Kenwood KFC-W112S 12" Sub + 400W 2-Channel Amp + Sealed Enclosure + Amp Kit

400W Complete Car Audio Bass Package

Kenwood
Shop all Kenwood

We apologize

This item has been discontinued

Description


Kenwood

Authorized dealer




Good Quality Bass
with the Kenwood KFC-W112S

Not everyone is looking for window shattering bass, some of us just want enough bass to enhance the all around sound of our car audio systems. Kenwood's KFC-W112S 12" Single 8-ohm subwoofer allows you to do just that. This subwoofer is meant to be paired up with a second KFC-W112S subwoofer, and wired in parallel to a final impedance of 4 ohms. The advantage here is that you are able to run two subs at a 4 ohm impedance which is more stable and produces a cleaner output with less thermal discharge from the amplifier. Also by having this subwoofer paired with a second you increase the amount of air that is being moved which in turn creates a deeper sounding bass. The polypropylene injection molded woofer cone and urethane surround provide rigidity and stability. So if you are looking to add some bass at a stable impedance, without spending a bundle, then two of these subwoofers are the perfect match for you.



Kenwood KFC-W112S

200W 12" Performance Series Single 8 ohm Subwoofer
Quantity: 1

General Features:

  • 12" Single 8-Ohm KFC Series Subwoofers
  • Power Handling:
    • Peak: 800 watts each
    • RMS: 200 watts each
  • Recommended power range: 100 - 250 watts RMS
  • Impedance: Single 8-Ohm
  • Polypropylene injection-molded woofer cone
  • High-roll urethane surround
  • Silver-plated terminals
  • Steel frame basket
  • Ferrite magnet
  • 2" high temperature voice coil
  • 28.9 oz. ferrite magnet structure
  • Frequency response: 28 - 800 Hz
  • Sensitivity: 90 dB
  • Mounting depth: 5-9/16"
  • Cutout dimensions: 10-13/16"
  • 1-year Sonic Electronix Warranty

Scosche SE12R

1.25 Cubic Feet 12" Sealed Car Audio Subwoofer Enclosure
Quantity: 1

General Features:

  • Will fit most 12" subwoofers
  • Provides better subwoofer sound quality
  • Tightly sealed subwoofer enclosure to prevent air leaks
  • Pre-wired with power cables
  • Power inputs in the back of enclosure
  • Recessed side panels for easy handling
  • Approx 1.25 cubic feet of air space
  • Dimensions: 17.15"W x 12.0"D x 17.15"H
  • Authorized Internet Dealer
  • 1-year Manufacturer's Warranty

Belva BAK82

8 Gauge Premium (CCA) Copper Clad Aluminum Complete 2-Channel Amplifier Wiring Kit with RCA for Amplifiers up to 600 Watts - RED
Quantity: 1

Product Details:

  • Complete 8 Gauge 2-Channel Amplifier Installation Kit
  • Designed for car audio systems up to 600 watts RMS
  • Premium Powerflex power and ground wire provides optimal power transfer
  • Belva CCA wire is made from 30% copper while the competition uses only 10%
  • Helical Twist Construction Audio Interconnect RCA cables minimize noise and interference
  • MINI-ANL Fuse holder with a 60 amp fuse offers ideal protection for high powered systems
  • Complies to American Wire Gauge standards
  • Also available in Blue
  • Authorized Internet Dealer
  • 1-year Manufacturer's Warranty

Kit includes:

  1. 17 ft. (5.2 meters) Red 8 gauge power wire
  2. 3 ft. (.91 meters) Black 8 gauge ground wire
  3. 17 ft. (5.2 meters) Gray 18 gauge remote lead wire
  4. 17 ft. (5.2 meters) Helical Twist 2-channel RCA interconnect cable
  5. 20 ft. (6.1 meters) 16 Gauge Speaker cable
  6. One MINI-ANL Fuse Holder with a 60 amp fuse
  7. One Black rubber firewall grommet
  8. One 8 Gauge Red chrome plated ring terminals
  9. One 8 Gauge Black chrome plated ring terminal
  10. Three 18 Gauge Red Spade terminal
  11. Two 18 Gauge Black Spade terminal
  12. One 18 Gauge Red butt connector
  13. Ten 4" Black zip ties

Dual XPE2700

400W 2-Channel MOSFET XPE Series Power Amplifier
Quantity: 1

Product Details:

