20 ft. (6.1 meters) 16 Gauge Speaker cable
  6. One MINI-ANL Fuse Holder with a 80 amp fuse
  7. One Black rubber firewall grommet
  8. One 4 Gauge Blue chrome plated ring terminals
  9. One 4 Gauge Black chrome plated ring terminal
  10. Three 18 Gauge Blue Spade terminal
  11. Two 18 Gauge Black Spade terminal
  12. One 18 Gauge Red butt connector
  13. Ten 4" Black zip ties

Best selling similar products

NPKG212 small

NVX NPKG212 Dual 12" Bass Package

• 12" Loaded Dual Subwoofer Enclosure with Amplifier
• 500 watts RMS
• Class D Amplifier
• Variable Bass Boost
• Speaker-Level Inputs
• Wired Remote Bass Level Control

(11)

$374.99

List price $419.99

MB210SP small

MTX Audio Magnum MB210SP

• 10" Amplified Loaded Subwoofer System
• 400 watts RMS
• Built-In Class D amplifier
• Variable bass boost
• Speaker-level inputs

(65)

$269.95

List price $299.95

F-150EX-09A small

MTX F-150EX-09A

• 10" Amplified Loaded Subwoofer System
• 250 watts RMS
• Built-In Class D amplifier
• Speaker-level inputs
• External bass control

$719.95

List price $637.95

JBLBassPro 12 small

JBL BassPro 12

• 12" Amplified Loaded Subwoofer System
• 150 watts RMS
• Built-In Class D Amplifier
• Variable Bass Boost
• Speaker-Level Inputs

(1)

$364.95

List price $419.95

W10S4_2, BXD3K, BAK42BK small

(2) Alpine W10S4 10" Bass Subwoofers + Belva 3000W Amplifier + 4 Gauge Amp Kit

• 750W Max
• 250W RMS
• Polypropylene-Mica cone
• High-excursion poly-foam surround
• High-strength custom steel frame
• Progressive Wavelit Ribs (P.W.R.) cone design

(82)

$364.88

List price $489.98

RTP8A small

MTX Audio RTP8A

• 8" Amplified Loaded Subwoofer System
• 120 watts RMS (360 watts Peak)
• Built-In amplifier
• Variable bass boost
• Speaker-Level Inputs
• EBC wired remote bass level control

(8)

$199.95

List price $219.95

TNP212D2 small

MTX Audio TNP212D2

• 12" Amplified Loaded Subwoofer System
• 400 watts RMS
MTX TN250/1 amplifier included
• Selectable bass boost
• Speaker-level (high-level) inputs (adapter included)
• Wired remote bass level control

(196)

$369.95

List price $399.95

MBQBRO-302 small

MB Quart MBQBRO-302

• 12" Amplified Loaded Subwoofer System
• 400 watts peak
• Built-In class D amplifier
• Variable bass boost
• Speaker-level (high-level) inputs (Requires adapter like the Kicker KISL)

$679.99

List price $899.99

VAD17001_VCW122 small

NVX VAD17001 with VCW122v3

• RMS: 800 x 1 @ 4 ohm, 1350W x 1 @ 2 ohm, 1700W x 1 @ 1 ohm
• Total RMS Power: 1700W
• CEA-2006 Compliant
• Wired Bass Remote Included
• Efficient Class D Design • RMS Power: 1200 Watts
• 3” 4-Layer High-Temperature Black Aluminum Voice coil
• Carbon Fiber Enhanced Non-Pressed Paper Cone
• Custom High Roll foam surround with black nylon stitching
• 202 oz. Triple-stacked High Energy ferrite magnet
• Die Cast aluminum vented basket

(239)

$499.98

List price $623.98

Specifications & Details


Series
Series
Punch Series
Subwoofer Amplifier Power Specifications
RMS Power @ 4 ohms
200 watts x 1 channel
RMS Power @ 2 ohms
300 watts x 1 channel
Amplifier Specifications
Amplifier Class
A/B
Number of Channels
1 - Mono
Maximum Input Gauge Size
4 AWG
THD at Rated RMS Power
<1.00%
Speaker Level Inputs
Optional (Requires Accessory Adapter)
Preamp Outputs
1 pair
Built-in Crossover
Low-Pass (LP)
High-Pass (HP)
Full (AP)
High-Pass Crossover Frequency
50 - 250 Hz
Low-Pass Crossover Frequency
50 - 250 Hz
Signal-to-Noise Ratio
105 dB
Bass Boost
0 - 18 dB
Remote bass/level controller
Optional (Accessory required and sold separately)
Fuse Rating
50A Fuse Recommended, Not Included
CEA-2031 Compliant
Yes
Warranty and Return Policy
Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Manufacturer

