Install a new Double-DIN car stereo in select 1995-2011 vehicles from Ford, Mazda, Mercury
• Double-DIN Installation Dash Kit for Select select 1995-2011 vehicles from Ford, Mazda, Mercury Vehicles
• Gapless Fit
• Matches the Factory Dash Color
• High-Grade ABS plastic construction
• Factory style texture
This stereo installation kit is engineered to help you install an aftermarket 4” tall (Double-DIN) radio into the original vehicle dashboard. This dash kit helps make radio replacement easier and is designed to match the original look and feel of the vehicle’s dashboard. Modifications to the dashboard are required for this installation and instructions are included. Installing an aftermarket radio can upgrade the sound quality and provide additional features the original factory radio couldn’t offer but requires this dash kit to make it fit.
INSTALLATION NOTE: Sub dash modifications are necessary to use this dash kit. You will need to trim the sub dash to gain suitable depth and height. Consult a professional installer and/or the the manual linked further below for details.
INSTALLATION NOTE: Once the kit is snapped in, it cannot be removed without dash panel removal
Please use our Fitment Guide to determine specific compatibility for the submodel and audio features
Internal Product ID:
17868
Made the install look great
This item I needed to install a 4" radio into my 2000 F250. Worked like a charm. When using you have to grind a little on the bottom of dash to except this but once on radio snapped right into the truck.. Gave it a totally finished look.. Very pleased..
31
found this helpful.I wanted to replace it after I got it installed
I installed a Pioneer AVIC-X910BT into my 2002 Ford Escape XLT. Putting a 2Din headunit into this vehicle involves cutting the sub-dash to clearance for the unit. This was disclosed on the website and wasn't much of a surprise to me. I tarped off the inside of my car with old bedsheets and used a rotozip with a carbide rasp attachment which made quick work of removing the plastic material.
The Installation kit attached easily to the head-unit with a couple of screws and I used a harness adapter so I didn't have to cut my factory wires. After making making the connections and soldering them together, I bound them up with zip ties and inserted the unit into the dash.
The dash in my vehicle has quite a bit of room behind it so with a bit of maneuvering I was able to slide the unit and all it's wires (there are a lot of them!) into the dash opening. Unfortunately, the kit doesn't have the fit & finish like my factory stereo had. This kit has uneven gaps between the bezel and the mounting kit. I think it falls short of what an OEM installation would be.
(This website should let you upload a pic)
I brought my car over to my local "Extreme" audio installation center and they admitted to using a slightly different mounting system but which is essentially the same. It would have been better being a black metal plate with a DD hole to stick the radio through. This would have eliminated the gap at the bottom which is filled with a thin plastic filler piece.
Overall, I'm really disappointed with the available dash kits for the 2001-07 Ford Escapes but now that it's been in my car for six months I've kind of gotten used to it.
31
found this helpful.Metra in dash kit
The kit is great, my Mercury Marauder has what Ford likes to cal 2 din radio opening but the dash is not big enough to fit a normal 2 din radio. With a little shaving of the top of the dash board and the Metra install kit I was able to fit a Kenwood touch screen DVD navigation head unit in my car. I would recommend this product for anyone wanting to install a 2 din radio on a Ford product.
31
found this helpful.good value
Worked well, sticks out a little as the Sportrac dash is angled vertically, but still functions well.
28
found this helpful.Works as advertised
Used to install in a 2000 Ford F350 CC. The supplied screws were almost too short, but seem to be holding. Fairly easy to install, but does require the top and bottom of the dash opening to be trimmed. The sides can be left alone except near the corners to allow brackets to sit in flush. Instructions are okay, but as with most things, rather vague. Looks are pretty decent.
27
found this helpful.Good for Ford Crown Victoria
Installed this unit in both a 2003 & 2007 Ford Crown Victoria. Lots of questions around installing a double DIN unit in the early cars, but I did not have any issues. The only modification needed is the trimming of the small plastic ridge that surrounds the opening, then the Metra 95-5817 will slide right in.
26
found this helpful.Work Good
Good fitment and good product
26
found this helpful.Great product for my 2000 Ford F350
Product was just what I needed to finish the installation of a double DIN player into my DIN and a half opening on my Ford F350.
25
found this helpful.Excellent Product
If you are adding a touchscreen to your F-250 pickup this is the perfect
install kit to go with it. It is very easy to install did not have to file to much of the dash out to make it work.
25
found this helpful.very good
made istallation very easy
24
found this helpful.Best selling similar products
• Single/Double DIN Install Dash Kit
• Accommodates ISO Double DIN Mount
• Painted to Match Factory Dash Color
• High-Grade ABS Plastic Construction
• Factory Style Texture
• Includes Steering Wheel Control Interface
• For select 2006-2017 vehicles from GMC, Chevrolet, Cadillac Vehicles
(5)
$109.95
• Double DIN Install Dash Kit
• Accommodates ISO Double DIN Mount
• Painted to Match Factory Dash Color
• High-Grade ABS Plastic Construction
• Factory Style Texture
• Compatible with select 1997-2001 Jeep Cherokee Vehicles
(4)
$59.99
• Retains backup camera
• Metal brackets, t-harness trim included
• Replacement bezel for early ford vehicles with navigation
• Factory bezel and buttons are retained
• Black finish
$129.99
Save up to 10 different vehicles in your garage