  • Dual XPE2700
  • XPE Series 2-Channel Class A/B Car Amplifier
  • RMS Power Rating:
    • 4 ohms: 50 watts x 2 chan.
    • 2 ohms: 75 watts x 2 chan.
    • Bridged, 4 ohms: 150 watts x 1 chan.
  • Dynamic power output: 400 watts
  • Pulse Width Modulated MOSFET power supply
  • Bi-color LED status indicators
  • Selectable bass boost (0, 6, 12 dB at 45 Hz)
  • Soft Start Turn-on
  • 2/1 channel operation
  • Speaker-level inputs with signal sensing for automatic turn-on
  • 3-Way System Protection circuitry (thermal, overload, and speaker short protection)
  • Heavy duty aluminum alloy heatsink for extreme heat dissipation
  • Silver-plated RCA level inputs
  • Silver-plated screw terminals
  • Input sensitivity:
    • Low level: 125mV-5V
    • High level: 250mV-10V
  • Variable high-pass filter (50-500 Hz, 24 dB/octave)
  • Variable low-pass filter (50-500 Hz, 24 dB/octave)
  • CEA-2006 compliant amplifier
  • Frequency response: 20-20,000 Hz
  • Dimensions: 8-15/16"L x 8-13/16"W x 2-1/16"H
  • 10-gauge power and ground wiring is required for installation. Contact us for information regarding a discount on select amplifier kits when purchased together with this amplifier.
  • Authorized Internet Dealer
  • 1-year Manufacturer's warranty

Specifications & Details


Subwoofer Specifications
Series
Performance Series
Subwoofer Size
12"
RMS Power Handling
200 watts
Peak Power Handling
800 watts
Woofer Composition
Polypropylene
Woofer Surround
Urethane
Sensitivity
90 dB
Frequency Response
28 - 800 Hz
Subwoofer Design
Round / Circle
Warranty and Return Policy
Parts Warranty Duration
1 year
Labor Warranty Duration
1 year
Warranty Provider
Sonic Electronix

Item Details


Manufacturer:

Model Number:

XPE2700,BAK82,SE12R,KFC-W112S

Weight:

36.30lbs

Internal SKU:

kfcw112s_ampsubcombo

Internal Product ID:

177537

Customer Ratings & Reviews



5 star
67%
4 star
26%
3 star
5%
2 star
1%
1 star
1%



Durability
4.7
Value
4.7
Features
4.5
Design
4.6
Usability
4.8

Customer Reviews

Sort by:

Loading...

BAK 82

The following review is for BAK82, which is a part of the bundle you are viewing.

Nice package, quality wire but could more end connectors for the larger wire.

By Sam on June 19, 2014

137

found this helpful.

Good product

The following review is for BAK82, which is a part of the bundle you are viewing.

It's exactly what you need for your car amp installation. I bought this kit with Kenwood KAC-1502S amp for 75 bucks. Good deal from Sonic Electronix.

By Collins on January 6, 2014

126

found this helpful.

Don't know what the other guy is talking about.

The following review is for BAK82, which is a part of the bundle you are viewing.

This kit was awesome and included with my package that I bought. In comparison to others for the same price, there is simply not a comparison and the other review is just wrong on so many levels I felt compelled to write this.

The reality is there are a lot of real shoddy amp kits and wire as a whole being used in car audio in terms of cheap amp kits that have over-insulating wires and fake gauge ratings, huge amounts of aluminum, lousy RCA cables, fuse holders and other accessories. BUT and a BIG BUT, this kit excels in those areas where others fall flat on their face. I have bought a few inexpensive 8 gauge kits in my day and XScorpion, Raptor, Install Bay and others haven't even given me the 8 gauge of wire that I paid for, and in some cases gave me wire that heated up to a dangerous level due to the actual make up of the wire.

I also literally laughed when I see that the other reviewer was intending to use spade terminals to connect his amp power and ground wire... It is for the SPEAKER wire knucklehead :-). I am an installer and the smaller accessories work just fine when you use them correctly. Most amps will still work with them when used with the speaker wire. Of course one can be used for the remote wire connection to the amp and the other end with the butt connector being used to connect to the stereo. The funny thing is, if you do not need them, who cares? It is like ordering this kit for a compact car or single cab pickup. You will not use all of the power wire for these applications, so do you complain that the manufacturer gave you extra wire? That just made me laugh.

Now, onto the other accessories. The AFS fuse and holder that are included are so far superior to others in this price range and the amount of copper (albeit CCA) is much better than others in the price range. Lastly, the RCAs included are awesome for the price. I cannot find ANYTHING to complain about here for $21.99.

All in all, you will not get a better value for the money.

By Double Down on August 14, 2012

115

found this helpful.

Great kit for the cost

The following review is for BAK82, which is a part of the bundle you are viewing.

Very nice kit for $18.
Wire seems adequately thick. Good quality fuse (not AGU) and fuse holder. RCA's feel durable. Decent assortment of accessories. All together a solid budget kit IMO.