Item Details


Manufacturer:

Model Number:

BAK42,MDFS10,10W1v3-2,P300X1

Weight:

38.57lbs

Internal SKU:

p300x1_10w1v32_mdfs10_bak42

Internal Product ID:

176973

Customer Ratings & Reviews


Rockford Fosgate P300X1 + JL 10W1v32 Sub + Free Sealed Enclosure and Amp Kit thumbnail image

5 star
81%
4 star
17%
3 star
3%
2 star
0%
1 star
0%



Durability
4.8
Value
4.9
Features
4.7
Design
4.8
Usability
4.8

Customer Photos & Videos


Customer Reviews

Sort by:

Loading...

High Quality Box!

The following review is for MDFS10, which is a part of the bundle you are viewing.

I use this box for my Rockford Fosgate 10 and it sounds amazing in my hatch. Connectors felt solid, box felt solid. 100% recommend this!

By Franklin on September 7, 2014

127 found this helpful


Great box for the $.

The following review is for MDFS10, which is a part of the bundle you are viewing.

Dropped a RF prime In and sounds great. Well built. Great value.

By Chris on September 20, 2012

130 found this helpful


Great Value!

The following review is for MDFS10, which is a part of the bundle you are viewing.

Sturdy, fits like a glove not too big, not too small either. Can't make it for the amount they sell it.

By 56 Buick on October 20, 2012

129 found this helpful


FREE box...

The following review is for MDFS10, which is a part of the bundle you are viewing.

Box is well built, its hard to mess up building a small sealed box.. The only problem was sub opening wasn't large enough for my sub, 5 minutes with a jigsaw and vacumn took care of that though..

By Bryan on September 18, 2013

126 found this helpful


Decent Small Box

The following review is for MDFS10, which is a part of the bundle you are viewing.

For the money it is a pretty good product. The carpet is a nice black. Very dark and very clean. The box is solid and can take a beating. The terminal cup is nice as its a binding post and not those crappy pressure tabs. Good box, decent sealing, good carpet.

By Lori on October 6, 2010

125 found this helpful


well built for price

The following review is for MDFS10, which is a part of the bundle you are viewing.

i have a dvc pioneer 10" sub that fits perfectly in this box and sounds great. looks good in trunk and still gives me room to put stuff in it

By matt on January 24, 2010

126 found this helpful


Nice enclosure

The following review is for MDFS10, which is a part of the bundle you are viewing.

Not much can really be said about a sub enclosure, other than it does its job well. My Rockford Fosgate P1S2-10 fit in snuggly. The only thing that was a tad iffy was that when drilling once the bit went through it would catch of the inside insulation and mess it up, but quite honestly it didn't really bother me at all. Good enclosure.

By Esteban on December 11, 2014

116 found this helpful


Quality at a great price

The following review is for MDFS10, which is a part of the bundle you are viewing.

I got this box for an Earthquake dbxi10 and thankfully the sub fit right in despite me thinking the measurements for the cutout were a bit off. The little bit of polyfill lining is a nice touch. The box felt secure and solid with a good bit of weight for the quality of wood. It definitely didn't feel like a cheap particle board box. The carpeting was on snug and looked good as well. Great pre-fab box for your sub. I expect it to last but can't say for sure as I just got it in recently.

By Josh on October 25, 2012

123 found this helpful


Best boxes on the internet

The following review is for MDFS10, which is a part of the bundle you are viewing.

great constructed boxes...great price...def recommend

By Boss on February 26, 2011

118 found this helpful


Great Product!!!!

The following review is for MDFS10, which is a part of the bundle you are viewing.

I totally recommend this product, excellent value! super fast shipping

By Mr.C. on March 17, 2014

124 found this helpful



Save up to 10 different vehicles in your garage

Add vehicle
Loading...
Identify your vehicle and submodel details
  • Owner's manual
  • Vehicle's insurance card
  • Vehicle registration
  • Vehicle produced after 2005: Inside driver's side door
  • Vehicle produced before 2005: Rear passenger doorjamb, glove box, center console, or engine compartment
Car Info Side Door Icon
Vehicle Registration Icon
Vehicle Insurance Icon

Modern vehicles often require specific brackets, wiring harnesses, and mounting solutions. A fit guide ensures:

  • You see only parts engineered for your exact vehicle
  • You avoid incompatible radios, speakers, or wiring
  • Installation is smoother, faster, and frustration-free
  • You get the correct accessories the first time

Whether you're replacing a factory stereo or upgrading your entire audio system, the Fit Finder eliminates uncertainty.