By n2audio on September 24, 2014

120

found this helpful.

Good product for the price

The following review is for BAK82, which is a part of the bundle you are viewing.

Good wiring package, good quality fuse holder and wires, I would like more connectors on it and maybe some tube for the power wire, but overall is a good kit.

By Alfredo on October 29, 2014

116

found this helpful.

Good Purchase

The following review is for BAK82, which is a part of the bundle you are viewing.

I used this kit to install a 2 channel Boss amp. The quality of the pieces in this kit is five stars, but I'm giving it 4 because it is my belief that to do a clean install you need (4) 8 gauge terminals (one at the batt, one at the amp, one at ground, one at the amp), not just two. I had to spend an extra six bucks at Orchard for the extra terminals, but since the cost of the kit here at Sonic was only $20 at the time, it was still a good deal.

By Jumbo Dumbo on December 19, 2013

109

found this helpful.

Good kit

The following review is for BAK82, which is a part of the bundle you are viewing.

Good kit for basic setups. Using it right now in my mothers system powering a simple 12. Could handle more if needed.

Pros: Handles power, Wires are HQ, More copper than rubber, Wires are good length, Fuse is HQ, Comes with lots of ties and rubbers.

Cons: None

I would recommend this kit to anyone who has a simple system. All around good kit.

By Mitch on January 31, 2014

116

found this helpful.

Great wiring kit

The following review is for BAK82, which is a part of the bundle you are viewing.

works great on my MB Quart 2x100 watt amp.

By Eric on November 29, 2013

108

found this helpful.

Good Kit

The following review is for BAK82, which is a part of the bundle you are viewing.

Great kit for the price. the price is good. Long wires.

By Joshua on December 8, 2013

108

found this helpful.

Belva BAK82

The following review is for BAK82, which is a part of the bundle you are viewing.

Worked very well for the money, great value for my system! Only thing that kept me from giving this 5 stars across the board is the design of the fuse holder and how you have to change/connect the fuse, minimal complaint.

By Dwight on April 9, 2014

104

found this helpful.

Add-ons


Similar Products


Best selling similar products

Rockford Fosgate Punch P3-2X12

• Dual Punch P3 12" Loaded Subwoofer Enclosure
• 2400W Peak
• 1200W RMS
• Constructed with Durable 5/8" MDF
• High Current Binding Posts
• Durable Black Carpet Covering
• Computer Optimized Design
• 1 Ohm Final Impedance

(34)

$659.99

Kicker TRTP122 (48TRTP122)

• Sealed downward-firing enclosure with one CompRT 12" subwoofer and passive radiator
• 3/4" medium-density fiberboard construction covered with carpet
• 2-ohm total impedance
• Power Handling: 500 watts RMS (1000 watts peak power)
• Sensitivity: 98 dB
• Frequency Response: 25-500 Hz
• Dimensions: 27-1/2"W x 14-5/8"D x 6-1/8"H

(1)

$296.96

JL Audio CP212-W0v3

• Dual 12" 12W0v3-4 Loaded Ported Enclosure
• 1200W Peak
• 600W RMS
• Top-Quality MDF Construction
• Durable Dark Gray Carpet Finish
• Five-Way Binding Post Connectors
• Embroidered JL Audio Logo

(11)

$499.99

NVX SMW10D4 with Sealed Truck Enclosure

• 700 watts Watts Peak
• 350 watts Watts RMS
• Carbon Fiber Reinforced Polypropylene Cone
• Butyl Rubber Surround
• Includes Depth Extension Clearance Plate
• Includes Sealed Enclosure

(3)

$109.99

MTX TNE212DV

• 1000W Dual 12" Vented Subwoofer Enclosure
• 12" Subwoofer
• 5/8" MDF Enclosure with Black Carpet Finish
• Enclosure Dimensions: 11" TD x 13.5" BD x 29.5" W x 14" H

(8)

$219.95

Related Searches


XPE2700,BAK82,SE12R,KFC-W112S small

Item added to your cart.

Price: $180.03

Essential add-ons
NVX Speaker Wire (XWS1225)

25 ft. of True 12 Gauge EnvyFlex Speaker Cable/Wire (100% Oxygen-Free Copper)

$49.99

$29.99

Add to cart
NVX Sound Dampening Trunk Kit (SDTK20)

20 Square Feet of Sound Dampening Material (Five 18" x 32" Pieces)

$89.99

$59.99

Add to cart
NVX Sound Dampening Rubber Roller (SDRLR1)

Universal, Professional Heavy Duty Roller for Sound Damping/Dampening

$9.99

$7.99

Add to cart

Add vehicle

Save up to 10 different vehicles in your garage

Loading...
< Back